| Date |
Text |
| 2005-03-17 00:00:00 | DENIED |
| | |
| | 1.BASED OM SBCCI BUILDING VALUATION |
| | DATA. THE VALUATION HAS BEEN CHANGED TO |
| | $325,246.00.ADDITIONAL PERMIT FEES OF |
| | $812.74 ARE DUE PRIOR TO ISSUING OF A |
| | PERMIT. |
| | |
| | 2.BEFORE A PERMIT TO CONSTRUCT, MAY |
| | BE ISSUED, IMPACT FEES MUST BE PAID TO |
| | PALM BEACH COUNTY. THE ACTUAL PERMIT |
| | SET OF PLANS MUST BE STAMPED BY THAT |
| | OFFICE, AND A COPY OF THE PAID RECEIPT |
| | ATTACHED TO THE PERMIT APPLICATION. |
| | PLEASE CALL (561)233-5025 FOR MORE |
| | INFORMATION. |
| | |
| | 3.SHOW HOW SMOKE DETECTORS WILL COMPLY |
| | WITH FBC 905.2 |
| | |
| | 4.PRODUCT APPROVALS WITH QUALITY |
| | ASSURANCE REQUIRED FOR LINTELS, STRAPS |
| | AND TIE-DOWNS AND HARDI-PLANK SIDING. |
| | ALL PRODUCT APPROVALS SUBMITTED REQUIRE |
| | THE FOLLOWING TO BE ATTACHED. |
| | PRODUCT APPROVALS SUBMITTED WITH |
| | PERMIT APPLICATION AFTER OCTOBER 1, 2003 |
| | ARE REQUIRED TO COMPLY WITH THE FLORIDA |
| | PRODUCT APPROVAL SYSTEM. FOR INFORMATION |
| | PLEASE SEE THE STATE WEBSITE AT |
| | WWW.FLORIDABUILDING.ORG. PRODUCTS WITH |
| | STATEWIDE APPROVAL ARE REQUIRED TO BE |
| | SUBMITTED WITH A COVER SHEET THAT LISTS |
| | THE PRODUCT IDENTITY NUMBER FROM THE |
| | STATE. IF THE PRODUCT DOES NOT HAVE |
| | STATEWIDE APPROVAL, SUBMIT AN APPLICA- |
| | TION FOR LOCAL PRODUCT APPROVAL OR SITE |
| | SPECIFIC FORM PER RULE 9B-72. SEE |
| | ATTACHMENT. WWW.FLORIDABUILDING.ORG |
| | |
| | |
| | 5.1015.3 OPENINGS. OPEN GUARDRAILS |
| | SHALL HAVE INTERMEDIATE RAILS OR ORNA- |
| | MENTAL PATTERNS SUCH AS A 4" DIAMETER |
| | SPHERE CAN NOT PASS THROUGH. A BOTTOM |
| | RAIL OR CURB SHALL BE PROVIDED THAT WILL |
| | REJECT THE PASSAGE OF 2" DIAMETER |
| | SPHERE.PLEASE SHOW A DETAIL ON PLANS. |
| | |
| | 6.SHOW SIZE AND LOCATION OF ATTIC |
| | ACCESS COMPLYING WITH FBC 2309.6 |
| | |
| | 7. A-9 #3 ROOF SHEATHING NAILING SHALL |
| | COMPLY WITH WPB AMMENDMENTS TO THE FBC |
| | SEC 2306.1 |
| | |
| | 8.INSULATION ON PLAN SHOW ROOF |
| | INSULATAION AT R-19 AND ENERGY CALS AT |
| | R-30. |
| | |
| | 9. NOTE: A-9 #3 FOOTING AND GRADE SHOWN |
| | BOTH ARE AT MINIMUM REQUIREMENTS. |
| | 12" FOOTING BELOW GRADE AND 4" FOR FF |
| | ABOVE GRADE. |
| | |
| | 10. RAYNOR GARAGE DOOR IS SUBMITTED WITH |
| | STATE APPROVAL AND IS MISSING A PRODUCT |
| | APPROVAL WITH QUALITY ASSURANCE. |
| | (MIAMI-DADE) FOR EXAMPLE. PLEASE ATTACH |
| | 2 COPIES TO STATE APPROVALS. |
| | |
| | 11. ALL PGT WINDOWS SUBMITTED ARE |
| | MISSING STATE APPROVALS ATTACHED. |
| | PRODUCT APPROVALS SUBMITTED WITH |
| | PERMIT APPLICATION AFTER OCTOBER 1, 2003 |
| | ARE REQUIRED TO COMPLY WITH THE FLORIDA |
| | PRODUCT APPROVAL SYSTEM. FOR INFORMATION |
| | PLEASE SEE THE STATE WEBSITE AT |
| | WWW.FLORIDABUILDING.ORG. PRODUCTS WITH |
| | STATEWIDE APPROVAL ARE REQUIRED TO BE |
| | SUBMITTED WITH A COVER SHEET THAT LISTS |
| | THE PRODUCT IDENTITY NUMBER FROM THE |
| | STATE. IF THE PRODUCT DOES NOT HAVE |
| | STATEWIDE APPROVAL, SUBMIT AN APPLICA- |
| | TION FOR LOCAL PRODUCT APPROVAL OR SITE |
| | SPECIFIC FORM PER RULE 9B-72. SEE |
| | ATTACHMENT. WWW.FLORIDABUILDING.ORG |
| | |
| | 12. SQUARE FOOTAGE ON APPLICATION HAS |
| | BEEN REVISED TO MATCH SQUARE FOOTAGE ON |
| | PLANS. |
| | |
| | |
| | WHEN RESUBMITTING PLANS PLEASE INDICATE |
| | THE REVISION & REMOVE & REPLACE ANY |
| | PAGES AS NECESSARY. A TRANSMITTAL LETTER |
| | LISTING THE ORIGINAL REVIEW COMMENT NUM- |
| | BER, WITH A DESCRIPTION OF THE REVISION |
| | MADE, IDENTIFYING THE SHEET OR SPECIFICA |
| | TION PAGE WHERE THE CHANGES CAN BE FOUND |
| | WILL HELP TO EXPEDITE YOUR PERMIT. THANK |
| | YOU FOR YOUR ANTICIPATED COOPERATION. |
| | |
| | ART LANGE |
| | BUILDING PLANS EXAMINER |
| | 805-6672 |
| | |
| | |
| | |
| | |
| | |
