| Date |
Text |
| 2005-05-31 00:00:00 | DENIED |
| | REFERENCE: FBC-2001 PLUMBING |
| | FBC-2001 FUEL GAS |
| | FBC-2001 CHAPTER 1 |
| | |
| | A. FROM PREVIOUS REVIEW: |
| | 1. GREASE TRAPS ARE REQUIRED TO HAVE |
| | UTILITY DEPT. APPROVAL. PLEASE CONTACT |
| | RODNEY COMPO AT (561) 837-4074. ALSO BY |
| | E-MAIL [email protected]. - PLEASE SUBMIT |
| | DETERMINATION SHEET FROM MR. COMPO. |
| | GAS: |
| | 6. SUBMIT MANUFACTURE SHEETS FOR ALL GAS |
| | EQUIPMENT TO VERIFY COMPLIANCE WITH |
| | STANDARDS NFPA 54, NFPA 58, AND THE |
| | FBC-2001 FUEL GAS CODE SEC 402.2 |
| | **************NEW COMMENTS************** |
| | 1B. SHT A-1.1 EQUIPMENT SCHEDULE, ITEM |
| | 21 SHOWS INDIRECT WASTE, BUT ITEM 21 WAS |
| | NOT SHOWN ON THE EQUIPMENT PLAN. PLSEAS |
| | CLARIFY. SECTION 104.2.1. |
| | ITEM 22 WHERE DOES SHOWS A 3/4" DRAIN ON |
| | THE EQUIPMENT SCHEDULE, BUT THERE IS NO |
| | INDICATION OF THIS ON THE EQUIPMENT PLAN |
| | NOR ON THE RISER DIAGRAM. PLEASE |
| | CLARIFY. SECTION 104.2.1. |
| | 2B. SHT A-3 CAN WASH DWV NOT SHOWN ON |
| | THE PLUMBING PLAN AND NO VENT SHOWN ON |
| | SANT. RISER. SECTIONS 901.2.1 & 104.2.1. |
| | 3B. ARCHITECT AND ENGINEER SHALL AFFIX |
| | THEIR SEAL, SIGN AND DATE ALL SHEETS |
| | PREPARED BY THEM. SECTION 104.2.2. SEE |
| | SHEETS NOT SIGNED, SEALED, & DATED. |
| | |
| | REVIEW BY KEN STEVENS |
| | (561) 805-6721 |
| | FAX (561) 653-2692 |
| | E-MAIL [email protected] |
| | |
