| Date |
Text |
| 2010-04-21 08:51:09 | ****CORRECTIONS**** |
| | SAMANTHA HILL, BUILDING PLANS EXAMINER |
| | 561-805-6724 [email protected] |
| | FBC FLORIDA BUILDING CODE 2007 |
| | FBC R FLORIDA BUILDING CODE 2007 RESIDENTIAL |
| | |
| | 1. PLANS ARE TO BE ARCHITECTURAL QUALITY, TO SCALE, |
| | FBC106. PLANS SUBMITTED DO NOT INCLUDE ENOUGH |
| | INFORMATION TO DETERMINE CODE COMPLIANCE. IT IS UNCLEAR |
| | HOW THIS STRUCTURE HAS BEEN DESIGNED TO COMPLY WITH |
| | REQUIRED LOADS FBCR301.1, SEE FBC R301.2.1.1. |
| | |
| | FOR INSTANCE: PLAN STATES "8" DIA CONC PAD", NO |
| | REINFORCEMENT, NO ANCHORS TO TIE THE FOUNDATION TO THE |
| | STRUCTURE. |
| | FOUNDATION PLAN SHOWS "CONC PAD INTO GROUND" WITH NO |
| | REINFORCEMENT, NO SIZE.\ |
| | HOW HAS IT BEEN DETERMINED THAT THE ROUND FOOTINGS WILL |
| | BE ADEQUATE TO SUPPORT AND HOLD DOWN THIS STRUCTURE? |
| | THE WALL SECTION DOES NOT INCLUDE ALL CONNECTORS TO |
| | SHOW HOW PROPOSED CONSTRUCTION WILL BE STRUCTURALLY |
| | CONTINUOUS. |
| | PLANS STATE THERE WILL BE "HAND FRAMED WOOD TRUSSES," |
| | HOW WILL THIS BE ACCOMPLISHED? NO DETAILS PROVIDED. |
| | STUCCO INSTALLATION DOES NOT COMPLY WITH FBC R703.6.3, |
| | BOND BREAK. NO MINIMUM STUCCO THICKNESS SPECIFIED. |
| | STATE WIND DESIGN CRITERIA ON THE PLAN - DESIGN MUST |
| | COMPLY WITH 140MPH EXPOSURE C. |
| | WALL FRAMING DETAIL FOR OPENING (DOOR) |
| | |
| | PLEASE BE ADVISED THAT CONSTRUCTION METHODS WHICH DO |
| | NOT COMPLY WITH A PRESCRIPTIVE DESIGN METHOD MAY |
| | REQUIRE CALCULATIONS. |
| | |
| | 2. CONTRACTOR HAS REQUESTED AN ELECTRIC PERMIT (SEE |
| | APPLICATION, SIGNED ON "ELECTRICAL CONTRACTOR" LINE). |
| | NO ELECTRIC WORK SHOWN. |
| | |
| | 3. PLAN STATES "HAND FRAME" FOR THE DOOR, NO DETAILS |
| | PROVIDED. CONTRACTOR WILL BE REQUIRED TO DEMONSTRATE |
| | THAT THE DOOR MEETS THE WIND REQUIREMENTS, BUT THERE IS |
| | NO PRESCRIPTIVE CODE FOR DOOR CONSTRUCTION. THIS IS |
| | USUALLY DONE THROUGH A PRODUCT APPROVAL. |
| | |
| | 4. ROOF PERMIT REQUIRED. |
| | |
| | 5. SITE PLAN IS TO INCLUDE PROPOSED DIMENSIONS TO |
| | PROPERTY LINES AND STRUCTURE. |
| | |
| | |
| | |
