| Date |
Text |
| 2012-02-29 13:55:59 | BUILDING PLAN REVIEW |
| | PERMIT: 12020156 |
| | ADD: 2235 OKEECHOBEE BLVD |
| | CONT: TBD |
| | TEL: (561)594-1478 |
| | |
| | 2007 FLORIDA BUILDING CODE W/ 2009 FBC SUPPLEMENTS |
| | * WEST PALM BEACH AMENDMENTS |
| | |
| | 2007 EXISTING BUILDING CODE LEVEL II 701.3 |
| | COMPLIANCE. ALL NEW CONSTRUCTION ELEMENTS, COMPONENTS, |
| | SYSTEMS, AND SPACES SHALL COMPLY WITH THE REQUIREMENTS |
| | OF THE FLORIDA BUILDING CODE, BUILDING. |
| | |
| | 1ST REVIEW |
| | ACTION: DENIED |
| | |
| | 1) SHEET A302 INDICATES THE USE OF ALUMINUM COMPOSITE |
| | PANELS PLEASE REVIEW FBC-B 1407.13 LABELING. MCM SHALL |
| | BE LABELED IN ACCORDANCE WITH SECTION 1703.5. |
| | |
| | 1A)1703.5 LABELING. WHERE MATERIALS OR ASSEMBLIES ARE |
| | REQUIRED BY THIS CODE TO BE LABELED, SUCH MATERIALS AND |
| | ASSEMBLIES SHALL BE LABELED BY AN APPROVED AGENCY IN |
| | ACCORDANCE WITH SECTION 1703. PRODUCTS AND MATERIALS |
| | REQUIRED TO BE LABELED SHALL BE LABELED IN ACCORDANCE |
| | WITH THE PROCEDURES SET FORTH IN SECTIONS 1703.5.1 |
| | THROUGH 1703.5.3. |
| | |
| | 1B) 1703.5.1 TESTING. AN APPROVED AGENCY SHALL TEST A |
| | REPRESENTATIVE SAMPLE OF THE PRODUCT OR MATERIAL BEING |
| | LABELED TO THE RELEVANT STANDARD OR STANDARDS. THE |
| | APPROVED AGENCY SHALL MAINTAIN A RECORD OF THE TESTS |
| | PERFORMED. THE RECORD SHALL PROVIDE SUFFICIENT DETAIL |
| | TO VERIFY COMPLIANCE WITH THE TEST STANDARD. |
| | |
| | 1C) 1703.5.2 INSPECTION AND IDENTIFICATION. THE |
| | APPROVED AGENCY SHALL PERIODICALLY PERFORM AN |
| | INSPECTION, WHICH SHALL BE IN-PLANT IF NECESSARY, OF |
| | THE PRODUCT OR MATERIAL THAT IS TO BE LABELED. THE |
| | INSPECTION SHALL VERIFY THAT THE LABELED PRODUCT OR |
| | MATERIAL IS REPRESENTATIVE OF THE PRODUCT OR MATERIAL |
| | TESTED. |
| | |
| | 1D) 1703.5.3 LABEL INFORMATION. THE LABEL SHALL CONTAIN |
| | THE MANUFACTURER'S OR DISTRIBUTOR'S IDENTIFICATION, |
| | MODEL NUMBER, SERIAL NUMBER OR DEFINITIVE INFORMATION |
| | DESCRIBING THE PRODUCT OR MATERIAL'S PERFORMANCE |
| | CHARACTERISTICS AND APPROVED AGENCY'S IDENTIFICATION. |
| | |
| | 1E) RULE 9N-3 FLORIDA STATE PRODUCT APPROVAL PROGRAM |
| | REQUIRES PRODUCT TESTING REPORTS PER 9N-3(31)(C) |
| | PRODUCTS INTRODUCED AS A RESULT OF NEW TECHNOLOGY. |
| | |
| | 2) 1609.6.2 WIND DESIGN PROCEDURES |
| | 1) THE BASIC WIND SPEED, V, SHALL BE DETERMINED IN |
| | ACCORDANCE WITH SECTION 1609.3. THE WIND SHALL BE |
| | ASSUMED TO COME FROM ANY HORIZONTAL DIRECTION. |
| | |
| | 2) AN IMPORTANCE FACTOR, IW, SHALL BE DETERMINED IN |
| | ACCORDANCE WITH SECTION1609.5. |
| | |
| | 3) AN EXPOSURE CATEGORY SHALL BE DETERMINED IN |
| | ACCORDANCE WITH 1609.4. |
| | |
| | 4) A HEIGHT AND EXPOSURE ADJUSTMENT COEFFICIENT, * |
| | SHALL BE DETERMINED FROM TABLE 1609.6.2.1(4) |
| | |
| | 5) POSITIVE & NEGATIVE PRESSURES/ COMPONENTS & |
| | CLADDING. |
| | |
| | JAMES A. WITMER CBO |
| | SENIOR COMMERCIAL COMBINATION PLANS EXAMINER |
| | TEL: 561-805-6715 |
| | FAX: 561-805-6676 |
| | E-MAIL: [email protected] |
| | |
| | CONSTRUCTION SERVICES HOME PAGE |
| | HTTP://WWW.CITYOFWPB.COM/CONSTRUCTION/INDEX.PHP |
| | |
