| Date |
Text |
| 2007-10-27 16:08:42 | DENIED |
| | REFERENCE: FBC-2004 PLUMBING |
| | FBC-2004 CHAPTER 1 |
| | FLORIDA ADMINISTRATIVE CODE |
| | FLORIDA STATUTES |
| | |
| | 1. ALL SHEETS WITH THE ARCHITECTURAL TITLE BLOCK SHALL |
| | CONTAIN THE FIRM LICENSE NUMBER. FAC 61G1-16.004(2) & |
| | FS 481.219, 481.2055. |
| | |
| | 2. ALL SHEETS SIGN & SEALED SHALL SHOW THE DATE THAT |
| | THE SEAL AND SIGNATURE WERE AFFIXED TO THE PLANS. FAC |
| | 61G1-16.003, 61G1-16.004(5) & FS 481.2055. |
| | |
| | 3. SHT PME 1 OF 1, ALL PLUMBING, MECHANICAL & ELECTRIC |
| | SHEETS. THE SEAL IS NO LONGER VALID. (SEE ATTACHED |
| | LETTER FROM THE FLORIDA BOARD OF PROFESSIONAL |
| | ENGINEERS). THIS SEAL WAS TO BE CHANGED BY FEB. 2004. A |
| | GRACE PERIOD UP TO DEC. 31, 2005 WAS EXTENDED. PLEASE |
| | CHANGE SEAL TO APPROVED SEAL. |
| | |
| | 4. SHT PME 1 OF 1, ALL PLUMBING, MECHANICAL & ELECTRIC |
| | SHEETS. ENGINEERS SHALL LEGIBLY INDICATE THEIR NAME, |
| | ADDRESS, AND LICENSE NUMBER ON EACH SHEET. IF |
| | PRACTICING THROUGH A DULY AUTHORIZED ENGINEERING |
| | BUSINESS, ENGINEERS SHALLALSO INDICATE THE NAME, |
| | ADDRESS AND CERTIFICATE OF AUTHORIZATION NUMBER OF THE |
| | ENGINEERING BUSINESS ON EACH SHEET.61G15-23.002(2) & |
| | FS 471.025.--THE SIGNATURE OF THE ENGINEER SHALL |
| | BE AFFIXED ON THE SEAL. IT APPEARS THAT INITIALS HAVE |
| | BEEN USED IN PLACE OF A SIGNATURE. IF THIS IS INDEED |
| | THE LEGAL SIGNATURE OF THE ENGINEER, A LETTER SIGNED & |
| | SEALED BY THE ENGINEER AND NOTORIZED SHOWING THE LEGAL |
| | SIGNATURE OF THE ENGINEER SHALL BE SUBMITTED FOR OUR |
| | FILE. |
| | |
| | 5. SHT P 1 OF 1 SUBMIT AN ELEVATION DETAIL FOR THE BAR |
| | SHOWING HOW THE VENT IS 6" ABOVE THE HAND SINK PRIOR TO |
| | OFFSETTING AS REQUIRED IN SECTION 905.4. |
| | |
| | 6. SHT P1 OF 1 PLUMBER FIXTURE SCHEDULE ONLY SHOWS THE |
| | P5 FLOOR SINK. PLEASE SUBMIT THE INFORMATION FOR THE |
| | THREE COMPARTMENT SINK AND THE HAND SINK. SECTION |
| | 106.1.2. |
| | |
| | 7. SUBMIT A WATER ISOMETRIC RISER DIAGRAM. SHOW ALL |
| | PIPE SIZES, VALVES ETC. THAT REFLECTS THE FLOOR PLAN. |
| | SECTION 106.3.5.1.3(3)(10)(13). |
| | |
| | WHEN RESUBMITTING PLANS PLEASE INDICATE |
| | THE REVISION & REMOVE & REPLACE ANY |
| | PAGES AS NECESSARY. A TRANSMITTAL LETTER |
| | LISTING THE ORIGINAL REVIEW COMMENT NUMBER, |
| | WITH A DESCRIPTION OF THE REVISION |
| | MADE, IDENTIFYING THE SHEET OR SPECIFICATION |
| | PAGE WHERE THE CHANGES CAN BE FOUND |
| | WILL HELP TO EXPEDITE YOUR PERMIT. REMOVE ALL VOID |
| | SHEETS FROM ALL PLANS AND PLACE ONE SET OF THEM LOOSELY |
| | ON TOP OF THE COLLATED PLANS TO BE REVIEWED. THANK YOU |
| | FOR YOUR ANTICIPATED COOPERATION. |
| | |
| | REVIEW BY KEN STEVENS |
| | (561) 805-6721 |
| | FAX (561) 805-6731 |
| | E-MAIL [email protected] |
