| Date |
Text |
| 2008-01-25 11:04:02 | 2004 FBC W/2007 REVISIONS |
| | |
| | DENIED BY BUILDING |
| | |
| | 1) A RECORDED COPY OF THE NOTICE OF COMMENCEMENT |
| | MUST BE SUBMITTED BEFORE A |
| | PERMIT CAN BE ISSUED. |
| | |
| | 2) IMPACT FEES MUST BE PAID TO PALM |
| | BEACH COUNTY, PLANS STAMPED BY THEM AND |
| | COPY OF RECEIPT SUBMITTED TO CITY OF |
| | WEST PALM BEACH BUILDING DEPARTMENT, |
| | BEFORE A BUILDING PERMIT CAN BE ISSUED. |
| | |
| | 3) THE ENERGY CALCULATION FORMS ARE REQUIRED TO BE |
| | SIGNED BY THE OWNER/AGENT. SEE FBC CHAPTER 13-6. |
| | |
| | 4)THE ENERGY CALCULATIONS SPECIFY THE CEILING |
| | INSULATION AS R-30. THE SINGLE ASSEMBLY 2 X 6 FLAT ROOF |
| | ABOVE HIS CLOSET DOES NOT HAVE ENOUGH SPACE FOR R-30 |
| | INSULATION. PLEASE REVISE THE ENERGY CALCS. SEE FBC |
| | CHAPTER 13-6. |
| | |
| | 5) THE ROOF ZONES COMPONENT AND CLADDING FIGURE ON |
| | SHEET 2 IS INCORRECT. THE CORNERS OF THE HIP ROOF IS |
| | ZONE 3. SEE FIGURE R301.2(8). |
| | |
| | 6) SUBMIT PRODUCT APPROVALS FOR THE ROOFING MATERIAL |
| | FOR THE FLAT ROOF. FAC RULE 9B-72 |
| | |
| | 7) SUBMIT 2 COPIES OF THE PRODUCT APPROVALS. FBC 106.1* |
| | CITY AMENDMENTS |
| | |
| | 8) SPECIFY WHAT METHOD OF ATTACHMENT WILL BE USED TO |
| | INSTALL THE ROOF TILES. CIRCLE THE ATTACHMENT METHOD |
| | THAT WILL BE USED FROM THE ONES LISTED IN THE PRODUCT |
| | APPROVAL. SPECIFY WHICH ONE OF THE APPROVED ASSEMBLIES |
| | AND FASTENING OPTION THAT WILL BE USED TO INSTALL THE |
| | ROOFING MATERIAL FOR THE FLAT ROOF SECTION. IF ENHANCED |
| | FASTENING IS REQUIRED IN ORDER TO INCREASE THE DESIGN |
| | PRESSURES FOR THE PERIMETER AND CORNER AREAS, THEN |
| | SUBMIT RAS 117 CALCULATIONS (IF THIS IS ALLOWED BY |
| | LIMITATION #7 OF THE NOA). FBC 106.1.2* CITY |
| | AMENDMENTS. |
| | |
| | 9)WPB ADMIN CODE 106.3* PRODUCT |
| | APPROVALS. THOSE PRODUCT WHICH ARE |
| | REGULATED BY DCA RULE 9B-72 SHALL BE |
| | REVIEWED AND APPROVED IN WRITING BY THE |
| | DESIGNER OF RECORD PRIOR TO SUBMITTAL |
| | FOR JURISDICTIONAL APPROVAL. THE ENGINEER IS REQUIRED |
| | TO REVIEW AND APPROVE IN WRITING BOTH COPIES OF THE |
| | PRODUCT APPROVALS. |
| | |
| | ROBERT MCDOUGAL |
| | BLDG. PLAN REVIEW |
| | (561)805-6714 |
| | |
| | |
| | |
| | |
