| Date |
Text |
| 2006-06-22 00:00:00 | |
| | 1) THE APPLICATION DOES NOT INDICATE ANY |
| | FLAT ROOF. HOWEVER, PRODUCT APPROVALS |
| | WERE SUBMITTED. THE APPLICATION SHALL |
| | INDICATE THE AREA OF THE FLAT ROOF. |
| | DESCRIBE THE PROJECT IN DETAIL AS STATED |
| | ON THE APPLICATION. |
| | |
| | 2) THIS ROOF IS MISSING OR NOT IN |
| | COMPLIANCE WITH THE FOLLOW ITEMS: |
| | |
| | _XX__ THE SYSTEM PROVIDED HAS A LOW |
| | PRESSURE FOR ZONE _2 & 3__ . |
| | |
| | _XX__ THE SYSTEM PROVIDED STATES |
| | LIMITATION# 7, SHOULD THE FASTENER |
| | RESISTANCE BE LESS THAN THAT |
| | REQUIRED, AS DETERMINED BY THE |
| | BUILDING OFFICIAL, A REVISED |
| | FASTENER SPACING, PREPARED , SIGNED |
| | AND SEALED BY A FLORIDA REGISTERED |
| | PROFESSIONAL ENGINEER, REGISTERED |
| | ARCHITECT OR REGISTERED ROOF |
| | CONSULTANT MAY BE SUBMITTED. |
| | |
| | _XX__THE SYSTEM PROVIDED INDICATES |
| | LIMITATION# 9, NO ENHANCED |
| | FASTENING ALLOWED. |
| | |
| | |
| | 3) PRODUCTS WITH STATEWIDE APPROVAL ARE |
| | REQUIRED TO BE SUBMITTED WITH A COVER |
| | SHEET THAT LISTS THE PRODUCT IDENTITY |
| | NUMBER FROM THE STATE. IF THE PRODUCT |
| | DOES NOT HAVE STATEWIDE APPROVAL, SUBMIT |
| | AN APPLICATION FOR LOCAL PRODUCT |
| | APPROVAL OR SITE SPECIFIC FORM PER RULE |
| | 9B-72. SEE ATTACHMENT. |
| | WWW.FLORIDABUILDING.ORG. SEE EXAMPLE IN |
| | PACKAGE FOR ASPHALT SHINGLES.EACH |
| | PRODUCT NEEDS IT'S OWN COVER SHEETS. |
| | |
| | MYRON JACOBS |
| | BUILDING PLAN REVIEWER |
| | TEL:(561)805-6726 |
| | |
| | |
| | |
