| Date |
Text |
| 2007-10-10 17:30:02 | 2004 FBC WITH 2007 SUPPLEMENT |
| | REVISION TO ADD GOLF COURSE SITE WORK AND INSTALL 2 |
| | GOLF CART BRIDGES TO IRRIGATION PERMIT |
| | |
| | REVISION DENIED BY BUILDING |
| | |
| | 1)SPECIFY THE STATE OF FLORIDA DEPARTMENT OF |
| | BUSINESS AND PROFESSIONAL REGULATION CERTIFICATE OF |
| | AUTHORIZATION NUMBER FOR THE ENGINEERING BUSINESS |
| | LISTED IN THE TITLE BLOCKS OF EACH DRAWING AND COMPLY |
| | WITH OTHER REQUIREMENTS OF FAC 61G15-23.002 SEAL, |
| | SIGNATURE AND DATE SHALL BE AFFIXED. |
| | EACH SHEET OF PLANS AND PRINTS WHICH MUST BE SEALED |
| | UNDER THE PROVISIONS OF CHAPTER 471, F.S., SHALL BE |
| | SEALED, SIGNED AND DATED BY THE PROFESSIONAL ENGINEER |
| | IN RESPONSIBLE CHARGE. ENGINEERS SHALL LEGIBLY INDICATE |
| | THEIR NAME, ADDRESS, AND LICENSE NUMBER ON EACH SHEET. |
| | IF PRACTICING THROUGH A DULY AUTHORIZED ENGINEERING |
| | BUSINESS, ENGINEERS SHALL LEGIBLY INDICATE THEIR NAME |
| | AND LICENSE NUMBER, AS WELL AS, THE NAME, ADDRESS, AND |
| | CERTIFICATE OF AUTHORIZATION NUMBER OF THE ENGINEERING |
| | BUSINESS ON EACH SHEET. A TITLE BLOCK ON EACH SHEET |
| | CONTAINING THE PRINTED NAME, ADDRESS, AND LICENSE |
| | NUMBER OF THE ENGINEER OR IF APPLICABLE, THE NAME AND |
| | LICENSE NUMBER OF THE ENGINEER, AND THE NAME, ADDRESS |
| | AND CERTIFICATE OF AUTHORIZATION NUMBER OF THE |
| | ENGINEERING BUSINESS WILL SATISFY THIS REQUIREMENT. |
| | ENGINEERS WORKING FOR LOCAL, STATE OR FEDERAL |
| | GOVERNMENT AGENCIES SHALL LEGIBLY INDICATE THEIR NAME |
| | AND LICENSE NUMBER, AND MAY INDICATE THE NAME AND |
| | ADDRESS OF THE AGENCY. A COVER OR INDEX SHEET FOR |
| | ENGINEERING SPECIFICATIONS MAY BE USED AND THAT SHEET |
| | MUST BE SIGNED, SEALED AND DATED BY THOSE PROFESSIONAL |
| | ENGINEERS IN RESPONSIBLE CHARGE OF THE PRODUCTION AND |
| | PREPARATION OF EACH SECTION OF THE ENGINEERING |
| | SPECIFICATION WITH SUFFICIENT INFORMATION ON THE COVER |
| | SHEET OR INDEX SO THAT THE USER WILL BE AWARE OF EACH |
| | PORTION OF THE SPECIFICATIONS FOR WHICH EACH |
| | PROFESSIONAL ENGINEER IS RESPONSIBLE. ENGINEERING |
| | REPORTS MUST BE SIGNED, SEALED AND DATED ON A SIGNATURE |
| | PAGE OR COVER LETTER BY EACH PROFESSIONAL ENGINEER WHO |
| | IS IN RESPONSIBLE CHARGE OF ANY PORTION OF THE REPORT. |
| | A PROFESSIONAL ENGINEER MAY ONLY SEAL AN ENGINEERING |
| | REPORT, PLAN, PRINT OR SPECIFICATION IF THAT |
| | PROFESSIONAL ENGINEER WAS IN RESPONSIBLE CHARGE OF THE |
| | PREPARATION AND PRODUCTION OF THE ENGINEERING DOCUMENT |
| | AND THE PROFESSIONAL ENGINEER HAS THE EXPERTISE IN THE |
| | ENGINEERING DISCIPLINE USED IN PRODUCING THE |
| | ENGINEERING DOCUMENT IN QUESTION. |
| | THE CERTIFICATE OF AUTHORIZATION NUMBER FOR THE |
| | ENGINEERING BUSINESS IS NOT LISTED ON THE FL DBPR |
| | WEBSITE. INDICATE THE CORRECT CA NUMBER ON THE PLANS OR |
| | REMOVE THE ENGINEERING BUSINESS INFORMATION. SEE |
| | FLORIDA STATUTES 471.023(2). THE ENGINEER'S SIGNATURE |
| | ON THE PLANS IS A COPY. THE ORIGINAL WET SIGNATURE OF |
| | THE ENGINEER IS REQUIRED ON THE PLANS. |
| | |
| | - ROBERT MCDOUGAL |
| | BLDG. PLAN REVIEW |
| | (561)805-6714 |
| | [email protected] |
