| Date |
Text |
| 2007-03-19 12:56:57 | DENIED 2ND TIME |
| | REFERENCE: FBC-2004 FUEL GAS |
| | |
| | |
| | ** PLEASE SEE SOME NOTES FROM PREVIOUS REVIEW ARE STILL |
| | IN NEED OF ADDRESSING ALONG WITH SOME NEW COMMENTS, |
| | SOME BASED ON PLANS NOW SUBMITTED, NEW DOCUMENTS BEING |
| | REVIEWED FOR THE FIRST TIME AND SOME NEW COMMENTS NOT |
| | MADE ON PREVIOUS REVIEWS. |
| | |
| | ** PLEASE SEE THE NOTES BELOW ARE TAKEN DIRECTLY FROM |
| | PREVIOUS REVIEW WITH A NO, OK OR A NO/OK. |
| | THESE WILL BE FOR THE EXACT NUMERICAL NOTATION OF THE |
| | PREVIOUS REVIEW NOTES. |
| | |
| | A NO IS IF THE COMMENT WAS NOT FULLY ADDRESSED AND/OR |
| | FURTHER EXPLANATION OR CHANGES IN PLANS OR DOCUMENTS |
| | ARE STILL NEEDED. THIS REVIEWER WILL TRY TO BETTER |
| | EXPLAIN NOTE ABOVE PREVIOUS REVIEW COMMENT. |
| | |
| | AN OK WILL BE LABELED AS SUCH ON THE SAME NUMERICAL |
| | COMMENT AND WILL HAVE OLD NOTE REMOVED FROM COMMENTS. |
| | |
| | A NO/OK MEANS PART OF THE COMMENT MAY HAVE BEEN |
| | ADDRESSED, HOWEVER NOT ALL OF THE PREVIOUS REVIEW |
| | COMMENT MAY HAVE BEEN FULLY ADDRESSED. |
| | |
| | ** PLEASE SEE ANY NEW NOTES WILL BE ADDED TO THE END OF |
| | THE PREVIOUS REVIEW COMMENTS AND NOTED AS SUCH. |
| | |
| | 1.**OK** |
| | |
| | 2.**NO/OK** PLEASE INDICATE THE MAKE AND MODEL NUMBER |
| | OF THE 2LB MP REGULATOR FOR THE GENERATOR ON THE |
| | RESUBMITTAL. |
| | NOTE: IS IT YOUR INTENT TO USE A MAXITROL 325-5A MP |
| | REGULATOR FOR THE GENERATOR. PLEASE CLEARIFY ON THE |
| | RESUBMITTAL. |
| | |
| | THE FOLLOWING ARE NEW COMMENTS: |
| | |
| | 3. THE SUBMITTED GAS ISOMETRIC DOES NOT REFLECT THE |
| | FLOOR PLAN. FLOOR PLAN INDICATES GAS PIPE TO GENERATOR |
| | BEING PIPED FROM RANGE LOCATION, AND THE ISOMETRIC |
| | INDICATES GAS BEING PIPED FROM THE METER LOCATION TO |
| | THE GENERATOR. PLEASE CORRELATE AND CORRECT ON THE |
| | RESUBMITTAL. |
| | |
| | 4.SUBMIT AN ISOMETRIC DRAWING THAT |
| | CLEARLY SHOWS ALL CUT SECTIONS OF PIPE |
| | AND CORRESPONDING LENGTHS PER FBC-2004 |
| | FUEL GAS CODE. |
| | NOTE: THE SUBMITTED ISOMETRIC DOES NOT HAVE ALL |
| | CORRESPONDING LENGTHS INDICATED ON THE DRAWING. PLEASE |
| | CORRECT AND RESUBMIT. |
| | |
| | ********IMPORTANT INFORMATION******** |
| | IN ORDER TO EXPIDITE PLAN REVIEW: WHEN RESUBMITTING, |
| | PLEASE REPLACE ONLY SHEETS |
| | WHICH HAVE CHANGED AND PROVIDE ONE COPY |
| | OF ALL OLD/VOIDED SHEETS FOR REFERENCE |
| | ONLY. NOTE: ONLY ONE CORRECTED DRAWING |
| | IN RED INK FOR REFERENCE FOR |
| | RESUBMITTAL. |
| | |
| | END OF COMMENTS: |
| | |
| | REVIEW BY MIKE PERSON |
| | (561) 805-6730 |
| | FAX (561) 805-6731 |
| | E-MAIL [email protected] |
| | UNDER SUPERVISION OF K.STEVENS |
| | (561) 805-6721 |
