| Date |
Text |
| 2007-07-03 15:25:38 | DENIED |
| | REFERENCE: |
| | ** FBC-2004 FUEL GAS. |
| | ** THE CITY OF WEST PALM BEACH GAS PERMIT APPLICATION |
| | REQUIREMENTS. |
| | ** FBC-2004 CHAPTER 1, THE CITY OF |
| | WEST PALM BEACH AMENDMENTS. |
| | ** FLORIDA ADMINISTRATIVE CODE. |
| | ** FLORIDA STATUTES. |
| | |
| | THE FOLLOWING CORRECTIONS/INFORMATION ARE REQUIRED FOR |
| | GAS PLAN REVIEW TO MEET CODE COMPLIANCE: |
| | |
| | 1. SHEET SP1, SITE PLAN: HAS AN EXISTING TITLE BLOCK |
| | FROM ISLAND DESIGNS, INC., ARCHITECTS AND PLANNERS PER |
| | FAC-61G1-16.004 TITLE BLOCK: |
| | A TITLE BLOCK MUST APPEAR ON ALL |
| | ARCHITECTURAL OR INTERIOR DESIGN |
| | DRAWINGS AND SPECIFICATION |
| | IDENTIFICATION SHEETS. THE TITLE BLOCK |
| | MUST, AT A MINIMUM, CONTAIN THE |
| | FOLLOWING INFORMATION: |
| | (1) FIRM NAME, ADDRESS, AND TELEPHONE |
| | NUMBER. |
| | (2) FIRM LICENSE NUMBER. |
| | (3) NAME OR IDENTIFICATION OF PROJECT. |
| | (4) DATE PREPARED. |
| | (5) A SPACE FOR THE SIGNATURE AND DATED |
| | SEAL. |
| | (6) A SPACE FOR THE PRINTED NAME OF THE |
| | PERSON SEALING THE DOCUMENT. |
| | (7) FIRMS CERTIFICATE OF AUTHORIZATION NUMBER REQUIRED |
| | PER FS 481.219. |
| | |
| | 2. ON TWO COPIES OF A SITE PLAN PLEASE |
| | CLEARLY SHOW THE LOCATION AND CAP- |
| | ACITY OF LP TANK(S), TYPE OF TANK (DOT |
| | OR ASME), THE DISTANCE OF THE TANK FROM |
| | THE BUILDING AND ADJACENT PROPERTY LINES |
| | THE DISTANCE OF THE TANK FROM ALL SOUR- |
| | CES OF IGNITION, OTHER CONTAINERS, BUILD |
| | INGS, AND THE LOCATION OF ANY BUILDING |
| | OPENINGS BELOW THE RELIEF VALVE OF THE |
| | TANK PER NFPA 58, 6.6.1, GENERAL REQUIREMENTS. |
| | |
| | 3. DELETE SHEET 9, FIGURE 1 CYLINDER AND TANK |
| | MANIFOLDING. THIS SHEET IS FOR AN UPRIGHT CYLINDER, |
| | PLEASE REFERENCE THE ENCLOSED PICTURE OF THE EXISTING |
| | TANK AT SAID ADDRESS THAT INDICATES A HORIZONTAL TANK. |
| | PLEASE CLEARLY INDICATE THAT THE THREE PROPOSED TANKS |
| | ARE LIKE THE EXISTING HORIZONTAL TANK ON THE |
| | RESUBMITTAL. |
| | |
| | 4. PLEASE ADD THE MATERIAL TYPE AND SIZES OF PIPE TO |
| | SHEET 10, CYLINDER AND TANK MANIFOLDING. |
| | |
| | 5. FBC-2004 CHAPTER 1,SECTION 106.3.4.2: |
| | THE PERSON RESPONSIBLE FOR THE DESIGN OF |
| | THE DRAWING SHALL CLEARLY PRINT AND SIGN |
| | NAME, AND ALSO DATE DRAWING. PLEASE DO |
| | THIS PRIOR TO RESUBMITTING. ALSO PLEASE DO THIS ON ALL |
| | HAND WRITTEN CHANGES ON SUBMITTALS AND SITE PLAN. |
| | |
| | END OF COMMENTS: |
| | |
| | REVIEW BY MIKE PERSON |
| | PLUMBING PLANS EXAMINER |
| | (561) 805-6730 |
| | FAX (561) 805-6731 |
| | E-MAIL [email protected] |
