| Date |
Text |
| 2012-06-15 12:07:05 | PLANNING: ***** FAILED ***** |
| | |
| | 1. RESPOND TO COMMENTS IN WRITING. |
| | |
| | 2. PROVIDE DIMENSION AND SQUARE FOOTAGE OF THE BUILDING |
| | FACADE WHERE THE SIGN IS PROPOSED TO BE INSTALLED. ONLY |
| | INCLUDE THE "LEASABLE AREA" FACADE OF THE BEAUTY SUPPLY |
| | BUSINESS (INCLUDE THE TOTAL HEIGHT AND WIDTH OF THE |
| | FACADE). |
| | |
| | 3. THE PROPERTY IS WITHIN THE BROADWAY MIXED USE |
| | DISTRICT ("BMUD"), BUILDING TYPE II, THEREFORE THE SIGN |
| | STANDARDS ARE AS FOLLOWS: |
| | |
| | ZLDR, SECTION 94-221(E): |
| | |
| | (1) THE SIGN AREA SHALL NOT EXCEED 36 INCHES IN HEIGHT |
| | BY 60 PERCENT OF THE WIDTH OF EACH SIDE OF THE |
| | BUILDING. THIS SIGN AREA SHALL BE LOCATED WITHIN THE |
| | FIRST TWO STORIES OF THE BUILDING. IF THE STOREFRONT |
| | USES, AWNINGS, THE COPY OR LOGO ON THE VALANCE SHALL |
| | NOT EXCEED SIX INCHES IN HEIGHT AND SHALL BE CONSIDERED |
| | AS SQUARE FOOTAGE AGAINST THE ALLOWABLE BUILDING |
| | SIGNAGE. |
| | |
| | (2) A SIGN BAND MAY BE LOCATED ON THE REAR OF A |
| | BUILDING AND FACING A RESIDENTIAL ZONING DISTRICT SHALL |
| | NOT EXCEED ONE AND ONE-HALF (1-1/2) FEET IN VERTICAL |
| | DIMENSION BY 30 PERCENT OF THE WIDTH OF THE FACADE |
| | WIDTH. THE ILLUMINATION OF THE SIGN SHALL BE DIRECTED |
| | ONLY TOWARD THE SIGN FACE. THIS SIGN BAND SHALL BE |
| | LOCATED ON THE FIRST FLOOR ONLY. |
| | |
| | (6) ALL FASTENERS SHALL BE CONCEALED. EXPOSED RACEWAYS, |
| | TRANSFORMERS, BALLASTS AND ELECTRICAL WIRING ARE NOT |
| | ALLOWED. NO SIGNS WITH VISIBLE BACKS ARE PERMITTED. |
| | |
| | (7) ALL INSTALLATION COMPONENTS OR HANGING DEVISES SUCH |
| | AS, BUT NOT LIMITED TO, FASTENERS, CLIPS, BOLTS, ETC. |
| | SHALL BE OF NON-CORROSIVE, STAINLESS STEEL, ALUMINUM, |
| | BRASS OR BRONZE; CARBON BEARING STEEL SHALL BE OF |
| | NON-FERROUS METAL OF QUALITY MATERIAL AND FINISH. ALL |
| | BLACK IRON MATERIALS SHALL BE FINISHED TO WITHSTAND |
| | CORROSION. ALL PENETRATIONS OF THE FASCIA SHALL BE |
| | NEATLY SEALED IN A WATERTIGHT MANNER USING A SINGLE |
| | COMPONENT SILICON SEALANT. ALL SIGNAGE SHALL HAVE AN |
| | INDIVIDUAL CIRCUIT AND BE CONTROLLED BY A TIME CLOCK. |
| | EXPOSED CONDUIT OR ELECTRICAL WIRING IS PROHIBITED. |
| | INTERNALLY ILLUMINATED PANELS ARE PROHIBITED. |
| | |
| | PLEASE PROVIDE ALL INFORMATION OF WHAT IS ALLOWED VS. |
| | PROVIDED FOR THE SIGN SQUARE FOOTAGE ACCORDINGLY. |
| | |
| | IF YOU HAVE ANY QUESTIONS PLEASE CONTACT ME. |
| | |
| | LINDA MIA FRANCO, AICP |
| | SENIOR PLANNER |
| | PLANNING DIVISION |
| | TEL: (561) 822-1443 |
| | EMAIL: [email protected] |
| | |
| 2012-06-01 09:10:35 | GIVEN TO LF |
