| Date |
Text |
| 2015-09-19 11:45:03 | ****CORRECTIONS**** |
| | SAMANTHA HILL, BUILDING PLANS EXAMINER |
| | 561-805-6724 [email protected] |
| | FBC FLORIDA BUILDING CODE 5TH EDITION RESIDENTIAL |
| | |
| | 1. PLANS ARE TO BE ARCHITECTURAL QUALITY, TO SCALE. IT |
| | IS DIFFICULT TO PROVIDE A REVIEW AND CORRECTION LIST. |
| | OVER 20 UNNUMBERED AND UNCOLLATED 8.5"X11" SHEETS WERE |
| | SUBMITTED. |
| | |
| | 107.2.1 INFORMATION ON CONSTRUCTION DOCUMENTS. |
| | CONSTRUCTION DOCUMENTS SHALL BE |
| | DIMENSIONED AND DRAWN UPON SUITABLE MATERIAL. |
| | ELECTRONIC MEDIA DOCUMENTS SHALL BE |
| | SUBMITTED WHEN APPROVED BY THE BUILDING OFFICIAL. |
| | CONSTRUCTION DOCUMENTS SHALL BE OF SUFFICIENT |
| | CLARITY TO INDICATE THE LOCATION, NATURE AND EXTENT OF |
| | THE WORK PROPOSED AND SHOW IN |
| | DETAIL THAT IT WILL CONFORM TO THE PROVISIONS OF THIS |
| | CODE AND RELEVANT LAWS, ORDINANCES, RULES |
| | AND REGULATIONS, AS DETERMINED BY THE BUILDING |
| | OFFICIAL. SUCH DRAWINGS AND SPECIFICATIONS SHALL |
| | CONTAIN INFORMATION, IN THE FORM OF NOTES OR OTHERWISE, |
| | AS TO THE QUALITY OF MATERIALS, WHERE |
| | QUALITY IS ESSENTIAL TO CONFORMITY WITH THE TECHNICAL |
| | CODES. SUCH INFORMATION SHALL BE SPECIFIC, |
| | AND THE TECHNICAL CODES SHALL NOT BE CITED AS A WHOLE |
| | OR IN PART, NOR SHALL THE TERM "LEGAL" OR |
| | ITS EQUIVALENT BE USED AS A SUBSTITUTE FOR SPECIFIC |
| | INFORMATION. ALL INFORMATION, DRAWINGS, |
| | SPECIFICATIONS AND ACCOMPANYING DATA SHALL BEAR THE |
| | NAME AND SIGNATURE OF THE PERSON |
| | RESPONSIBLE FOR THE DESIGN. (SEE ALSO SECTION 107.3.5). |
| | |
| | 2. PLANS ARE TO INCLUDE THE WIND DESIGN CRITERIA, FBC |
| | 5TH ED. RESIDENTIAL 301 (WIND SPEED, EXPOSURE |
| | CLASSIFICATION, RISK CATEGORY) AS WELL AS THE METHOD |
| | USED FOR DESIGN (ONE OF THE METHODS IN SECTION 301). IF |
| | ENGINEERING (ASCE7-10) IS USED AS THE METHOD OF DESIGN, |
| | PROVIDE CALCULATIONS. |
| | |
| | 3. FLORIDA STATE OR LOCAL PRODUCT APPROVAL REQUIRED FOR |
| | COMPONENTS AND CLADDING. AS FLINTLASTIC SPEC SHEETS |
| | WERE SUBMITTED, IT APPEARS THAT A ROOF IS PROPOSED. |
| | PROVIDE THE PRODUCT APPROVAL FOR THE ROOF COVERING, AND |
| | ON THE PRODUCT APPROVAL, INDICATE WHICH OPTION IS |
| | PROPOSED. IF THE PRODUCT APPROVAL DOES NOT REQUIRE |
| | ENGINEERING FOR ENHANCED FASTENING, IT IS POSSIBLE THAT |
| | THIS MAY BE DONE FOR YOU (BUT YOU NEED TO PROVIDE THE |
| | ROOF COVERING PRODUCT APPROVAL). |
| | |
| | |
