| Date |
Text |
| 2005-09-01 00:00:00 | ********** UNSAT ************ |
| | |
| | |
| | 1)NOTE: PLEASE SEE ZOING COMMENTS |
| | PERTAINING TO SITE PLAN. |
| | THIS SITE PLAN WILL ALSO INDICATE MIN |
| | CLEARENCE FROM DWELLING UNIT PER |
| | MANUFACTURES SPECS. |
| | PLEASE SEE BLDG COMMENTS FOR SLAB/TIE |
| | DOWN DETAIL REQUIRED. |
| | |
| | 2)NOTE: PLEASE SUBMIT TWO COPIES OF |
| | MANUFACTURES SPECS/CUT SHEETS FOR |
| | GENERATOR AND ATS. |
| | |
| | 3)NOTE: PLEASE SUBMIT A RISER DIAGRAM |
| | FOR ELECTRICAL SERVICE SHOWING |
| | INSTALLATION OF NEW EQUIPMENT. THIS |
| | SHOULD INCLUDE CONDUCTORS, CONDUIT, |
| | GROUNDING ETC. |
| | |
| | 4)NOTE: PLEASE SEE 225.31 FOR MISSING |
| | MEANS OF DISCONNECT. PLEASE SEE 225.34 |
| | FOR GROUPING OF THIS MEANS OF DISCONNECT |
| | WITH EXISTING MAIN. |
| | PLEASE SEE 225.36, THIS DISCONNECTING |
| | MEANS SHALL BE LISED AS "SERVICE |
| | EQUIPMENT". |
| | |
| | 5)NOTE: PLEASE PROVIDE |
| | LOADS/CALCULATIONS FOR ITEMS INSTALLED |
| | ON NEW PANEL. |
| | GEN LT AND RECEPTS LOADS ARE THE ONLY |
| | LOADS THAT MAY BE DE-RATED. |
| | ALL APPLIANCE, MOTOR, CONNECTED LOADS |
| | INCLUDING HEAT LOAD FROM A/C SHALL BE |
| | FIGURED AT 100%. |
| | 702.5 |
| | |
| | 6)NOTE: PLEASE BE SURE ALL |
| | PLANS/DRAWINGS CONTAIN THE PRINTED ANME |
| | AND SIGNATURE OF THE PERSON RESPONSIBLE |
| | FOR PLANS/ DESIGN. |
| | FBC 104.2.1, ADMINISTRATIVE CODE |
| | CITY-WIDE AMENDMENTS. |
| | |
| | 7)NOTE: PLEASE SEE THE VALUATION FOR |
| | PERMIT APPLICATION SHALL INCLUDE ALL |
| | LABOR AND MATERIALS EVEN IF MATERIALS |
| | (GEN) IS OWNER SUPPPLIED. |
| | 104.6.5 |
| | |
| | PLEASE SUBMIT THE ABOVE INFORMATION FOR |
| | REVIEW. IF THERE ARE ANY QUESTIONS, |
| | PLEASE DO NOT HESITATE TO CALL. |
| | |
| | DEWEY PALMER |
| | ELECTRICAL PLAN REVIEW |
| | CITY OF WEST PALM BEACH |
| | CONSTUCTION SERVICES DEPT. |
| | 561-805-6717 |
| | [email protected] |
| 2005-08-24 00:00:00 | |
| | PLEASE MAKE THE FOLLOWING CORRECTIONS |
| | FOR CODE COMPLIANCE AND RESUBMIT FOR |
| | REVIEW. |
| | |
| | 1) PR |
