| Date |
Text |
| 2013-02-12 11:01:53 | ****CORRECTIONS**** |
| | SAMANTHA HILL, BUILDING PLANS EXAMINER |
| | 561-805-6724 [email protected] |
| | FBC FLORIDA BUILDING CODE 2010 |
| | FBC R FLORIDA BUILDING CODE 2010 RESIDENTIAL |
| | |
| | |
| | 1. SEE FBC 107.2.1: |
| | |
| | INFORMATION ON CONSTRUCTION DOCUMENTS. CONSTRUCTION |
| | DOCUMENTS SHALL BE DIMENSIONED AND DRAWN UPON SUITABLE |
| | MATERIAL. ELECTRONIC MEDIA DOCUMENTS SHALL BE SUBMITTED |
| | WHEN APPROVED BY THE BUILDING OFFICIAL. CONSTRUCTION |
| | DOCUMENTS SHALL BE OF SUFFICIENT CLARITY TO INDICATE |
| | THE LOCATION, NATURE AND EXTENT OF THE WORK PROPOSED |
| | AND SHOW IN DETAIL THAT IT WILL CONFORM TO THE |
| | PROVISIONS OF THIS CODE AND RELEVANT LAWS, ORDINANCES, |
| | RULES AND REGULATIONS, AS DETERMINED BY THE BUILDING |
| | OFFICIAL. SUCH DRAWINGS AND SPECIFICATIONS SHALL |
| | CONTAIN INFORMATION, IN THE FORM OF NOTES OR OTHERWISE, |
| | AS TO THE QUALITY OF MATERIALS, WHERE QUALITY IS |
| | ESSENTIAL TO CONFORMITY WITH THE TECHNICAL CODES. SUCH |
| | INFORMATION SHALL BE SPECIFIC, AND THE TECHNICAL CODES |
| | SHALL NOT BE CITED AS A WHOLE OR IN PART, NOR SHALL THE |
| | TERM "LEGAL" OR ITS EQUIVALENT BE USED AS A SUBSTITUTE |
| | FOR SPECIFIC INFORMATION. ALL INFORMATION, DRAWINGS, |
| | SPECIFICATIONS AND ACCOMPANYING DATA SHALL BEAR THE |
| | NAME AND SIGNATURE OF THE PERSON RESPONSIBLE FOR THE |
| | DESIGN. (SEE ALSO SECTION 107.3.5). |
| | |
| | NO PLAN SUBMITTED. |
| | |
| | 2. PLEASE DO NOT SUBMIT DOCUMENTS NOT REQUIRED TO SHOW |
| | CODE COMPLIANCE. FOR INSTANCE, THE DOCUMENT REGARDING |
| | LEAD BASED PAINT. |
| | |
| | 3. PROVIDE A STRUCTURAL DETAILS FOR GABLE REPAIR (SEE |
| | FBC R 703.6.3 REGARDING BOND BREAK). GABLE BRACING, |
| | SHOW SOFFIT VENTILATION. |
| | |
| | 4. PROVIDE FLORIDA STATE OR LOCAL PRODUCT APPROVAL FOR |
| | THE DOORS AND WINDOWS, FAC9N-3. |
| | |
| | 5. PROVIDE FLORIDA STATE OR LOCAL PRODUCT APPOVAL FOR |
| | THE SINGLES AND THE FLAT DECK. PROVIDE ROOF HEIGHT AND |
| | SLOPE. FOR THE ROOF, INDICATE WHICH APPROVED ASSEMBLY |
| | IS PROPOSED AND PROVIDE ENGINEERING IF REQUIRED OR |
| | OTHERWISE SPECIFY ENHANCED FASTENING, SEE LIMITATIONS |
| | ON THE PRODUCT APPROVAL. A SEPARATE ROOF SUB PERMIT IS |
| | REQUIRED. |
| | |
| | 6. PROVIDE A FLOOR PLAN SHOWING: WINDOW LOCATIONS, |
| | SIZES, WINDOW TYPE, ROOM DESIGNATIONS. NOTE EXISTING |
| | CONDITIONS (TYPE OF WINDOW) AND OPENING SIZE FOR |
| | BEDROOMS, FBC R310, FBC EB 604.1. THE CLEAR OPENING |
| | CANNOT BE REDUCED BY MORE THAN 5%. INCLUDE DOOR |
| | LOCATIONS FOR DOORS TO BE REPLACED AS WELL AS DOOR |
| | SIZE. |
| | |
| | 7. PROVIDE A STRUCTURAL PLAN FOR THE NEW ADDITION. NOT |
| | ENOUGH INFORMATION PROVIDE TO SHOW CODE COMPLIANCE. |
| | |
| | 8. PROVIDE A SITE PLAN SHOWING PROPOSED ADDITION |
| | INCLUDING DISTANCE TO PROPERTY LINES, FBC R 302. |
| | |
| | |
| | |
