| Date |
Text |
| 2005-10-04 00:00:00 | BUILDING REVIEW CHECKLIST: |
| | 1- NEED FLORIDA PRODUCT APPROVAL OR |
| | APPLY FOR LOCAL PRODUCT APPROVAL AS |
| | REQUIRED BY RULE 9B-72 FROM DCA. SEE |
| | WWW.FLORIDABUILDING.ORG. |
| | DADE COUNTY NOA ALONE IS NOT AN |
| | STATEWIDE PRODUCT APPROVAL. |
| | MANUFACTURER MAY APPLY FOR LOCAL PRODUCT |
| | APPROVAL USING THE DADE COUNTY NOA |
| | REPORT AND COMPLETING THE LOCAL PRODUCT |
| | APPROVAL FORM DOWNLOADED FROM THE WEB |
| | WWW.FLORIDABUILDING.ORG. |
| | |
| | 2- IF USING DADE COUNTY NOA SUBMITTED, |
| | THEN, MAKE SURE THAT DRAWINGS ARE |
| | APPROVED AND STAMPED WITH THE DADE |
| | COUNTY APPROVAL STAMP. |
| | |
| | 3- PROVIDE COMPLETE INSTALLATION |
| | SCHEDULE. SEE ATTACHED SAMPLE. |
| | |
| | 4- PROVIDE COMPLETE KEY PLAN THAT |
| | CLEARLY ILLUSTRATES IF OPENING IS AT THE |
| | END OR INTERIOR ZONE TO HELP DETERMINE |
| | THE CALCULATED DESIGN PRESSURES. SEC. |
| | 1606 FBC 2001. |
| | |
| | 5- KEY PLAN TO ILLUSTRATE WHICH OPENING |
| | IS GOING TO BE USED FOR EMERGENCY EGRESS |
| | AS REQUIRED BY SEC. 1005.4.5 FBC 2001. |
| | |
| | 6- CLEARLY MARK ON SHUTTERS DRAWINGS |
| | (SHEETS 6 OF 7 OR 7 OF 7) SPECIFIC |
| | ANCHOR TYPE AND SPACING TO BE USED |
| | ACCORDING TO THE DESIGN PRESSURES, EDGE |
| | DISTANCE, PANEL SPAN, CONNECTION TYPE |
| | AND STRUCTURE TO BE ATTACHED TO |
| | (CONCRETE, CONCRETE BLOCK OR WOOD). SEC. |
| | 104.2.1.2 CITY AMENDMENTS TO FBC 2001. |
| | |
| | JULIO GOMEZ |
| | BUILDING PLANS EXAMINER |
| | (561)805-6712. |
