| Date |
Text |
| 2007-06-16 09:51:51 | |
| | |
| | DENIED |
| | |
| | 1)BEFORE A PERMIT TO CONSTRUCT, MAY |
| | BE ISSUED, IMPACT FEES MUST BE PAID TO PALM BEACH |
| | COUNTY. THE ACTUAL PERMIT SETS OF PLANS MUST BE STAMPED |
| | BY THAT OFFICE, AND A COPY OF THE PAID RECEIPT ATTACHED |
| | TO THE PERMIT APPLICATION. PLEASE CALL (561) 233-5025 |
| | FOR MOREINFORMATION. |
| | |
| | 2)THE STATE OF FLORIDA REQUIRES COLLECTION OF A RADON |
| | SURCHARGE ON ALL NEW CONSTRUCTION COMPUTED ON UNDER |
| | ROOF FLOOR SPACE PER 10D-91 FAC. THESE FEES WILL BE |
| | ADDED TO THE PERMIT APPLICATION FEES. AMOUNT DUE $1.20 |
| | |
| | 3)SUBMIT TWO COPIES OF ENERGY CALC'S PER 13-101.2.2 |
| | FBC. BE SURE THAT THEY ARE SIGNED AND DATED BY PREPARER |
| | AND OWNER/AGENT PRIOR TO SUBMITTAL |
| | |
| | 4)THE FOLLOWING CORRECTIONS ARE REQUIRED ON THE |
| | PRODUCT APPROVALS |
| | A)2 DIFFERENT ROOFING SYSTEMS ARE INCLUDED IN THE GAF |
| | MODIFIED ROOFING PRODUCT APPROVAL ONE FOR COLD APPLIED |
| | AND ONE FOR HEAT WELD, PLEASE CHOOSE THE METHOD THAT |
| | WILL BE USED. |
| | B)THE JELD-WEN PRODUCT APPROVAL CONTAINS SEVERAL |
| | DIFFERENT DOOR TYPE PLEASE CHOOSE THE MODEL AND NOA# |
| | THAT WILL BE USED. NOTE SOME ARE NOT IMPACT RATED AND |
| | WOULD REQUIRE IMPACT PROTECTIVE COVERINGS. |
| | |
| | 5)THOSE PRODUCTS WHICH ARE REGULATED BY DCA RULE |
| | 9B-72 (PRODUCT APPROVALS) SHALL BE REVIEWED AND |
| | APPROVED IN WRITING BY THE DESIGNER OF RECORD PRIOR TO |
| | SUBMITTAL FOR JURISDICTIONAL APPROVAL PER 106.3.3 FBC* |
| | |
| | 6)PROVIDE SITE PLAN 2 COPIES OF A RECENT SURVEY |
| | SHOWING THE PROPOSED BUILDING/ADDITION WITH ALL SIDE |
| | AND REAR SETBACKS |
| | |
| | 7)PROVIDE THE FOLLOWING INFORMATION ON THE DRAWINGS: |
| | |
| | A)PROVIDE SMOKE ALARMS PER R313.1.1 FBC RES. |
| | B)PROVIDE NOTE FOR SHOWER DOORS TO BE SAFETY GLAZING |
| | PER R308.4 FBC RES. |
| | C)TERMITE TREATMENT IS REQUIRED ON ALL EXTERIOR |
| | CONCRETE WITHIN 1 FOOT OF PRIMARY STRUCTURE PER |
| | R320.1.6 FBC RES. |
| | D)PROVIDE PROTECTION AGAINST DECAY BY USE OF PRESSURE |
| | TREATED WOOD AT LOCATIONS PER R319 FBC RES. |
| | E)DRAWINGS SHALL SHOW THE MINIMUM DEPTH OF FOUNDATION |
| | ON THE WALL SECTIONS PER R403.1.4 FBC RES. |
| | |
| | 8)SHOW MORE DETAIL ON EXTERIOR BEARING WALL, PROVIDE |
| | WALL FRAMING IN ELEVATION TO PROVIDE CLEAR DETAILS ON |
| | THE CONNECTIONS BEING MADE AND THE SUPPORT OF THE (2) |
| | 2X10 BEAM ETC. SECTION S/1 ONLY SHOWS 2X4 POST BUT HAS |
| | 4X4 POST CONNECTORS. |
| | |
| | 9)ROOF FRAMING PLAN AND DETAIL S/1 SHOW DIFFERENT |
| | RAFTER CONNECTORS (FRAMING PLAN ACE4 AND S/I HAS H14 |
| | PLEASE MAKE CORRECTION. |
| | |
| | 10)DETAIL S/1 SHOWS GYPSUM AS EXTERIOR SHEATHING |
| | |
| | 11)PROVIDE NOTE FOR EXISTING EXTERIOR WINDOW THAT |
| | WILL BECOME PART OF INTERIOR BATHROOM WALL (REMOVAL AND |
| | INFILL REQUIREMENTS) |
| | |
| | 12)A RECORDED COPY OF THE NOTICE OF |
| | COMMENCEMENT IS REQUIRED PRIOR TO |
| | A PERMIT BEING ISSUED |
| | |
| | BLDG PLAN REVIEW |
| | ADRIAN MORSE |
| | 561-805-6716 |
| | |
| | |
