| Date |
Text |
| 2008-07-07 16:39:40 | GAS PLAN REVIEW: |
| | DENIED: |
| | |
| | PLAN REVIEW UNDER THE 2004 FLORIDA BUILDING CODES WITH |
| | 2007 REVISIONS, CITY OF WEST PALM BEACH AMENDMENTS TO |
| | CHAPTER 1 (W.P.B.), FLORIDA ADMINISTRATIVE CODE |
| | (F.A.C.), AND FLORIDA STATUTES (F.S.). |
| | |
| | 1. SHEETS E-1, E-3, AND E-6 ARE INDICATING AN 85KW |
| | NATURAL GAS EMERGENCY GENERATOR, HOWEVER THERE IS NO |
| | ISOMETRIC NATURAL GAS RISER DIAGRAM SUBMITTED OR GAS |
| | PERMIT APPLICATION THAT HAS BEEN APPLIED FOR. |
| | |
| | CONTRACTOR INFORMATION |
| | NOTE: GAS PERMIT REQUIRED. LICENSED GAS OR PLUMBING |
| | CONTRACTOR TO SUBMIT PLANS WITH PERMIT APPLICATION. ALL |
| | GAS INSPECTIONS TO BE COMPLETE BEFORE FINAL GEN/COM |
| | INSPECTION. |
| | |
| | ******IMPORTANT INFORMATION****** |
| | AS OF 8/25/06 GENERATOR (GEN/RES AND |
| | GEN/COM) PERMIT APPLICATIONS SHALL NOT |
| | BE ACCEPTED UNLESS THE ELECTRICAL INFOR- |
| | MATION AND GAS (OR DIESEL) INFORMATION |
| | IS ALL SUBMITTED AT THE SAME TIME. THE |
| | GENERATOR, ELECTRICAL AND GAS/DIESEL IN- |
| | FORMATION WILL BE ROUTED TOGETHER. THIS |
| | WILL ENSURE THAT ALL OF THE INFORMATION (PARTICULARLY |
| | THE MANUFACTURER'S SPECI- |
| | FICATIONS AND INSTALLATION INSTRUCTIONS) |
| | ARE AVAILABLE TO ALL PLAN REVIEWERS. |
| | |
| | NOTE: THE FOLLOWING INFORMATION IS REQUIRED ON THE |
| | NATURAL GAS ISOMETRIC RISER DIAGRAM PER THE CITY OF |
| | WEST PALM BEACH GAS PERMIT APPLICATION REQUIREMENTS: |
| | |
| | 2. SUBMIT AN ISOMETRIC DRAWING THAT CLEARLY SHOWS ALL |
| | CUT SECTIONS OF PIPE AND CORRESPONDING LENGTHS. PER |
| | FBC-2004 FUEL GAS CODE SECTION 401.1 SCOPE. |
| | |
| | 3. CLEARLY SHOW THE TYPE OF PIPING MATERIAL BEING |
| | INSTALLED, ALL PIPE SIZES, (AND THE EDH NUMBER OF |
| | CORRUGATED STAINLESS STEEL TUBING FOR EACH PIPE SIZE |
| | BEING USED. PER FBC-2004 FUEL GAS CODE SECTION 401.1 |
| | SCOPE. |
| | |
| | 4. CLEARLY INDICATE THE TYPE OF GAS, (LP OR NATURAL). |
| | PER FBC-2004 FUEL GAS CODE SECTION 401.1 SCOPE. |
| | |
| | 5. INDICATE THE BTU LOAD OF EACH APPLIANCE AND THE |
| | TOTAL BTU LOAD ON THE SYSTEM. REFER TO THE FBC-2004 |
| | FUEL GAS CODE SECTIONS 401.8 THRU 402.6.1 AND TABLES |
| | 402.4(1) THRU 402.4(33). |
| | |
| | 6. SHOW THE DISTANCE FROM THE POINT OF |
| | DELIVERY, (METER), TO THE MOST REMOTE |
| | OUTLET IN THE BUILDING AND/OR SYSTEM PER |
| | FBC-2004 FUEL GAS CODE APPENDIX A - USE |
| | OF CAPACITY TABLES A.3.1(4). |
| | |
| | 7. INDICATE THE DELIVERY PRESSURE (PSI) |
| | PER FBC-2004 FUEL GAS CODE SECTION 402.2. |
| | NATURAL GAS SPECIFY .5 PSI OR 2 PSI. |
| | |
| | 8. SUBMIT A DETAIL SHOWING THE TYPE, |
| | LOCATION, SIZE AND TERMINATION OF THE |
| | GAS VENTS PER FBC-2004 FUEL GAS CODE |
| | SECS. 502 THRU 505. |
| | |
| | 9. SUBMIT MANUFACTURE SHEETS FOR ALL GAS EQUIPMENT TO |
| | VERIFY COMPLIANCE WITH STANDARDS NFPA 54, NFPA 58, AND |
| | THE FBC-2004 FUEL GAS CODE SECTION 402.2. |
| | NOTE: IF THE NATURAL GAS SYSTEM DELIVERY PRESSURE IS 2 |
| | PSI PLEASE SUBMIT TWO COPIES OF MANUFACTURE SHEETS FOR |
| | THE MP REGULATOR CLEARLY INDICATING ITS MAKE, MODEL |
| | NUMBER, BTU LOAD CAPACITY, AND A LISTING FROM A |
| | NATIONALLY RECOGNIZED TESTING LABORATORY. |
| | |
| | 10. NOTE: ALL PLANS (NATURAL GAS ISOMETRIC RISER |
| | DIAGRAM), SPECIFICATIONS, AND ACCOMPANYING DATA BEING |
| | FILED FOR PUBLIC RECORD SHALL CONTAIN THE PRINTED NAME |
| | OF THE RESPONSIBLE PERSON WITH THE ORIGINAL SIGNATURE |
| | AND DATE ON SUCH INFORMATION. PER SECTION *106.3.4.3. |
| | IF THE DESIGN PROFESSIONAL IS AN ARCHITECT OR |
| | ENGINEER, THEN HE OR SHE SHALL AFFIX HIS OR HER |
| | OFFICIAL SEAL, SIGNATURE AND DATE TO SAID DRAWINGS, PER |
| | FLORIDA STATUTES 481 AND 471 RESPECTIVELY. |
| | |
| | ********IMPORTANT INFORMATION******** |
| | WHEN RESUBMITTING PLANS, PLEASE PROVIDE A COPY OF THE |
| | OLD PLANS, CLEARLY INDICATE THE REVISION ON THE NEW |
| | PLANS, REMOVE AND REPLACE ANY PAGES AS NECESSARY. A |
| | TRANSMITTAL LETTER LISTING THE ORIGINAL REVIEW COMMENT |
| | NUMBER, WITH A DESCRIPTION OF THE REVISION MADE, |
| | IDENTIFYING THE SHEET OR SPECIFICATION PAGE WHERE |
| | CHANGES CAN BE FOUND WILL HELP TO EXPEDITE YOUR PERMIT. |
| | THANK YOU FOR YOUR ANTICIPATED COOPERATION. |
| | |
| | END OF COMMENTS: |
| | |
| | REVIEW BY: MIKE PERSON |
| | PLUMBING PLANS EXAMINER |
| | PHONE= (561) 805-6730 |
| | FAX= (561) 805-6731 |
| | E-MAIL= [email protected] |
