| Date |
Text |
| 2005-03-12 00:00:00 | BUILDING PLAN REVIEW |
| | PERMIT: 05030338 |
| | ADD: 747 NCONGRESS ( CLUBHOUSE) |
| | CONT:WCI |
| | TEL: (561)775-2120 |
| | FL BLD CODE= 2001 FLORIDA BUILDING CODE |
| | * WEST PALM BEACH AMENDMENTS |
| | |
| | 1ST REVIEW |
| | ACTION: DENIED |
| | |
| | WHEN RESUBMITTING PLANS PLEASE INDICATE |
| | THE REVISION & REMOVE & REPLACE ANY |
| | PAGES AS NECESSARY. A TRANSMITTAL LETTER |
| | LISTING THE ORIGINAL REVIEW COMMENT NUM- |
| | BER, WITH A DESCRIPTION OF THE REVISION |
| | MADE, IDENTIFYING THE SHEET OR SPECIFICA |
| | TION PAGE WHERE THE CHANGES CAN BE FOUND |
| | WILL HELP TO EXPEDITE YOUR PERMIT. THANK |
| | YOU FOR YOUR ANTICIPATED COOPERATION. |
| | |
| | 1) PLEASE INDICATE THE CHANGE OF GRADE |
| | FOR ACCESSIBLE ENTRANCES INTO THE |
| | BUILDING. 11-4.1.3(1) AT LEAST ONE |
| | ACCESSIBLE ROUTTE COMPLYING WITH 11-4.3 |
| | SHALL CONNECT ACCESSIBLE BUILDING OR |
| | FACILITY ENETRANCES WITH ALL ACCESSIBLE |
| | SPACES AND ELEMENTS WITHIN THE BUILDING |
| | OR FACILITY. PROVIDE ACCESIBLE ROUTE. |
| | |
| | 2) THEATER INDICATES RAISED PLATFORMS: |
| | 11-4.1.2 VERTICAL ACCESSIBILITY, |
| | NOTHING IN THIS CODE SHALL BE CONSTRUED |
| | TO RELIEVE THE OWNER OF ANY BUILDING, |
| | SSTRUCTURE OR FACILITY FROM THE DUTY TO |
| | PROVIDE VERTICAL ACCESSIBILITY TO ALL |
| | LEVELS ABOVE OR BELOW THE OCCUPIABLE |
| | GRADE LEVEL.ALSO INDICATE COMPANION |
| | SEATING. |
| | |
| | 3)11-5.2 COUNTERS AND BARS |
| | WHERE FOOD OR DRINK IS SERVED @ COUNTERS |
| | EXCEEDING 34" IN HEIGHT FOR CONSUMPTION |
| | BY CUSTOMERS SEATED ON STOOLS OR STAND- |
| | ING AT THE COUNTER, A PORTION OF THE |
| | MAIN COUNTER WHICH IS 60" IN LENGTH MIN- |
| | IMUM SHALL BE PROVIDED IN COMPLIANCE |
| | WITH 11-4.32 OR SERVICE SHALL BE AVAIL- |
| | ABLE AT ACCESSIBLE TABLES WITHIN THE |
| | SAME AREA. |
| | |
| | 4) 11-4.24.2 SINKS, HEIGHT. SINKS |
| | SHALL BE MOUNTED WITH THE COUNTER NO |
| | HIGHER THAN 34" ABOVE THE FINISH FLOOR. |
| | 11-4.24.3 KNEE CLEARENCE THAT IS AT |
| | LEAST 27" HIGH 30" WIDE, AND 19" DEEP |
| | SHALL BE PROVIDED UNDERNEATH SINKS. |
| | |
| | 5) 2806.1.2 FACTORY BUILT FIREPLACES |
| | SHALL BE TESTED IN ACCORDANCE WITH AND |
| | MEET THE REQUIREMENTS OF UL 127. |
| | |
| | 6) 2804.4.1 FACTORY-BUILT CHIMNEYS |
| | FACTORY BUILT CHIMNEYS SHALL BE LISTED |
| | AND SHALL BE INSTALLED IN ACCORDANCE |
| | WITH THE CONDITIONS OF THE LISTING, AND |
| | MANUFACTURER'S INSTRUCTION.CHIMNEYS |
| | FOR THE USE WITH FACTORY- BUILT |
| | FIREPLACES SHALL MEET THE REQUIREMENTS |
| | OF UL 127. |
| | |
| | 7) PLEASE INDICATE COMPLIANCE WITH |
| | DEPARTMENT OF HEALTH RULE 64E-9 PUBLIC |
| | SWIMMING POOLS FOR "EFFECTIVE BARRIER" |
| | BETWEEN POOL AND CLUBHOUSE.FBC 424.1. |
| | |
| | 8) COMPILE PLANS INTO "SETS" INSERT |
| | A-11 THROUGH A-13 INTO THE SET OF PLANS. |
| | |
| | 9) PROVIDE SOILS REPORT (3): |
| | FL BLD CODE 1804.2.2 QUESTIONABLE SOILS, |
| | WHERE THE BEARING CAPACITY IS |
| | NOT DEFINETLY KNOWN OR IS IN QUESTION. |
| | WHERE THE BEARING CAPACITY OF THE SOIL |
| | IS NOT DEFINITLY KNOWN OR IS IN QUESTION |
| | THE BUILDING OFFICIAL MAY REQUIRE EXPLOR |
| | ATIONS, TEST OR OTHER ADEQUATE PROOF AS |
| | TO THE PERMISSIBLE SAFE BEARING |
| | CAPACITY. REQUIRED TEST AND RECOMMENDA- |
| | TIONS SUBMITTED TO VERIFY BEARING CAPA- |
| | CITY SHALL BE CERTIFIED BY A GEOTECH- |
| | NICALREPORT FROM A DESIGN PROFESSIONAL |
| | PROPERLY LICENSED IN THE STATE OF |
| | FLORIDA. |
| | |
| | 10) ATTIC VENTILATION 2309.7.1/ 103.7 |
| | ALTERNATE MATERIALS & METHODS, |
| | WILL BE PERMITTED: |
| | 1) UNVENETED ATTIC SYSTEMS/ASSEMBLIES |
| | ARE DESIGNED BY A FLORIDA REGISTERED |
| | DESIGN PROFESSIONAL. |
| | 2) INSULATION MUST BE CONTINUOUSLY IN |
| | THE UPPER PLANE OF THE ROOF ASSEMBLIES |
| | DECK/ SHEATHING WITH SPECIFIED, APPROVED |
| | INSULATION PRODUCTS, AND THE CEILING |
| | PLANE (SPACE) IS NOT SEPERATED FROM THE |
| | CONDITIONED HABITABLE SPACE BELOW, WITH |
| | INSULATION. |
| | 3) WHEN UNVENTED ATTIC SYSTEMS ARE |
| | SPECIFIED IN CONJUNCTION WITH ASPHALT |
| | BASED ROOFING PRODUCTS, THE ROOFING |
| | MATERIAL/ SYSTEM MANUFACTURER SHALL |
| | PROVIDE AN AFFIDAVIT CERTIFYING USE OF |
| | THEIR PRODUCT OVER UNVENTED ATTIC |
| | SYSTEMS. |
| | IF THESE 3 LISTED QUALIFIERS ARE MET THE |
| | |
| | PALM BEACH COUNTY BUILDING BOARD |
| | ADVISORY BOARD HAS APPROVED THIS |
| | INSTALLATION UNDER 103.7.PROVIDE |
| | DOCUMENTATION. |
| | |
| | 11) FL BLD CODE 1606.1.5: COMPONENTS & |
| | CLADDING, PROVIDE 2 COPIES(3 IF THRESH- |
| | OLD OR RESIDENT INSPECTOR) OF PRODUCT |
| | TESTING REPORTS,MISSING REPORTS ARE AS |
| | FOLLOWS: |
| | A)SINGLE HUNG WINDOWS |
| | B) OVERHEAD GARAGE DOOR |
| | C) LOUVERS |
| | D) BAHAMA STYLE STORM SHUTTERS |
| | PRODUCT APPROVALS SUBMITTED WITH |
| | PERMIT APPLICATION AFTER OCTOBER 1, 2003 |
| | ARE REQUIRED TO COMPLY WITH THE FLORIDA |
| | PRODUCT APPROVAL SYSTEM. FOR INFORMATION |
| | PLEASE SEE THE STATE WEBSITE AT |
| | WWW.FLORIDABUILDING.ORG. PRODUCTS WITH |
| | STATEWIDE APPROVAL ARE REQUIRED TO BE |
| | SUBMITTED WITH A COVER SHEET THAT LISTS |
| | THE PRODUCT IDENTITY NUMBER FROM THE |
| | STATE. IF THE PRODUCT DOES NOT HAVE |
| | STATEWIDE APPROVAL, SUBMIT AN APPLICA- |
| | TION FOR LOCAL PRODUCT APPROVAL OR SITE |
| | SPECIFIC FORM PER RULE 9B-72. SEE |
| | ATTACHMENT. WWW.FLORIDABUILDING.ORG |
| | |
| | 12) FL BLD CODE 104.2.1.2 |
| | ADDITIONAL INFORMATION REQUIRED, |
| | A-9 SECTION Q INDICATES A LOAD BEARING |
| | WALL WITH TRUSSES ABOVE S4 DETAIL 8 |
| | INDICATES THE SAME SECTION BUT NO |
| | MENTION OF HOW TO STRAP THE TRUSSES |
| | ABOVE? DETAIL # 8 ON STRUCTURAL |
| | INDICATES THERE IS NO UPLIFT EXPLAIN? |
| | |
| | 13) CORRECT S6 WIRE LATH NOTES REFRENCE |
| | TO 2507& 2507.3 BOTH THESE SECTIONS DEAL |
| | WITH THE HIGH VELOCITY HURRICANE ZONES, |
| | SHEET S6 FASTENER SCHEDULE: WIRE LATH |
| | & 3/8" METAL RIB LATH THE SECTIONS |
| | QOUTED 2507 ARE THE HIGH VELOCITY HURRI- |
| | CANE ZONE. THE CORRECT SECTION IS |
| | 2504.2.2 INSTALLATION OF EXTERIOR LATH- |
| | ING AND FRAMING SHALL COMPLY WITH ASTM |
| | C-1063.THE FIRST QUESTION IS FOR THE |
| | WIRE LATH, DIAMOND MESH WHAT WILL THE |
| | MINIMUM WEIGHT BE OF THE METAL PLASTER |
| | BASE? SEE FOOTNOTE "D" ON VERTICAL APPLI |
| | CATIONS, WIRE LATH SHALL BE FURRED AWAY |
| | FROM VERTICAL SUPPORTS OR SOLID SHEATH- |
| | ING AT LEAST 1/4". ONCE THE MINIMUM |
| | WEIGHT IS KNOWN WHAT IS THE MAXIMUM |
| | CENTER TO CENTER, WALLS AND CEILINGS. |
| | CORRECT MINIMUM EMBEDMENT FOR VERTICAL |
| | AND HORIZONTAL APPLICATIONS AND SPACING |
| | OF FASTENER.PROVIDE THE ACTUAL |
| | DIAMETER & LENGHT OF NAILSREQUIRED FOR |
| | FLAT WIRE LATH AND RIBBED LATH BOTH FOR |
| | HORIZONTAL AND VERTICAL SURFACES. WE |
| | ALSO NEED TO KNOW THE WEIGHT OF THE WIRE |
| | LATH SPECIFIED FOR HRIZONTAL RUNS FOR |
| | SPAN LIMITATION. THE CODE REFERS YOU TO |
| | ASTM C-1063 TO LOCATE THE REQUIRED SPANS |
| | WEIGHT AND NAIL PENETRATION REQUIRED FOR |
| | EACH APPLICATION. |
| | |
| | 14) BEFORE A PERMIT TO CONSTRUCT, MAY BE |
| | ISSUED, IMPACT FEES MUST BE PAID TO PALM |
| | BEACH COUNTY. THE ACTUAL PERMIT |
| | SET OF PLANS MUST BE STAMPED BY THAT |
| | OFFICE, AND A COPY OF THE PAID RECEIPT |
| | ATTACHED TO THE PERMIT APPLICATION. |
| | PLEASE CALL (561)233-5025 FOR MORE |
| | INFORMATION. |
| | |
| | BUILDING PLAN REVIEW |
| | JIM WITMER |
| | TEL: (561)805-6715 |
| | FAX: (561)659-8026 |
| | |
| | |
| | |
| | |
