| Date |
Text |
| 2008-02-05 17:15:40 | PLANNING AND ZONING DEPARTMENT |
| | |
| | ***FAILED*** |
| | |
| | 1. REPEAT COMMENT - PER SECTION 94-443(B) OF THE ZONING |
| | AND LAND DEVELOPMENT REGULATIONS, THE OWNER OF THE |
| | PROPERTY SHALL MAINTAIN A LANDSCAPE BUFFER STRIP ALONG |
| | THE ENTIRE EDGE OF THE PROPERTY ADJACENT TO A PUBLIC |
| | THOROUGHFARE AND OTHER NONRESIDENTIAL ZONING DISTRICTS. |
| | PER SECTION 94-443(B)(1), THE BUFFER STRIP SHALL BE AT |
| | LEAST 5 FEET IN WIDTH. |
| | A. LANDSCAPE PLANS, PREPARED, SIGNED AND SEALED BY A |
| | LANDSCAPE ARCHITECT, SHALL BE PROVIDED SHOWING |
| | COMPLIANCE WITH THIS REQUIREMENT.PLEASE REFER TO |
| | SECTION 94-443(B) OF THE ZONING AND LAND DEVELOPMENT |
| | REGULATIONS. |
| | |
| | 2. ACCORDING TO THE FLOOR PLANS, THERE IS AN A/C UNIT |
| | ALONG THE EAST BUILDING FA?ADE; HOWEVER, THIS IS NOT |
| | SHOWN ON THE SITE PLAN.PLEASE SHOW THE LOCATION OF |
| | THE A/C UNIT, WITH SETBACK DIMENSIONS, ON THE SITE |
| | PLAN.PLEASE NOTE THAT PER SECTION 94-305(B)(4), A/C |
| | UNITS MAY ONLY ENCROACH UP TO FOUR FEET INTO A |
| | SETBACK. |
| | |
| | 3. PER SECTION 94-444(B), PROVIDE HEDGES AROUND THE A/C |
| | UNIT TO SCREEN IT FROM ALL SIDES. |
| | |
| | 4. PROVIDE THE WIDTH, DEPTH, RADIUS AND SQUARE FOOTAGE |
| | DIMENSIONS OF THE PROPOSED DRIVEWAY ON THE SOUTH SIDE |
| | OF THE PROPERTY. |
| | |
| | 5. PROVIDE THE MATERIAL OF THE PROPOSED DRIVEWAY. |
| | STAFF RECOMMENDS THE USE OF UNSEALED PAVERS. |
| | |
| | 6. PLEASE SHOW CONNECTION POINT AND ACCESS WAY FROM THE |
| | BUILDING STRUCTURE TO THE PARKING LOT WEST OF THE SITE. |
| | A NOTE STATING THAT PARKING SPACES, INCLUDING THE |
| | HANDICAP PARKING SPACE, FOR THE DAYCARE FACILITY ARE |
| | AVAILABLE OFF-SITE SHALL BE NOTED ON THE SITE PLAN. |
| | |
| | 7. REPEAT COMMENT - PROVIDE A LETTER FROM THE |
| | ENGINEERING SERVICES DEPARTMENT STATING THERE IS NO |
| | NEED FOR A DUMPSTER. |
| | |
| | 8. DEPTH DIMENSION OF THE DEPTH OF THE HOUSE SHOULD |
| | READ 42.1 FEET AND NOT 42.1 INCHES.IN ADDITION, EAST |
| | SETBACK DIMENSION AT THE REAR OF THE STRUCTURE SHOULD |
| | READ 7.99 FEET AND NOT 7.99 INCHES. |
| | |
| | 9. PLEASE NOTE THAT REVISED/NEW PLANS MAY BE SUBJECT TO |
| | ADDITIONAL COMMENTS. |
| | |
| | COMMENTS/QUESTIONS, CONTACT ANDREINA DAVILA Q. OR ERIC |
| | SCHNEIDER, PRINCIPAL PLANNER, AT 822-1435. |
