| Plan Review Notes For Permit 10030771 |
| Permit Number |
10030771 |
|
| Review Stop |
P |
| Sequence Number |
1 |
|
| Notes |
| Date |
Text |
| 2010-04-14 09:27:32 | PROVISO: | | | FLOW CONTROL AND VENT SHALL BE INSTALLED PER | | | MANUFACTURERS INSTRUCTIONS. | | | | | | 1.GREASE INTERCEPTORS MUST HAVE A VENTED WASTE, SIZED | | | IN | | | ACCORDANCE WITH CODE REQUIREMENTS FOR VENTING TRAPS, | | | TO RETAIN A WATER SEAL AND TO PREVENT SIPHONING. | | | | | | 2. THE FLOW CONTROL DEVICE SHOULD BE INSTALLED IN | | | THE WASTE LINE UPSTREAM OF THE GREASE INTERCEPTOR. IT | | | SHOULD BE | | | PLACED BEYOND THE LAST CONNECTION FROM THE FIXTURE(S) | | | AND AS | | | CLOSE AS POSSIBLE TO THE UNDERSIDE OF THE LOWEST | | | FIXTURE. | | | | | | REVIEW BY LARRY WAGNER | | | CHIEF PLUMBING INSPECTOR | | | (561) 805-6692 | | | FAX (561) 653-2692 | | | E-MAIL [email protected] | | | | | | |
|
