| Date |
Text |
| 2011-01-31 11:09:04 | DENIED BY BUILDING |
| | |
| | 1) THE TITLE BLOCK ON THE PLANS INDICATES THAT THERE |
| | ARE 8 SHEETS OF PLANS AND ONLY 7 SHEETS WERE SUBMITTED. |
| | |
| | 2) THE REVISED DRAWINGS INDICATE THAT THE EXISTING |
| | FAMILY ROOM ADDITION WILL BE DEMOLISHED AND A NEW TWO |
| | STORY ADDITION WILL BE CONSTRUCTED IN THE SAME |
| | LOCATION. THE PLANS INDICATE THAT THE ADDITION WILL |
| | MEET THE REQUIRED FLOOD ELEVATION WITH THE FINISH FLOOR |
| | AT OR ABOVE 7 FEET 6 INCHES. PLEASE REVISE THE VALUE OF |
| | THE JOB TO REFLECT THE INCREASE IN THE SCOPE OF WORK. |
| | ALSO, IS THE SCOPE OF WORK TO REMAIN AS A SHELL OR ARE |
| | THE INTERIOR FINISHES INCLUDED? |
| | |
| | 3) THE PLANS WILL BE REQUIRED TO BE REVIEWED BY PALM |
| | BEACH COUNTY TO DETERMINE IF ANY IMPACT FEES ARE DUE. |
| | THIS CAN BE DONE AFTER ALL OF THE OTHER ISSUES HAVE |
| | BEEN ADDRESSED. |
| | |
| | 4) SPECIFY THE SQUARE FOOTAGE OF THE ADDITION ON THE |
| | PLANS. |
| | |
| | 5) THE STRUCTURE IS LOCATED WITHIN 600 FEET OF THE |
| | INTER-COASTAL WATERWAY. FBC R301.2.1.4.3 REQUIRES THE |
| | ROOF SHEATHING UPLIFT AND ROOF TO WALL UPLIFT LOADS TO |
| | BE INCREASED BY 20 PERCENT. SHOW COMPLIANCE. |
| | |
| | 6) PROVIDE A DETAIL OF THE FRAMED OPENINGS IN THE |
| | EXTERIOR LOAD BEARING WALLS. INCLUDE THE HEADER SIZES |
| | AND STRAPPING. FBC R602.2.8 |
| | |
| | 7) SHOW ON THE PLANS THAT THE ALUMINUM GUARDRAIL FOR |
| | THE BALCONY COMPLIES WITH FBC R312.2 FOR OPENING |
| | LIMITATIONS AND R301.5 FOR LIVE LOADS. |
| | |
| | 8) SUBMIT CALCULATIONS FOR THE BALCONY LOADING AND THE |
| | UPLIFT OF THE STONE ON SETTING BED THAT IS TO BE |
| | INSTALLED. SPECIFY THE SIZE AND THICKNESS OF THE STONE. |
| | PROVIDE SPECIFICATIONS AND DETAILS OF THIS SYSTEM. FBC |
| | R301.1 |
| | |
| | 9) THE DESIGNER OF RECORD FOR THE PROJECT IS REQUIRED |
| | TO REVIEW AND APPROVE THE PRODUCT APPROVALS IN WRITING |
| | PER FBC 106.3.3. |
| | |
| | 10) THE PRODUCT APPROVAL NOAS FOR THE HARDIPANEL SIDING |
| | DETAIL SHEETS 1-3 ARE MISSING THE INFORMATION ON EACH |
| | SIDE OF THE DRAWING. SUBMIT COMPLETE DRAWINGS. |
| | |
| | 11) THE PRODUCT APPROVAL NOAS FOR THE TAMKO ROOF |
| | COVERING HAS BEEN SUPERSEDED BY NOA # 09-0820.11. |
| | SUBMIT THE CURRENT NOA. SPECIFY WHICH ONE OF THE |
| | APPROVED ASSEMBLIES AND FASTENING OPTION FROM THE NOA |
| | WILL BE USED. SUBMIT 2 COPIES OF ENHANCED FASTENING |
| | CALCULATIONS FOR THE SYSTEM THAT WILL BE USED TO MEET |
| | THE INCREASED UPLIFT REQUIREMENTS PERIMETER AND CORNER |
| | ROOF AREAS. |
| | |
| | 12) PLEASE PROVIDE WRITTEN RESPONSES TO COMMENTS. |
| | |
| | ROBERT MCDOUGAL |
| | BLDG. PLAN REVIEW |
| | (561)805-6714 |
| | [email protected] |
