| Date |
Text |
| 2006-07-27 00:00:00 | DENIED |
| | |
| | |
| | 1.BEFORE A PERMIT TO CONSTRUCT, MAY BE |
| | ISSUED, IMPACT FEES MUST BE PAID TO PALM |
| | BEACH COUNTY. THE ACTUAL PERMIT SET OF |
| | PLANS MUST BE STAMPED BY THAT OFFICE, |
| | AND A COPY OF THE PAID RECEIPT ATTACHED |
| | TO THE PERMIT APPLICATION. PLEASE CALL |
| | (561)233-5025 FOR MORE INFORMATION. |
| | |
| | 2.PERMIT VALUE SHOULD REFLECT THE |
| | COSTS OF ALL MATERIALS AND LABOR. |
| | ADJUST PERMIT VALUE OR WE WILL ADJUST IT |
| | ACCORDING TO MARSHALL AND SWIFT |
| | ESTIMATING GUIDE. ADDITIONAL PERMIT FEES |
| | ARE DUE. |
| | |
| | 3.SUBMIT TWO COPIES OF ENERGY CALCS |
| | PER 2004 FBC. |
| | |
| | 4.PRODUCT APPROVALS REQUIRED FOR |
| | STANDING SEAM ROOF, BASE UNDERLAYMENT |
| | FOR METAL ROOF, FLAT ROOF, STRAPS AND |
| | TIE-DOWNS AND EXTEWRIOR HOLLOW METAL |
| | DOOR. |
| | |
| | 5.ALL PRODUCT APPROVALS SUBMITTED WITH |
| | QUALITY ASSURANCE SHALL HAVE THE |
| | FOLLOWING STATE APPROVAL ATTACHED. |
| | |
| | PRODUCT APPROVALS SUBMITTED WITH |
| | PERMIT APPLICATION AFTER OCTOBER 1, 2003 |
| | ARE REQUIRED TO COMPLY WITH THE FLORIDA |
| | PRODUCT APPROVAL SYSTEM. FOR INFORMATION |
| | PLEASE SEE THE STATE WEBSITE AT |
| | WWW.FLORIDABUILDING.ORG. PRODUCTS WITH |
| | STATEWIDE APPROVAL ARE REQUIRED TO BE |
| | SUBMITTED WITH A STATE PRODUCT APPROVAL |
| | SHEETS THAT LISTS THE PRODUCT IDENTITY |
| | NUMBER FROM THE STATE. IF THE PRODUCT |
| | DOES NOT HAVE STATEWIDE APPROVAL, SUBMIT |
| | AN APPLICATION FOR LOCAL PRODUCT |
| | APPROVAL OR SITE SPECIFIC FORM PER RULE |
| | 9B-72. SEE ATTACHMENT. |
| | WWW.FLORIDABUILDING.ORG |
| | |
| | 6.THOSE PRODUCT APPROVALS WHICH ARE |
| | REGULATED BY DCA RULE 9B-72 SHALL BE |
| | REVIEWED AND APPROVED IN WRITING BY THE |
| | DESIGNER OF RECORD PRIOR TO SUBMITTAL |
| | FOR JURISDICTIONAL APPROVAL.WPB |
| | AMENDMENT TO FBC 106.3.3. |
| | |
| | 7.SUBMIT TWO SETS OF TRUSS DRAWINGS |
| | FOR REVIEW PER 2004 FBC R-802.10.1 |
| | TRUSS DRAWING REQUIRED TO BE APPROVED |
| | PRIOR TO INSTALLATION. |
| | |
| | 8.A DESIGN PROFESSIONAL OR AN OWNER |
| | MUST ELECT ONE OR A COMBINATION OF |
| | LEVELS OF ALTERATION PURSUANT TO |
| | SECTIONS 303, 304 AND 305 OF THIS CODE. |
| | SHOW HOW PLANS WILL COMPLY WITH THE |
| | SECTION(S) SELECTED.2004 FBC EXISTING |
| | BUILDING 301.5 |
| | |
| | 9.DOOR CLEARANCES, BATHROOM DOOR TO |
| | LADIES RESTROOM AND MANAGERS OFFICE |
| | SHALL HAVE A MINIMUM 18" CLEARANCE AT |
| | THE LATCH SIDE OF THE DOOR. SEE DIAGRAMS |
| | AT FBC 11.66. |
| | |
| | 10.MINIMUM PLAN REVIEW CRITERIA FOR |
| | BUILDINGS FBC 106.3.5 SHOW THE FOLLOWING |
| | INFORMATION ON PLANS. |
| | A. CONSTRUCTION TYPE |
| | B. OCCUPANCY GROUP |
| | C. OCCUPANT LOAD |
| | D. SPRINKLERED OR NOT |
| | E. CURRENT CODE SECTIONS USED |
| | |
| | 11.INCLUDE A LIFE SAFTEY PLAN AND |
| | INCLUDE EXIT ACCESS TRAVEL DISTANCE. FBC |
| | 1015.1 |
| | |
| | 12.SUBMIT TWO ORIGONAL SIGNED AND |
| | SEALED SURVEYS, FS. 472.025 |
| | |
| | 13.SHOW ACCESSABLE ROUTE FROM PARKING |
| | AREA INTO THE BUILDING FBC 11.4.3 |
| | |
| | 14.SHOW ROOF AND WALL SHEATHING |
| | COMPLYING WITH TABLE 2304.9.1 #31 FOR |
| | THICKNESS AND FASTENING SCHEDULE. |
| | |
| | 15.A SEPERATE PERMIT IT REQUIRED FOR |
| | AWNINGS. |
| | |
| | 16.SHOW SERVICE COUNTERS COMPLYING |
| | WITH FBC 11-7.2 |
| | |
| | |
| | WHEN RESUBMITTING PLANS PLEASE INDICATE |
| | THE REVISION & REMOVE & REPLACE ANY |
| | PAGES AS NECESSARY. SUBMIT ONE COPY OF |
| | OLD PAGES FOR REFERENCE . A TRANSMITTAL |
| | LETTER LISTING THE ORIGINAL REVIEW |
| | COMMENT NUMBER, WITH A DESCRIPTION OF |
| | THE REVISION MADE, IDENTIFYING THE SHEET |
| | OR SPECIFICATION PAGE WHERE THE CHANGES |
| | CAN BE FOUND WILL HELP TO EXPEDITE YOUR |
| | PERMIT. THANK YOU FOR YOUR ANTICIPATED |
| | COOPERATION. |
| | |
| | ART LANGE |
| | CONSTRUCTION SERVICES DEPARTMENT |
| | BUILDING PLANS EXAMINER |
| | 561-805-6672 |
| | |
| | |
| | |
