| Date |
Text |
| 2007-05-22 10:30:50 | DENIED BY BUILDING |
| | |
| | 1) SPECIFY THE SQUARE FOOTAGE OF THE ROOF AREA THAT |
| | WILL BE COVERED. THE COST PER SQUARE FOOT FOR METAL |
| | ROOFING WILL BE $5.68 PER MARSHALL AND SWIFT. |
| | |
| | 2) A RECORDED COPY OF THE NOTICE OF COMMENCEMENT |
| | MUST BE SUBMITTED BEFORE A |
| | PERMIT CAN BE ISSUED. |
| | |
| | 3) PRODUCT APPROVALS SUBMITTED WITH |
| | PERMIT APPLICATION AFTER OCTOBER 1, 2003 |
| | ARE REQUIRED TO COMPLY WITH THE FLORIDA |
| | PRODUCT APPROVAL SYSTEM. FOR INFORMATION |
| | PLEASE SEE THE STATE WEBSITE AT |
| | WWW.FLORIDABUILDING.ORG. PRODUCTS WITH |
| | STATEWIDE APPROVAL ARE REQUIRED TO BE |
| | SUBMITTED WITH A COVER SHEET THAT LISTS |
| | THE PRODUCT IDENTITY NUMBER FROM THE |
| | STATE. SUBMIT TWO COPIES OF STATE PRODUCT APPROVALS. |
| | |
| | 4) SUBMIT TWO COPIES OF THE INSTALLATION INSTRUCTIONS |
| | FOR THE METAL ROOF, WHICH IS LISTED ON THE STATE |
| | WEBSITE. IF MORE THAN ONE TYPE OF ROOF PANEL SYSTEM IS |
| | LISTED, INDICATE THE ONE THAT WILL BE INSTALLED. |
| | SPECIFY THE FASTENER SPACING AND SUBSTRATE FOR THE |
| | REQUIRED WIND UPLIFT LOAD. THE UPLIFT IN ROOF ZONE 3 IS |
| | 83.1. CIRCLE THE APPROPRIATE ITEMS ON THE PRODUCT |
| | APPROVALS. |
| | |
| | 5) PLEASE CLARIFY IF THE METAL ROOF IS BEING INSTALLED |
| | OVER THE EXISTING SHINGLE ROOF OR ARE THE SHINGLES |
| | BEING REMOVED. IF THIS IS A ROOF OVER,A |
| | PRE-INSPECTION WILL BE REQUIRED TO DETERMINE THE |
| | CONDITION OF THE EXISTING ROOF. THE MANUFACTURES |
| | SPECIFICATIONS FOR RE-ROOFING WILL BE REQUIRED. |
| | |
| | ROBERT MCDOUGAL |
| | BLDG. PLAN REVIEW |
| | (561)805-6714 |
