| Date |
Text |
| 2015-04-07 18:42:02 | ****CORRECTIONS**** |
| | |
| | SAMANTHA HILL |
| | BUILDING PLANS EXAMINER |
| | [email protected] |
| | 561-805-6724 |
| | |
| | ISSUES TO RESOLVE: |
| | |
| | THE POLE DETAIL HAS BEEN REMOVED FROM THE PLAN RATHER |
| | THAN REVISING. SO, THERE IS NO LONGER A POLE |
| | INSTALLATION DETAIL IN THIS PERMIT PACKAGE. PROVIDE |
| | ONE. THE CALCULATIONS ARE TO SHOW THAT EMBEDMENT IS |
| | ADEQUATE, BUT AN ARCHITECTURAL QUALITY SCALED DRAWING |
| | IS REQUIRED, FBC 107. |
| | |
| | THE CALCULATIONS ARE NOT ORIGINAL, SOME PAGES ARE VERY |
| | DIFFICULT TO READ, AND THE FORMAT IS NOT IN A FORM |
| | ACCEPTABLE TO THE BOARD. FAC61G15-23.002(2)(B): |
| | |
| | (B) WHEN AN ENGINEER MUST SEAL, SIGN AND DATE |
| | ENGINEERING SPECIFICATIONS OR CALCULATIONS UNDER THE |
| | PROVISIONS OF SECTION 471.025, F.S., AND SUBSECTION (1) |
| | OF THIS RULE, AN INDEX SHEET FOR ENGINEERING |
| | SPECIFICATIONS AND CALCULATIONS MAY BE USED. THE INDEX |
| | SHEET MUST BE SIGNED, SEALED AND DATED BY THOSE |
| | PROFESSIONAL ENGINEERS IN RESPONSIBLE CHARGE OF THE |
| | PRODUCTION AND PREPARATION OF EACH SECTION OF THE |
| | ENGINEERING SPECIFICATIONS OR CALCULATIONS, WITH |
| | SUFFICIENT INFORMATION ON INDEX SHEET SO THAT THE USER |
| | WILL BE AWARE OF EACH PORTION OF THE SPECIFICATIONS OR |
| | CALCULATIONS FOR WHICH EACH PROFESSIONAL ENGINEER IS |
| | RESPONSIBLE. IN ADDITION, THE INDEX SHEET SHALL INCLUDE |
| | AT A MINIMUM: |
| | 1. THE NAME, ADDRESS AND LICENSE NUMBER OF EACH |
| | ENGINEER IN RESPONSIBLE CHARGE OF THE PRODUCTION OF ANY |
| | PORTION OF THE CALCULATIONS OR SPECIFICATIONS. |
| | 2. IDENTIFICATION OF THE PROJECT, BY ADDRESS OR BY LOT |
| | NUMBER, BLOCK NUMBER, SECTION OR SUBDIVISION AND CITY |
| | OR COUNTY. |
| | 3. IDENTIFICATION OF THE APPLICABLE BUILDING CODE AND |
| | CHAPTER(S) THAT THE DESIGN IS INTENDED TO MEET. |
| | 4. IDENTIFICATION OF ANY COMPUTER PROGRAM USED FOR |
| | ENGINEERING THE SPECIFICATIONS OR CALCULATIONS. |
| | |
| | I WAS UNABLE TO FIND A CERTIFICATE OF AUTHORIZATION FOR |
| | TAMARACK GROVE ENGINEERING (WWW.MYFLORIDALICENSE.COM). |
| | THIS ENGINEERING BUSINESS LICENSE IS REQUIRED TO |
| | PRACTICE ENGINEERING IN FLORIDA. WHEN REVISING THE |
| | CALCULATIONS TO BE IN COMPLIANCE WITH |
| | FAC61G15-23.002(2)(B), ALSO INCLUDE THE INFORMATION |
| | REQUIRED BY FAC61G15-23.002(3(C): |
| | |
| | (C) IF THE LICENSEE(S) SEALING, SIGNING AND DATING |
| | ENGINEERING SPECIFICATIONS, CALCULATIONS OR REPORTS IS |
| | PRACTICING THROUGH A DULY AUTHORIZED ENGINEERING |
| | BUSINESS, THE NAME, ADDRESS AND CERTIFICATE OF |
| | AUTHORIZATION NUMBER OF THE ENGINEERING BUSINESS SHALL |
| | BE PLACED ON THE INDEX SHEET, SIGNATURE PAGE OR COVER |
| | LETTER INCORPORATED INTO OR ACCOMPANYING ALL |
| | ENGINEERING SPECIFICATIONS, CALCULATIONS OR REPORTS. |
| | |
| | |
