| Date |
Text |
| 2012-12-20 11:31:01 | SEE PERMIT # 12020431. REVIEW COMMENTS FOR THIS |
| | REVISION WERE ENTERED UNDER THE ORIGINAL PERMIT # |
| | 12020431 FOR CONTINUITY. THE SAME COMMENTS ARE SHOWN |
| | BELOW: |
| | |
| | BUILDING PLAN REVIEW |
| | *******DENIED******* |
| | ROBERT BROWN (561) 805 6652 |
| | E-MAIL: [email protected] |
| | |
| | FBC = FLORIDA BUILDING CODE 2007 |
| | FBC*= FLORIDA BUILD'G CODE (CITY AMEND) |
| | F.S.= FLORIDA (STATE) STATUTE |
| | |
| | THIS IS AN ISSUED PERMIT, SO THE ADDITIONAL INFORMATION |
| | WAS CORRECTLY SUBMITTED AS A REVISION UNDER A SEPARATE |
| | REVISION TRACKING NUMBER (12120221). THE REVIEW IS |
| | BEING PERFORMED HERE UNDER THE ORIGINAL PERMIT NUMBER |
| | FOR CONTINUITY OF COMMENTS RELATED TO THE TRANSOM GLASS |
| | PANEL: |
| | |
| | THE PRINCIPLE OF THE SUBMITTED RATIONAL ANALYSIS IS |
| | ACCEPTABLE, HOWEVER IT IS SIGNED AND SEALED BY THOMAS |
| | J. TWOMEY, P.E., WHEREAS THE STRUCTURAL ENGINEER OF |
| | RECORD FOR THE OTHER DOCUMENTS PREVIOUSLY SUBMITTED FOR |
| | THIS PROJECT IS WARREN J. VON WERNE, P.E. |
| | |
| | THERE CAN BE JUST ONE STRUCTURAL ENGINEER OF RECORD FOR |
| | A PROJECT. TO RESOLVE THIS, EITHER THOMAS TWOMEY CAN |
| | ASSUME RESPONSIBILITY, AS SUCCESSOR ENGINEER, FOR |
| | WARREN J. VON WERNE' S WORK, OR WARREN J. VON WERNE CAN |
| | SUBMIT A LETTER STATING THAT HE IS THE ENGINEER OF |
| | RECORD AND HE HAS REVIEWED AND ACCEPTED THE WORK OF |
| | THOMAS TWOMEY AS SPECIALTY ENGINEER FOR THE TRANSOM |
| | GLASS PANEL. THE FOLLOWING EXTRACTS FROM THE FLORIDA |
| | ADMINSTRATIVE CODE GIVE THE RELEVANT PROCEDURE FOR EACH |
| | OF THE TWO OPTIONS: |
| | |
| | SUCCESSOR ENGINEER: |
| | 61G15-27.001 PROCEDURES FOR A SUCCESSOR PROFESSIONAL |
| | ENGINEER ADOPTING AS HIS OWN THE WORK OF ANOTHER |
| | ENGINEER. |
| | (1) A SUCCESSOR PROFESSIONAL ENGINEER SEEKING TO REUSE |
| | ALREADY SEALED CONTRACT DOCUMENTS UNDER THE SUCCESSOR |
| | PROFESSIONAL ENGINEER'S SEAL MUST BE ABLE TO DOCUMENT |
| | AND PRODUCE UPON REQUEST EVIDENCE THAT HE HAS IN FACT |
| | RECREATED ALL THE WORK DONE BY THE ORIGINAL |
| | PROFESSIONAL ENGINEER. IN OTHER WORDS, CALCULATIONS, |
| | SITE VISITS, RESEARCH AND THE LIKE MUST BE DOCUMENTED |
| | AND PRODUCEABLE UPON DEMAND. FURTHER, THE SUCCESSOR |
| | PROFESSIONAL ENGINEER MUST TAKE ALL PROFESSIONAL AND |
| | LEGAL RESPONSIBILITY FOR THE DOCUMENTS WHICH HE SEALED |
| | AND SIGNED AND CAN IN NO WAY EXEMPT HIMSELF FROM SUCH |
| | FULL RESPONSIBILITY. PLANS NEED NOT BE REDRAWN BY THE |
| | SUCCESSOR PROFESSIONAL ENGINEER; HOWEVER, JUSTIFICATION |
| | FOR SUCH ACTION MUST BE AVAILABLE THROUGH WELL KEPT AND |
| | COMPLETE DOCUMENTATION ON THE PART OF THE SUCCESSOR |
| | PROFESSIONAL ENGINEER AS TO HIS HAVING RETHOUGHT AND |
| | REWORKED THE ENTIRE DESIGN PROCESS. A SUCCESSOR |
| | PROFESSIONAL ENGINEER MUST USE HIS OWN TITLE BLOCK, |
| | SEAL AND SIGNATURE AND MUST REMOVE THE TITLE BLOCK, |
| | SEAL AND SIGNATURE OF THE ORIGINAL PROFESSIONAL |
| | ENGINEER BEFORE REUSING ANY SEALED CONTRACT DOCUMENTS. |
| | (2) PRIOR TO SEALING AND SIGNING WORK A SUCCESSOR |
| | PROFESSIONAL ENGINEER SHALL BE REQUIRED TO NOTIFY THE |
| | ORIGINAL PROFESSIONAL ENGINEER, HIS SUCCESSORS, OR |
| | ASSIGNS BY CERTIFIED LETTER TO THE LAST KNOWN ADDRESS |
| | OF THE ORIGINAL PROFESSIONAL ENGINEER OF THE |
| | SUCCESSOR'S INTENTION TO USE OR REUSE THE ORIGINAL |
| | PROFESSIONAL ENGINEER'S WORK. THE SUCCESSOR |
| | PROFESSIONAL ENGINEER WILL TAKE FULL RESPONSIBILITY FOR |
| | THE DRAWING AS THOUGH THEY WERE THE SUCCESSOR |
| | PROFESSIONAL ENGINEER'S ORIGINAL PRODUCT. |
| | SPECIFIC AUTHORITY 471.033(2) FS. LAW IMPLEMENTED |
| | 471.033(1)(J), 471.005(6) FS. HISTORY?NEW 8-25-87, |
| | AMENDED 4-21-88, 8-3-88, FORMERLY 21H-27.001 |
| | |
| | SPECIALTY ENGINEER: |
| | 61G15-31.002 DEFINITIONS. |
| | (1) ENGINEER OF RECORD. THE FLORIDA LICENSED |
| | PROFESSIONAL ENGINEER WHO DEVELOPS THE OVERALL |
| | STRUCTURAL DESIGN AND THE STRUCTURAL DESIGN CRITERIA |
| | FOR THE STRUCTURE, AND IS RESPONSIBLE FOR THE |
| | PREPARATION OF THE STRUCTURAL ENGINEERING DOCUMENTS. |
| | (2) STRUCTURAL COMPONENT. AN INDIVIDUAL STRUCTURAL |
| | MEMBER OR ELEMENT DESIGNED TO BE PART OF THE STRUCTURE |
| | OR STRUCTURAL SYSTEM. THIS DEFINITION OF COMPONENT |
| | SHOULD NOT BE CONFUSED WITH ANY OTHER PUBLISHED |
| | DEFINITIONS. |
| | (3) STRUCTURE. THE ENTITY TO BE BUILT. |
| | (4) STRUCTURAL SYSTEM. A PORTION OF A STRUCTURE |
| | COMPRISING AN ASSEMBLY OF STRUCTURAL COMPONENTS WHICH |
| | CARRY AND TRANSMIT LOADS. |
| | (5) STRUCTURAL ENGINEERING DOCUMENTS. THE STRUCTURAL |
| | DRAWINGS, SPECIFICATIONS AND OTHER DOCUMENTS SETTING |
| | FORTH THE OVERALL DESIGN AND REQUIREMENTS FOR THE |
| | CONSTRUCTION, ALTERATION, REPAIR, REMOVAL, DEMOLITION, |
| | ARRANGEMENT AND/OR USE OF THE STRUCTURE, PREPARED BY |
| | AND SIGNED AND SEALED BY THE ENGINEER OF RECORD FOR THE |
| | STRUCTURE. STRUCTURAL ENGINEERING DOCUMENTS SHALL |
| | IDENTIFY THE PROJECT AND SPECIFY DESIGN CRITERIA BOTH |
| | FOR THE OVERALL STRUCTURE AND FOR STRUCTURAL COMPONENTS |
| | AND STRUCTURAL SYSTEMS. THE DRAWINGS SHALL IDENTIFY THE |
| | NATURE, MAGNITUDE AND LOCATION OF ALL DESIGN LOADS TO |
| | BE IMPOSED ON THE STRUCTURE. THE STRUCTURAL ENGINEERING |
| | DOCUMENTS SHALL PROVIDE CONSTRUCTION REQUIREMENTS TO |
| | INDICATE THE NATURE AND CHARACTER OF THE WORK AND TO |
| | DESCRIBE, DETAIL, LABEL AND DEFINE THE STRUCTURE'S |
| | COMPONENTS, SYSTEMS, MATERIALS, ASSEMBLIES, AND |
| | EQUIPMENT. |
| | (6) STRUCTURAL SUBMITTALS. SUBMITTALS REQUIRED BY THE |
| | STRUCTURAL ENGINEERING DOCUMENTS WHICH DO NOT REQUIRE |
| | THE SEAL OF A PROFESSIONAL ENGINEER, SUCH AS: |
| | (A) DRAWINGS PREPARED SOLELY TO SERVE AS A GUIDE FOR |
| | FABRICATION AND INSTALLATION AND REQUIRING NO |
| | ENGINEERING INPUT SUCH AS REINFORCING STEEL SHOP |
| | DRAWINGS, AND STRUCTURAL STEEL, STEEL JOIST AND JOIST |
| | GIRDER ERECTION DRAWINGS. |
| | (B) CATALOG INFORMATION ON STANDARD PRODUCTS NOT |
| | FABRICATED FOR A SPECIFIC PROJECT. |
| | (7) STRUCTURAL DELEGATED ENGINEERING DOCUMENTS. |
| | DOCUMENTS PREPARED BY A DELEGATED ENGINEER TO WHOM THE |
| | ENGINEER OF RECORD FOR THE STRUCTURE HAS DELEGATED |
| | RESPONSIBILITY FOR THE DESIGN OF A STRUCTURAL COMPONENT |
| | OR SYSTEM. |
| | (8) SPECIALTY ENGINEER. A LICENSED PROFESSIONAL |
| | ENGINEER, WHO IS NOT THE STRUCTURAL ENGINEER OF RECORD, |
| | WHO PROVIDES ENGINEERING CRITERIA OR DESIGNS NECESSARY |
| | FOR THE STRUCTURE TO BE COMPLETED. THE SPECIALTY |
| | ENGINEER MAY BE A DELEGATED ENGINEER. |
| | RULEMAKING AUTHORITY 471.033(2), 471.008 FS. LAW |
| | IMPLEMENTED 471.033(1)(G), (J) FS. HISTORY?NEW 1-26-93, |
| | FORMERLY 21H-31.002, AMENDED 10-19-97, 9-28-10. |
| | |
| | |
| | **QUOTE PERMIT# ON ALL CORRESPONDENCE** |
| | |
| | END OF REVIEW COMMENTS |
| | THE CODE REFERENCES GIVE ADDITIONAL INFO |
| | TELEPHONE: (561) 805 6652 ROBERT BROWN |
| | E-MAIL: [email protected] |
