| Date |
Text |
| 2007-11-10 09:50:45 | |
| | |
| | DENIED |
| | |
| | THE FOLLOWING COMMENTS WERE NOT ADDRESSED ON 1ST |
| | REVIEW |
| | |
| | 2)IN AN EXISTING BUILDING WHERE ALTERATIONS ARE BEING |
| | MADE A DESIGN PROFESSIONAL MUST ELECT THE LEVEL OF |
| | ALTERATION PER 301.5 OF EXISTING BUILDING CODE AND |
| | STATE ALONG WITH THE TYPE OF CONSTRUCTION ON THE |
| | DRAWINGS |
| | *******ALTERATION LEVEL SHALL BE PRESENT ON THE |
| | DRAWINGS******* |
| | |
| | 6)THE CITY OF WEST PALM BEACH REQUIRES THE FLORIDA |
| | STATE PRODUCT APPROVAL COVER |
| | SHEETS WHEN AVAILABLE. THEY CAN BE SEARCHED FOR ON |
| | WWW.FLORIDABUILDING.ORG.WHEN AVAILABLE AND NOT |
| | SUBMITTED APPLICATIONS WILL BE DENIED |
| | *******NOTE THAT SHINGLES AND LINTELS DO NOT HAVE THE |
| | STATE PRODUCT APPROVAL SHEETS ATTACHED****** |
| | |
| | 7)NO PRODUCT APPROVALS WERE SUBMITTED FORCONNECTORS |
| | AND STRAPS.INSTEAD THEY MAY ALL BE LISTED IN THE |
| | SCHEDULE COMPLETE WITH FLORIDA PRODUCT APPROVAL |
| | NUMBERS |
| | *******SCHEDULE DOES NOT CONTAIN FLORIDA PRODUCT |
| | APPROVAL NUMBERS******* |
| | |
| | NEW REVIEW COMMENTS |
| | |
| | 1)NEW DRAWINGS REQUIRE HISTORIC STAMP TO BE ADDED |
| | |
| | 2)BEFORE A PERMIT TO CONSTRUCT, MAY BE ISSUED, IMPACT |
| | FEES MUST BE PAID TO PALM BEACH COUNTY. THE ACTUAL |
| | PERMIT SETS OF PLANS MUST BE STAMPED BY THAT OFFICE, |
| | AND A COPY OF THE PAID RECEIPT ATTACHED TO THE PERMIT |
| | APPLICATION. PLEASE CALL (561) 233-5025 FOR MORE |
| | INFORMATION. THIS STAMP IS TO BE PRESENT EVEN IF FEES |
| | ARE NOT REQUIRED, PLEASE MAKE ALL CORRECTIONS PRIOR TO |
| | COUNTY IMPACT FEE APPROVAL |
| | |
| | 3)PLEASE NOTE THAT WHEN PULLING UP THE FLORIDA STATE |
| | PRODUCT APPROVALS THAT THERE IS A LINK TO THE CORRECT |
| | NOA TO BE USED WITH THAT APPROVAL. THE MIAMI-DADE NOA'S |
| | FOR THE SHINGLES, FIXED WINDOWS AND DOORS ARE OLD AND |
| | HAVE BEEN REVISED. SEE PAGE 2 OF THE STATE COVER SHEET, |
| | FIND THE PRODUCT THAT YOU WILL BE USING AND CLICK ON |
| | THE LINK TO BRING UP THE NOA THAT WAS USED TO CERTIFY |
| | THE STATE APPROVAL |
| | |
| | 4)PROVIDE THE RIDGE BEAM CONNECTOR THAT WILL AT |
| | DOUBLE GIRDER AND RAKE BEAM ALSO THE SADDLES FOR THE |
| | RAFTER ATTACHMENT TO THE RIDGE BEAM, SEE SHEETS #2 AND |
| | #5 |
| | |
| | 5)REVISION FOR RAFTER ATTACHMENT SHOULD BE TWIST |
| | STRAP MTSM 16 THE H 10-2 WAS FOR GIRDER ONLY ? |
| | |
| | 6)PLEASE NOTE THAT THE C25 CASEMENT WINDOWS WILL NOT |
| | MEET THE -47PSF PRESSURE UNLESS THE GLAZING USED IS |
| | TYPE B OR E. PLEASE SPECIFY TYPE OF GLAZING ON WINDOW |
| | SCHEDULE. ***NOTE MIN GLAZING TYPE A WORKS ON ALL OTHER |
| | CASEMENTS*** |
| | |
| | 7)PLEASE NOTE THAT PER 713.13(2) F.S. IF THE |
| | IMPROVEMENT DESCRIBED IN THE NOC HAS NOT COMMENCED |
| | WITHIN 90 DAYS OF RECORDING, THE NOTICE IS VOID AND |
| | WILL NEED TO BE RERECORDED |
| | |
| | BLDG PLAN REVIEW |
| | ADRIAN MORSE |
| | 561-805-6716 |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
