| Plan Review Notes For Permit 15010618 |
| Permit Number |
15010618 |
|
| Review Stop |
E |
| Sequence Number |
2 |
|
| Notes |
| Date |
Text |
| 2015-01-29 09:58:01 | VERIFY COMPLIANCE WITH THE FOLLOWING: | | | | | | 1) NEC 210.4 MULTIWIRE BRANCH CIRCUITS. (A) GENERAL. | | | BRANCH CIRCUITS RECOGNIZED BY THIS ARTICLE SHALL BE | | | PERMITTED AS MULTIWIRE CIRCUITS. A MULTIWIRE CIRCUIT | | | SHALL BE PERMITTED TO BE CONSIDERED AS MULTIPLE | | | CIRCUITS. ALL CONDUCTORS OF A MULTIWIRE BRANCH CIRCUIT | | | SHALL ORIGINATE FROM THE SAME PANELBOARD OR SIMILAR | | | DISTRIBUTION EQUIPMENT. | | | | | | 2) NEC 210.7 BRANCH-CIRCUIT REQUIREMENTS FOR DEVICE | | | CONNECTIONS AND LOCATIONS. | | | (A) RECEPTACLE OUTLET LOCATION. RECEPTACLE OUTLETS | | | SHALL BE LOCATED IN BRANCH CIRCUITS IN ACCORDANCE WITH | | | PART III OF ARTICLE 210. | | | (B) MULTIPLE BRANCH CIRCUITS. WHERE TWO OR MORE BRANCH | | | CIRCUITS SUPPLY DEVICES OR EQUIPMENT ON THE SAME YOKE, | | | A MEANS TO SIMULTANEOUSLY DISCONNECT THE UNGROUNDED | | | CONDUCTORS | | | | | | 3) NEC 300.13 MECHANICAL AND ELECTRICAL CONTINUITY ? | | | CONDUCTORS. (B) DEVICE REMOVAL. IN MULTIWIRE BRANCH | | | CIRCUITS, THE CONTINUITY OF A GROUNDED CONDUCTOR SHALL | | | NOT DEPEND ON DEVICE CONNECTIONS SUCH AS LAMPHOLDERS, | | | RECEPTACLES, AND SO FORTH, WHERE THE REMOVAL OF SUCH | | | DEVICES WOULD INTERRUPT THE CONTINUITY. | | | |
|
