| Date |
Text |
| 2015-06-04 17:11:29 | 6/4/2015 |
| | PROJECT: A/V AT CONVENTION CENTER |
| | PERMIT#: 15040163 |
| | CODE: 2008 EDITION OF THE NEC, 2010 EDITION OF THE FBC |
| | ,2010 WPB AMENDMENTS TO THE FBC, CHAPTER 1, |
| | ADMINISTRATION, 2012 FBC SUPPLEMENTS. |
| | 1ST ELECTRICAL PLAN REVIEW |
| | ACTION: DENIED |
| | |
| | REVISE YOUR PLANS IN RESPONSE TO THE FOLLOWING REVIEW |
| | COMMENTS: |
| | |
| | 1) FEEDER SCHEDULE MARK 5 AND 6 CALLS FOR A 1" CONDUIT |
| | FOR FEEDERS TOO LARGE FOR A 1" CONDUIT. PLEASE REVISE |
| | ACCORDINGLY. |
| | |
| | 2) PANEL VW2, CIRCUIT #2 INDICATES #10 WIRE CONNECTED |
| | TO A 40AMP OCPD . #10 CU WIRE IS NOT APPROVED FOR |
| | 40AMPS. |
| | |
| | 3) CABLES INSTALLED IN CABLE TRAY TO BE APPROVED FOR |
| | USE IN A CABLE TRAY AND BE LISTED AND IDENTIFIED FOR |
| | THIS USE. |
| | |
| | 4) INDICATE THE SIZE OF THE TRANSFORMERS. |
| | |
| | 5) PROVIDE MANUFACTURER LISTING INFORMATION FOR THE A/V |
| | EQUIPMENT. |
| | |
| | 6) PANEL M5, CIRCUIT # 40/42 IS IDENTIFIED AS A 100AMP |
| | 3POLE CIRCUIT CONNECTED TO #6 WIRE FOR LC2. FIRST OF |
| | ALL IS IT A 3PHASE OR SINGLE PHASE CIRCUIT? THE CLARIFY |
| | THE CIRCUIT SIZE AND WIRE CONNECTED TO IT. #6CU WIRE IS |
| | NOT APPROVED FOR 100AMPS. |
| | |
| | 7) THERE IS A SIMILAR ISSUE IN PANEL EM8 ON CIRCUIT 2 |
| | CALLS FOR THE USE OF A 100AMP OCPD WITH #6 WIRE. #6CU |
| | WIRE IS NOT APPROVED FOR 100AMPS. |
| | |
| | 8) CLEARLIY IDENTIFY ALL EQUIPMENT AND PANEL LOCATIONS |
| | ON THE FLOOR PLAN. |
| | |
| | WHEN RESUBMITTING, IT IS HELPFUL TO PROVIDE A RESPONSE |
| | LETTER ADDRESSING EACH ITEM ALONG WITH THE CITY |
| | RE-SUBMITTAL FORM. SEE LINK: |
| | HTTP://WPB.ORG/DEVELOPMENT/WP-CONTENT/UPLOADS/SITES/33/ |
| | 2013/09/APPLICATION_RESUBMITTAL_FORM_04132010.PDF |
| | |
| | ADDITIONALLY, IT IS REQUIRED TO INSERT THE CORRECTED |
| | PAGES INTO THE DENIED SUBMITTAL PACKAGE. VOID THE |
| | PREVIOUSLY REVIEWED SHEETS AND LEAVE FOR COMPARATIVE |
| | REVIEW. |
| | DAVID HAYES, ELECTRICAL PLANS EXAMINER, PX3421, |
| | 561-805-6717 OR [email protected] |
| | |
