| Date |
Text |
| 2007-07-11 16:41:58 | ----------------DENIED------------------ |
| | |
| | ALL TECHNICAL ASPECTS OF PREVIOUS REVIEW COMMENTS HAVE |
| | BEEN SATISFIED. HOWEVER, THE ENGINEER OF RECORD HAS NOT |
| | SIGNED, SEALED, DATED AND LEGIBLY PRINTED HIS/HER NAME |
| | ON EACH SHEET OF THE MECHANICAL PLANS AS REQUIRED BY |
| | FAC RULE 61G15-23.002. THE RELEVANT SECTION IS PROVIDED |
| | FOR YOU BELOW: |
| | |
| | "(2) EACH SHEET OF PLANS AND PRINTS WHICH MUST BE |
| | SEALED UNDER THE PROVISIONS OF CHAPTER 471, F.S., SHALL |
| | BE SEALED, SIGNED AND DATED BY THE PROFESSIONAL |
| | ENGINEER IN RESPONSIBLE CHARGE. ENGINEERS SHALL LEGIBLY |
| | INDICATE THEIR NAME, ADDRESS, AND LICENSE NUMBER ON |
| | EACH SHEET. IF PRACTICING THROUGH A DULY AUTHORIZED |
| | ENGINEERING BUSINESS, ENGINEERS SHALL LEGIBLY INDICATE |
| | THEIR NAME AND LICENSE NUMBER, AS WELL AS, THE NAME, |
| | ADDRESS, AND CERTIFICATE OF AUTHORIZATION NUMBER OF THE |
| | ENGINEERING BUSINESS ON EACH SHEET. A TITLE BLOCK ON |
| | EACH SHEET CONTAINING THE PRINTED NAME, ADDRESS, AND |
| | LICENSE NUMBER OF THE ENGINEER OR IF APPLICABLE, THE |
| | NAME AND LICENSE NUMBER OF THE ENGINEER, AND THE NAME, |
| | ADDRESS AND CERTIFICATE OF AUTHORIZATION NUMBER OF THE |
| | ENGINEERING BUSINESS WILL SATISFY THIS REQUIREMENT." |
| | |
| | PLEASE PROVIDE ALL THE REQUIREMENTS OF THE ABOVE |
| | SECTION ON EACH SHEET OF PLANS. |
| | |
| | ALSO, THE OWNER AGENT HAS NOT SIGNED IN THE PLACE |
| | INDICATED ON THE CODE COMPLIANCE CERTIFICATION PAGE OF |
| | THE ENERGY CALCULATIONS. PLEASE CORRECT AND RESUBMIT |
| | PER FBC 13-103.1.2. |
| | |
| | RONALD J REGUEIRO |
| | 561.805.6719 |
| | [email protected] |
