| Plan Review Notes For Permit 15070263 |
| Permit Number |
15070263 |
|
| Review Stop |
M |
| Sequence Number |
2 |
|
| Notes |
| Date |
Text |
| 2015-09-02 11:11:56 | 2ND REVIEW: FBC 2014 MECHANICAL | | | PERMIT #15070263 | | | 9/2/15 | | | | | | 1) AS PREVIOUSLY REQUESTED IN THE 1ST REVIEW PROVIDE AC | | | COOLING AND HEATING CALCULATIONS FOR THE NEW SYSTEM: | | | C403.2.1 CALCULATION OF HEATING AND COOLING LOADS. | | | DESIGN LOADS SHALL BE DETERMINED IN ACCORDANCE WITH THE | | | PROCEDURES DESCRIBED IN THE ASHRAE/ACCA STANDARD 183 OR | | | ACCA MANUAL N AND SHALL BE ATTACHED TO THE CODE | | | COMPLIANCE FORM SUBMITTED TO THE BUILDING DEPARTMENT | | | WHEN THE BUILDING IS PERMITTED OR, IN THE EVENT THE | | | MECHANICAL PERMIT IS OBTAINED AT A LATER TIME, THE | | | SIZING CALCULATION SHALL BE SUBMITTED WITH THE | | | APPLICATION FOR THE MECHANICAL PERMIT. HEATING AND | | | COOLING LOADS SHALL BE ADJUSTED TO ACCOUNT FOR LOAD | | | REDUCTIONS THAT ARE ACHIEVED WHEN ENERGY RECOVERY | | | SYSTEMS ARE UTILIZED IN THE HVAC SYSTEM IN ACCORDANCE | | | WITH THE ASHRAEHVAC SYSTEMS AND EQUIPMENT HANDBOOK. | | | ALTERNATIVELY, DESIGN LOADS SHALL BE DETERMINED BY AN | | | APPROVED EQUIVALENT COMPUTATION PROCEDURE, USING THE | | | DESIGN PARAMETERS SPECIFIED IN CHAPTER 3. | | | | | | CHRISTOPHER L. COLE | | | MECHANICAL PLANS EXAMINER | | | 561-805-6719 | | | [email protected] | | | |
|
