| Date |
Text |
| 2007-08-28 11:46:45 | 2004 FBC WITH 2007 SUPPLEMENT |
| | REVISION TO ADD GOLF COURSE SITE WORK AND INSTALL 2 |
| | GOLF CART BRIDGES TO IRRIGATION PERMIT |
| | |
| | REVISION DENIED BY BUILDING |
| | |
| | 1)CLARIFY THE SCOPE OF WORK ON THE REVISION FORM TO |
| | SPECIFY THE CONSTRUCTION OF TWO GOLF CART BRIDGES. |
| | |
| | 2)A NEW NOTICE OF COMMENCEMENT WILL BE REQUIRED TO BE |
| | RECORDED WITH THE SCOPE OF WORK CHANGED TO INCLUDE THE |
| | SITE WORK AND GOLF CART BRIDGE CONSTRUCTION. THE |
| | PREVIOUS ONE ONLY LISTS THE IRRIGATION WORK. |
| | |
| | 3)FBC 1802.2.1 QUESTIONABLE SOILS, |
| | 1802.2.1 QUESTIONABLE SOIL. |
| | WHERE THE SAFE-SUSTAINING POWER OF THE SOIL IS IN |
| | DOUBT, OR WHERE A LOAD-BEARING VALUE SUPERIOR TO THAT |
| | SPECIFIED IN THIS CODE IS CLAIMED, THE BUILDING |
| | OFFICIAL SHALL REQUIRE THAT THE NECESSARY INVESTIGATION |
| | BE MADE. SUCH INVESTIGATION SHALL COMPLY WITH THE |
| | PROVISIONS OF SECTIONS 1802.4 THROUGH 1802.6 . SUBMIT A |
| | SUBSURFACE SOIL REPORT FROM A SOILS ENGINEER. |
| | |
| | 4) REVISE THE CODE SPECIFIED ON SHEET S3 TO REFERENCE |
| | THE 2004 FLORIDA BUILDING CODE (BUILDING) WITH 2007 |
| | SUPPLEMENTS. |
| | |
| | 5) SPECIFY THE STATE OF FLORIDA DCA CERTIFICATE OF |
| | AUTHORIZATION NUMBER FOR THE ENGINEERING BUSINESS |
| | LISTED IN THE TITLE BLOCKS OF EACH DRAWING AND COMPLY |
| | WITH OTHER REQUIREMENTS OF FAC 61G15-23.002 SEAL, |
| | SIGNATURE AND DATE SHALL BE AFFIXED. |
| | EACH SHEET OF PLANS AND PRINTS WHICH MUST BE SEALED |
| | UNDER THE PROVISIONS OF CHAPTER 471, F.S., SHALL BE |
| | SEALED, SIGNED AND DATED BY THE PROFESSIONAL ENGINEER |
| | IN RESPONSIBLE CHARGE. ENGINEERS SHALL LEGIBLY INDICATE |
| | THEIR NAME, ADDRESS, AND LICENSE NUMBER ON EACH SHEET. |
| | IF PRACTICING THROUGH A DULY AUTHORIZED ENGINEERING |
| | BUSINESS, ENGINEERS SHALL LEGIBLY INDICATE THEIR NAME |
| | AND LICENSE NUMBER, AS WELL AS, THE NAME, ADDRESS, AND |
| | CERTIFICATE OF AUTHORIZATION NUMBER OF THE ENGINEERING |
| | BUSINESS ON EACH SHEET. A TITLE BLOCK ON EACH SHEET |
| | CONTAINING THE PRINTED NAME, ADDRESS, AND LICENSE |
| | NUMBER OF THE ENGINEER OR IF APPLICABLE, THE NAME AND |
| | LICENSE NUMBER OF THE ENGINEER, AND THE NAME, ADDRESS |
| | AND CERTIFICATE OF AUTHORIZATION NUMBER OF THE |
| | ENGINEERING BUSINESS WILL SATISFY THIS REQUIREMENT. |
| | ENGINEERS WORKING FOR LOCAL, STATE OR FEDERAL |
| | GOVERNMENT AGENCIES SHALL LEGIBLY INDICATE THEIR NAME |
| | AND LICENSE NUMBER, AND MAY INDICATE THE NAME AND |
| | ADDRESS OF THE AGENCY. A COVER OR INDEX SHEET FOR |
| | ENGINEERING SPECIFICATIONS MAY BE USED AND THAT SHEET |
| | MUST BE SIGNED, SEALED AND DATED BY THOSE PROFESSIONAL |
| | ENGINEERS IN RESPONSIBLE CHARGE OF THE PRODUCTION AND |
| | PREPARATION OF EACH SECTION OF THE ENGINEERING |
| | SPECIFICATION WITH SUFFICIENT INFORMATION ON THE COVER |
| | SHEET OR INDEX SO THAT THE USER WILL BE AWARE OF EACH |
| | PORTION OF THE SPECIFICATIONS FOR WHICH EACH |
| | PROFESSIONAL ENGINEER IS RESPONSIBLE. ENGINEERING |
| | REPORTS MUST BE SIGNED, SEALED AND DATED ON A SIGNATURE |
| | PAGE OR COVER LETTER BY EACH PROFESSIONAL ENGINEER WHO |
| | IS IN RESPONSIBLE CHARGE OF ANY PORTION OF THE REPORT. |
| | A PROFESSIONAL ENGINEER MAY ONLY SEAL AN ENGINEERING |
| | REPORT, PLAN, PRINT OR SPECIFICATION IF THAT |
| | PROFESSIONAL ENGINEER WAS IN RESPONSIBLE CHARGE OF THE |
| | PREPARATION AND PRODUCTION OF THE ENGINEERING DOCUMENT |
| | AND THE PROFESSIONAL ENGINEER HAS THE EXPERTISE IN THE |
| | ENGINEERING DISCIPLINE USED IN PRODUCING THE |
| | ENGINEERING DOCUMENT IN QUESTION. |
| | |
| | - ROBERT MCDOUGAL |
| | BLDG. PLAN REVIEW |
| | (561)805-6714 |
| | [email protected] |
