| Date |
Text |
| 2007-12-28 18:37:03 | PROJECT: 1100 NORTH OLIVE AVENUE |
| | |
| | PROJECT DETAIL: CHANGE OF OCCUPANCY/GROUP R-3 TO GROUP |
| | B CLASSIFICATION |
| | |
| | CODE REVIEW: |
| | |
| | 2004 FLORIDA EXISTING BUILDING CODE W/2006 REVISIONS |
| | 2004 FLORIDA BUILDING CODE W/ 2006 REVISIONS |
| | CITY OF WEST PALM BEACH/ FLORIDA BUILDING CODE |
| | ADMINISTRATION AMENDMENTS, CHAPTER 1, 2004 EDITION |
| | |
| | STATUS: FAILED |
| | |
| | COMMENTS: |
| | |
| | 1) 61G1-16.004 TITLE BLOCK. |
| | A TITLE BLOCK MUST APPEAR ON ALL ARCHITECTURAL OR |
| | INTERIOR DESIGN DRAWINGS AND SPECIFICATION |
| | IDENTIFICATION SHEETS. THE TITLE BLOCK |
| | MUST, AT A MINIMUM, CONTAIN THE FOLLOWING INFORMATION: |
| | |
| | |
| | (1) FIRM NAME, ADDRESS, AND TELEPHONE NUMBER. |
| | (2) FIRM LICENSE NUMBER. |
| | (3) NAME OR IDENTIFICATION OF PROJECT. |
| | (4) DATE PREPARED. |
| | (5) A SPACE FOR THE SIGNATURE AND DATED SEAL. |
| | (6) A SPACE FOR THE PRINTED NAME OF THE PERSON SEALING |
| | THE DOCUMENT. |
| | SPECIFIC AUTHORITY 481.2055 FS. LAW IMPLEMENTED |
| | 481.203(6), 481.203(8), 481.2131(1), |
| | 481.219(3),(4),(5), 481.221, |
| | 481.225(1)(E),(G), 481.2251(1)(H) FS. HISTORY? |
| | NEW 9-7-00. |
| | |
| | 2) PLEASE INDICATE THE PROPOSED OCCUPANCY LOAD OF THE |
| | GROUP B CLASSIFICATION. |
| | |
| | 3) PLEASE PROVIDE A LIFE SAFETY PLAN INDICATING TRAVEL |
| | DISTANCES/COMMON PATH OF TRAVEL/EXIT SIGNS ETC: |
| | |
| | FEBC 705.3EXIT SIGNS. |
| | MEANS OF EGRESS FROM THE HIGHEST WORK AREA FLOOR TO THE |
| | FLOOR OF EXIT DISCHARGE SHALL BE PROVIDED WITH EXIT |
| | SIGNS IN ACCORDANCE WITH THE REQUIREMENTS OF THE |
| | FLORIDA BUILDING CODE, BUILDING. |
| | |
| | 4) PLEASE SHOW THE ACCESSIBLE ROUTE/ACCESSIBLE MEANS OF |
| | EGRESS. PLEASE INCLUDE THE ACCESSIBLE PARKING SPACES |
| | DEPICTING DIMENSIONS. THE ACCESSIBLE ROUTE SHALL COMPLY |
| | WITH SECTION 11-4.1 OF THE FLORIDA BUILDING CODE. |
| | |
| | 5) THE TOP LANDINGS AT THE ACCESSIBLE RAMPSHOWN ON |
| | SHEET A-1 DO NOT MEET THE MINIMUM REQUIREMENTSOF |
| | SECTION 11-4.8.4: |
| | |
| | 11-4.8.4 LANDINGS. |
| | |
| | RAMPS SHALL HAVE LEVEL LANDINGS AT BOTTOM AND TOP OF |
| | EACH RAMP AND EACH RAMP RUN. LANDINGS SHALL HAVE THE |
| | FOLLOWING FEATURES: |
| | (1) THE LANDING SHALL BE AT LEAST AS WIDE AS THE RAMP |
| | RUN LEADING TO IT. |
| | (2) ALL LANDINGS ON RAMPS SHALL BE NOT LESS THAN 60 |
| | INCHES (1524 MM) CLEAR, AND THE BOTTOM OF EACH RAMP |
| | SHALL HAVE NOT LESS THAN 72 INCHES (1829 MM) OF |
| | STRAIGHT AND LEVEL CLEARANCE. |
| | (3) IF RAMPS CHANGE DIRECTION AT LANDINGS, THE MINIMUM |
| | LANDING SIZE SHALL BE 60 INCHES BY 60 INCHES (1525 MM |
| | BY 1525 MM). |
| | (4) IF A DOORWAY IS LOCATED AT A LANDING, THEN THE AREA |
| | IN FRONT OF THE DOORWAY SHALL COMPLY WITH SECTION |
| | 11-4.13.6. |
| | |
| | 6) PLEASE SHOW THAT THE RAMP HANDRAILS COMPLY WITH |
| | SECTION 11-4.8.5: |
| | |
| | 11-4.8.5 HANDRAILS. |
| | |
| | IF A RAMP RUN HAS A RISE GREATER THAN 6 INCHES (150 MM) |
| | OR A HORIZONTAL PROJECTION GREATER THAN 72 INCHES (1830 |
| | MM), THEN IT SHALL HAVE HANDRAILS ON BOTH SIDES. |
| | HANDRAILS ARE NOT REQUIRED ON CURB RAMPS OR ADJACENT TO |
| | SEATING IN ASSEMBLY AREAS. HANDRAILS SHALL COMPLY WITH |
| | SECTION 11-4.26 AND SHALL HAVE THE FOLLOWING FEATURES: |
| | (1) HANDRAILS SHALL BE PROVIDED ALONG BOTH SIDES OF |
| | RAMP SEGMENTS. THE INSIDE HANDRAIL ON SWITCHBACK OR |
| | DOGLEG RAMPS SHALL ALWAYS BE CONTINUOUS. (2) HANDRAILS |
| | ON RAMPS WHICH ARE NOT CONTINUOUS SHALL EXTEND NOT LESS |
| | THAN 18 INCHES (457 MM) BEYOND THE SLOPED SEGMENT AT |
| | BOTH THE TOP AND BOTTOM, AND SHALL BE PARALLEL TO THE |
| | FLOOR OR GROUND SURFACE. |
| | (3) THE CLEAR SPACE BETWEEN THE HANDRAIL AND THE WALL |
| | SHALL BE 1? INCHES (38 MM). |
| | (4) GRIPPING SURFACES SHALL BE CONTINUOUS. |
| | (5) TOP OF HANDRAIL GRIPPING SURFACES SHALL BE MOUNTED |
| | BETWEEN 34 INCHES AND 38 INCHES (865 MM AND 965 MM) |
| | ABOVE RAMP SURFACES. |
| | (6) ENDS OF HANDRAILS SHALL BE EITHER ROUNDED OR |
| | RETURNED SMOOTHLY TO FLOOR, WALL, OR POST. |
| | (7) HANDRAILS SHALL NOT ROTATE WITHIN THEIR FITTINGS. |
| | |
| | 7) PLEASE SHOW THAT THE STAIRS AND HANDRAILING MEET THE |
| | REQUIREMENTS OF SECTION 11-4.9 OF THE FLORIDA |
| | ACCESSIBILITY CODE. THE EXISTING STAIRS SHALL MEET THE |
| | MINIMUM REQUIREMENTS OF SECTION |
| | 703.1FEBC: |
| | |
| | 703.1EXISTING SHAFTS AND VERTICAL OPENINGS. EXISTING |
| | STAIRWAYS THAT ARE PART OF THE MEANS OF EGRESS SHALL |
| | COMPLY WITH THE APPROPRIATE SECTIONS OF THE FLORIDA |
| | FIRE PREVENTION CODE. |
| | |
| | 8) PLEASE INDICATE THE ACCESSIBLE BATHROOM. SHOW CLEAR |
| | FLOOR SPACE, HEIGHT AND WALL DIMENSIONS OF LAVATORY AND |
| | WATER CLOSET. ALSO, INDICATE THE CLEAR OPENING DOOR |
| | WIDTH. GRAB BARS SHALL BE SHOWN ANDSHALL MEET THE |
| | MINIMUM REQUIREMENTS OF SECTION 11-4.26. |
| | |
| | 9) THE MEANS OF EGRESS SHALL MEET THE MINIMUM |
| | REQUIREMENTS OF SECTION 605, FLORIDA EXISTING BUILDING |
| | CODE. |
| | |
| | 10) PLEASE INDICATE THE EXISTING INTERIOR WALL AND |
| | CEILING FINISHES AS PER THE FOLLOWING: |
| | |
| | FEBC 812.3.1MINIMUM REQUIREMENTS. |
| | REGARDLESS OF T HE OCCUPANCY GROUP INVOLVED, THE |
| | FOLLOWING REQUIREMENTS SHALL BE MET: |
| | 1. THE CAPACITY OF THE MEANS OF EGRESS SHALL COMPLY |
| | WITH FLORIDA BUILDING CODE, BUILDING. |
| | 2. THE INTERIOR FINISH OF WALLS AND CEILINGS SHALL |
| | COMPLY WITH THE REQUIREMENTS OF THE FLORIDA BUILDING |
| | CODE, BUILDING FOR THE NEW OCCUPANCY GROUP. |
| | 3. COMPLIANCE WITH THE FLORIDA FIRE PREVENTION CODE. |
| | |
| | END OF REVIEW |
| | |
| | PLAN REVIEW: KEN CONRAD |
| | PHONE: 561.805.6666 |
| | E-MAIL: KCONRAD @WPB.ORG |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
