| Date |
Text |
| 2006-08-23 00:00:00 | DENIED BY BUILDING |
| | |
| | 1) A RECORDED COPY OF THE NOTICE OF |
| | COMMENCEMENT MUST BE SUBMITTED BEFORE A |
| | PERMIT CAN BE ISSUED. |
| | |
| | 2)IMPACT FEES MUST BE PAID TO PALM |
| | BEACH COUNTY, PLANS STAMPED BY THEM AND |
| | COPY OF RECEIPT SUBMITTED TO CITY OF |
| | WEST PALM BEACH BUILDING DEPARTMENT, |
| | BEFORE A BUILDING PERMIT CAN BE ISSUED. |
| | |
| | 3) THE EXISTING BUILDING LEVEL OF |
| | ALTERATION IS LEVEL 2 NOT LEVEL 3. LEVEL |
| | 3 ALTERATIONS APPLY WHERE THE WORK AREA |
| | EXCEEDS 50 PERCENT OF THE AGGREGATE AREA |
| | OF THE BUILDING AND MADE WITHIN ANY |
| | 12-MONTH PERIOD. |
| | |
| | 4) CLARIFY THAT A DOORWAY IS BEING |
| | CREATED BETWEEN THE EXISTING BEDROOM AND |
| | |
| | ENCLOSED CARPORT WHERE WINDOW IS BEING |
| | REMOVED. |
| | |
| | 5) THE EMERGENCY EGRESS REQUIREMENT OF |
| | R310 MUST BE MAINTAINED IN THE EXISTING |
| | BEDROOM ADJACENT TO THE ENCLOSED GARAGE. |
| | |
| | 6) GENERAL NOTE 3 ON SHEET 2 CALLS FOR |
| | 8" MASONRY WALLS AND THE FLOOR PLAN |
| | SPECIFIES 2X4 FRAME WALLS 24" OC AND THE |
| | FOUNDATION PLAN ON SHEET 3 HAS FRAMING |
| | 16"OC. PLEASE CORRECT. |
| | |
| | 7) SPECIFY THE CONNECTORS THAT WILL BE |
| | USED TO ANCHOR THE NEW WALL TO TRUSSES |
| | AND NEW WALL TO EXISTING BEAM. 1/4" X 6" |
| | WOOD SCREWS DO NOT APPEAR TO BE ADEQUATE |
| | FOR UPLIFT. |
| | |
| | 8) SPECIFY THE WASHER FOR THE ANCHOR |
| | BOLT AT THE BOTTOM PLATE. SEE R403.1.6. |
| | |
| | 9) ANCHOR BOLTS ARE REQUIRED TO EXTEND A |
| | MINIMUM OF 7 INCHES INTO CONCRETE. SEE |
| | R403.1.6. |
| | |
| | 10) R319.1 LOCATION REQUIRED. |
| | IN AREAS SUBJECT TO DECAY DAMAGE AS |
| | ESTABLISHED BY TABLE R301.2(1) , THE |
| | FOLLOWING LOCATIONS SHALL REQUIRE THE |
| | USE OF AN APPROVED SPECIES AND GRADE OF |
| | LUMBER, PRESSURE TREATED IN ACCORDANCE |
| | WITH AWPA C1, C2, C3, C4, C9, C15, C18, |
| | C22, C23, C24, C28, C31, C33, P1, P2 AND |
| | P3, OR DECAY-RESISTANT HEARTWOOD OF |
| | REDWOOD, BLACK LOCUST, OR CEDARS. |
| | 5.WOOD SIDING, SHEATHING AND WALL |
| | FRAMING ON THE EXTERIOR OF A BUILDING |
| | HAVING A CLEARANCE OF LESS THAN 6 INCHES |
| | (152 MM) FROM THE GROUND. |
| | SPECIFY THE CLEARANCE FROM FINISH GRADE |
| | TO WALL SHEATHING AND FRAMING. |
| | |
| | 11) SUBMIT ENERGY CALCULATION FORMS AS |
| | REQUIRED BY FBC 13-101.2. |
| | |
| | 12) SPECIFY THE CEILING/ATTIC INSULATION |
| | ON THE PLANS. |
| | |
| | 13) PRODUCT APPROVALS SUBMITTED WITH |
| | PERMIT APPLICATION AFTER OCTOBER 1, 2003 |
| | ARE REQUIRED TO COMPLY WITH THE FLORIDA |
| | PRODUCT APPROVAL SYSTEM. FOR INFORMATION |
| | PLEASE SEE THE STATE WEBSITE AT |
| | WWW.FLORIDABUILDING.ORG. PRODUCTS WITH |
| | STATEWIDE APPROVAL ARE REQUIRED TO BE |
| | SUBMITTED WITH A COVER SHEET THAT LISTS |
| | THE PRODUCT IDENTITY NUMBER FROM THE |
| | STATE. IF THE PRODUCT DOES NOT HAVE |
| | STATEWIDE APPROVAL, SUBMIT AN APPLICA- |
| | TION FOR LOCAL PRODUCT APPROVAL OR SITE |
| | SPECIFIC FORM PER RULE 9B-72. SUBMIT |
| | PRODUCT APPROVALS FOR THE EXTERIOR |
| | WINDOW, DOOR AND STRUCTURAL CONNECTORS. |
| | |
| | 14) W P B ADMINISTRTIVE CODE 106.3.3* |
| | PRODUCT APPROVALS. THOSE PRODUCTS WHICH |
| | ARE REGULATED BY DCA RULE 9B-72 SHALL BE |
| | REVIEWED AND APPROVED IN WRITING BY THE |
| | DESIGNER OF RECORD PRIOR TO SUBMITTAL |
| | FOR JURISDICTIONAL APPROVAL. |
| | |
| | 15) THE VALUE OF THE CONSTRUCTION HAS |
| | BEEN INCREASED TO $9343.OO BASED ON ICC |
| | CONSTRUCTION COST TABLE. INCLUDES LABOR |
| | AND MATERIAL COSTS CHARGED BY BUILDING |
| | CONTRACTORS. |
| | |
| | ROBERT MCDOUGAL |
| | BLDG. PLAN REVIEW |
| | (561)805-6714 |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
