| Date |
Text |
| 2008-09-02 16:04:58 | ****CORRECTIONS**** |
| | |
| | ROBERT MCDOUGAL, BUILDING PLANS EXAMINER |
| | 561-805-6714 [email protected] |
| | |
| | 2004 FLORIDA BUILDING CODE & |
| | CITY OF WEST PALM BEACH AMENDMENTS TO THE 2004 FBC |
| | |
| | 1) A RECORDED COPY OF THE NOTICE OF COMMENCEMENT WILL |
| | BE REQUIRED. |
| | |
| | 2) ROOFING PERMIT; ONLY CHECKED ITEMS APPLY |
| | |
| | ____ 1.) EFFECTIVE OCTOBER 1, 2007, SECONDARY WATER |
| | BARRIER REQUIRED FS553.844(5)(A). PROVIDE INFORMATION |
| | (PRODUCT APPROVAL OR SPECIFICATIONS) TO SHOW HOW YOU |
| | WILL COMPLY WITH THIS REQUIREMENT. INFORMATION IS |
| | AVAILABLE AT WWW.BOAF.NET, HURRICANE MITIGATION. |
| | |
| | __X__ 2.) CONTRACTOR IS TO PROVIDE THE FOLLOWING |
| | INFORMATION ON THE APPLICATION, SEE ATTACHED POLICY; |
| | AREA OF EACH ROOF TYPE |
| | |
| | ____ 3.) FLORIDA STATE OR LOCAL PRODUCT APPROVAL |
| | REQUIRED IN ADDITION TO THE EVALUATION REPORT |
| | SUBMITTED, FAC9B72. WWW.FLORIDABUILDING.ORG |
| | |
| | _____ 4.) FOR THE FLAT ROOF, SELECT THE APPROVED |
| | ASSEMBLY YOU ARE USING. ALSO INDICATE WHICH FASTENER |
| | YOU ARE USING IF THE OPTIONS HAVE DIFFERENT PRESSURE |
| | LIMITATIONS. |
| | |
| | _____ 5.) FOR THE FLAT ROOF, SPECIFY THE ENHANCED |
| | FASTENING FOR CORNER AND PERIMETER ZONES. THIS IS TO BE |
| | EITHER WRITTEN ON THE PRODUCT APPROVAL OR SUBMITTED ON |
| | LETTERHEAD, TWO SETS (NOT WRITTEN ON THE RESUB SHEET). |
| | |
| | _____ 6.) ON THE TILE PRODUCT APPROVAL, INDICATE WHICH |
| | METHOD OF ATTACHMENT YOU ARE USING. IF YOU SELECT FOAM |
| | ADHESIVE, PRODUCT APPROVALS REQUIRED FAC9B72. |
| | |
| | __X__ 7.) SEE PRODUCT LIMITATION #7. SUBMIT 2 COPIES OF |
| | RAS 117 CALCULATIONS PREPARED BY AN ARCHITECT, |
| | ENGINEER, OR REGISTERED ROOF CONSULTANT FOR ENHANCED |
| | FASTENING. |
| | |
| | |
| | PROVISO * MECHANICAL EQUIPMENT TO COMPLY WITH FBC |
| | EB511, FBC1509.7. |
| | DOUBLE UNDERLAYMENT 1507.2.8 |
| | |
