| Date |
Text |
| 2008-09-22 10:09:10 | DENIED |
| | REFERENCE: FBC-2004 FUEL GAS |
| | |
| | ****FROM PREVIOUS REVIEW: |
| | |
| | 1. SHT P6.1 A SEPARATE GAS PERMIT IS REQUIRED. THE |
| | REQUIREMENTS FOR PERMIT FOLLOW: |
| | |
| | A. OK |
| | B. OK |
| | C. OK |
| | D. OK |
| | E. OK |
| | F. OK |
| | |
| | G. SUBMIT A DETAIL SHOWING THE TYPE, |
| | LOCATION, SIZE AND TERMINATION OF THE |
| | GAS VENTS PER FBC-2004 FUEL GAS CODE |
| | SECS. 502 THRU 505. |
| | ****RESPONSE NOTED, BUT COMMENT NOT ADDRESSED FOR THE |
| | IWH'S. |
| | |
| | H. SUBMIT MANUFACTURE SHEETS FOR ALL GAS |
| | EQUIPMENT TO VERIFY COMPLIANCE WITH |
| | STANDARDS NFPA 54, NFPA 58, AND THE |
| | FBC-2004 FUEL GAS CODE SEC 402.2. |
| | ****RESPONSE NOTED, COMMENT NOT ADDRESSED. |
| | |
| | I. N/A |
| | J. N/A |
| | K. OK |
| | |
| | L. INDICATE THE PIPE SIZE FOR EACH APPLIANCE STUB-OUT |
| | FROM THE BRANCH LINE. SHUT OFF VALVE SHALL BE THE SAME |
| | SIZE AS THE STUB-OUT FOR THE APPLIANCE. SECTION 402. |
| | ****RESPONSE NOTED, BUT PIPE SIZE AND VALVE TO EACH |
| | APPLIANCE SHALL BE FULL SIZE. SEE TABLE 402.4(6). |
| | |
| | M. OK |
| | |
| | ***********NEW COMMENT*********** |
| | |
| | 1B. INDICATE IF THE GAS PIPING WILL BE WELDED OR SCREW |
| | PIPE ON THE PLANS. IF WELDED THEN THE WELDING PROCEDURE |
| | AND WELDING CERTIFICATIONS & PICTURE I.D. OF THE PERSON |
| | WELDING THE PIPE ARE REQUIRED AT THE TIME OF GAS PERMIT |
| | APPLICATION. |
| | |
| | WHEN RESUBMITTING PLANS PLEASE INDICATE |
| | THE REVISION & REMOVE & REPLACE ANY |
| | PAGES AS NECESSARY. A TRANSMITTAL LETTER |
| | LISTING THE ORIGINAL REVIEW COMMENT NUMBER, |
| | WITH A DESCRIPTION OF THE REVISION MADE, IDENTIFYING |
| | THE SHEET OR SPECIFICATION |
| | PAGE WHERE THE CHANGES CAN BE FOUND |
| | WILL HELP TO EXPEDITE YOUR PERMIT. REMOVE |
| | ALL VOID SHEETS FROM ALL PLANS AND PLACE |
| | ONE SET OF THEM LOOSELY ON TOP OF THE |
| | COLLATED PLANS TO BE REVIEWED. |
| | THANK YOU FOR YOUR ANTICIPATED COOPERATION. |
| | |
| | REVIEW BY KEN STEVENS |
| | (561) 805-6721 |
| | FAX (561) 805-6731 |
| | E-MAIL [email protected] |
