| Date |
Text |
| 2007-10-24 18:45:53 | 2004 FBC W/2007 REVISIONS |
| | ENCLOSE PATIO AND ADD PORCH |
| | |
| | DENIED BY BUILDING |
| | |
| | 1) A RECORDED COPY OF THE NOTICE OF |
| | COMMENCEMENT WILL BE REQUIRED. |
| | |
| | 2) SUBMIT PLANS FOR THE FRONT PORCH ADDITION AND THE |
| | PATIO ENCLOSURE. THE PLANS SHALL INCLUDE EXTERIOR |
| | ELEVATIONS, FOUNDATION PLANS, STRUCTURAL DETAILS, ROOF |
| | FRAMING PLAN, WALL SECTIONS FROM THE FOUNDATION THROUGH |
| | THE ROOF, INCLUDING ASSEMBLY AND MATERIALS, CONNECTOR |
| | TABLES, WIND REQUIREMENTS. FBC 106.3.5 CITY AMENDMENTS |
| | |
| | 3) CONSTRUCTION DOCUMENTS SHALL BE DIMENSIONED AND |
| | DRAWN UPON SUITABLE MATERIAL. CONSTRUCTION DOCUMENTS |
| | SHALL BE OF SUFFICIENT CLARITY TO INDICATE THE |
| | LOCATION, NATURE AND EXTENT OF THE WORK PROPOSED AND |
| | SHOW IN DETAIL THAT IT WILL CONFORM TO THE PROVISIONS |
| | OF THIS CODE AND RELEVANT LAWS, ORDINANCES, RULES AND |
| | REGULATIONS, AS DETERMINED BY THE BUILDING OFFICIAL. |
| | FBC 106.1 CITY AMENDMENTS |
| | |
| | 4) FOR ROOF ASSEMBLIES REQUIRED BY THE CODE, THE |
| | CONSTRUCTION DOCUMENTS SHALL ILLUSTRATE, DESCRIBE, AND |
| | DELINEATE THE TYPE OF ROOFING SYSTEM, MATERIALS, |
| | FASTENING REQUIREMENTS, FLASHING REQUIREMENTS AND WIND |
| | RESISTANCE RATING THAT ARE REQUIRED TO BE INSTALLED. |
| | PRODUCT EVALUATION AND INSTALLATION SHALL INDICATE |
| | COMPLIANCE WITH THE WIND CRITERIA REQUIRED FOR THE |
| | SPECIFIC SITE OR A STATEMENT BY AN ARCHITECT OR |
| | ENGINEER FOR THE SPECIFIC SITE MUST BE SUBMITTED WITH |
| | THE CONSTRUCTION DOCUMENTS. FBC 106.1.1.2 CITY |
| | AMENDMENTS |
| | |
| | 5) SUBMIT 2 COPIES OF PRODUCT APPROVALS FOR ROOF |
| | COVERING, TRUSS CONNECTORS AND OTHER ITEMS AS REQUIRED |
| | BY FAC RULE 9B-72. PRODUCT APPROVALS SUBMITTED WITH |
| | PERMIT APPLICATION AFTER OCTOBER 1, 2003 ARE REQUIRED |
| | TO COMPLY WITH THE FLORIDA PRODUCT APPROVAL SYSTEM. FOR |
| | INFORMATION PLEASE SEE THE STATE WEBSITE AT |
| | WWW.FLORIDABUILDING.ORG. PRODUCTS WITH STATEWIDE |
| | APPROVAL ARE REQUIRED TO BE SUBMITTED WITH A COVER |
| | SHEET THAT LISTS THE PRODUCT IDENTITY NUMBER FROM THE |
| | STATE. |
| | |
| | 6) THE PRINTED NAME AND SIGNATURE OF THE PERSON |
| | RESPONSIBLE FOR THE DESIGN IS REQUIRED ON EACH SHEET OF |
| | THE PLANS. FBC 106.1.3 |
| | |
| | - ROBERT MCDOUGAL |
| | BLDG. PLAN REVIEW |
| | (561)805-6714 |
| | [email protected] |
