| Date |
Text |
| 2005-01-25 00:00:00 | DENIED |
| | |
| | |
| | 1.PLANS DO NOT REFLECT WORK ON |
| | ORIGONAL APPLICATION. |
| | |
| | 2.SHOW ON PLANS NEW AND EXISTING |
| | WORK. |
| | |
| | 3. PLANS SHOW FOUNDATION WORK.SHOW NEW |
| | AND EXISTING AREAS. IS THE EXTERIOR |
| | BEARING WALL ON SECTION "A" CANTELEVERED |
| | OUT 2 FT? |
| | |
| | 4.SHOW NEW WINDOWS AND DOORS, TYPES |
| | AND SIZES. |
| | |
| | 5.SUBMIT PRODUCT APPROVALS FOR THE |
| | FOLLOWING.STRAPS AND TIEDOWNS, |
| | ROOFING, WINDOWS, EXTERIOR DOORS AND |
| | IMPACT PROTECTION. |
| | ALL PRODUCT APPROVALS REQUIRE THE |
| | FOLLOWING TO BE ATTACHED TO THE QUALITY |
| | ASSURANCE REPORTS. |
| | PRODUCT APPROVALS SUBMITTED WITH |
| | PERMIT APPLICATION AFTER OCTOBER 1, 2003 |
| | ARE REQUIRED TO COMPLY WITH THE FLORIDA |
| | PRODUCT APPROVAL SYSTEM. FOR INFORMATION |
| | PLEASE SEE THE STATE WEBSITE AT |
| | WWW.FLORIDABUILDING.ORG. PRODUCTS WITH |
| | STATEWIDE APPROVAL ARE REQUIRED TO BE |
| | SUBMITTED WITH A COVER SHEET THAT LISTS |
| | THE PRODUCT IDENTITY NUMBER FROM THE |
| | STATE. IF THE PRODUCT DOES NOT HAVE |
| | STATEWIDE APPROVAL, SUBMIT AN APPLICA- |
| | TION FOR LOCAL PRODUCT APPROVAL OR SITE |
| | SPECIFIC FORM PER RULE 9B-72. SEE |
| | ATTACHMENT. WWW.FLORIDABUILDING.ORG |
| | |
| | |
| | WHEN RESUBMITTING PLANS PLEASE INDICATE |
| | THE REVISION & REMOVE & REPLACE ANY |
| | PAGES AS NECESSARY. A TRANSMITTAL LETTER |
| | LISTING THE ORIGINAL REVIEW COMMENT NUM- |
| | BER, WITH A DESCRIPTION OF THE REVISION |
| | MADE, IDENTIFYING THE SHEET OR SPECIFICA |
| | TION PAGE WHERE THE CHANGES CAN BE FOUND |
| | WILL HELP TO EXPEDITE YOUR PERMIT. THANK |
| | YOU FOR YOUR ANTICIPATED COOPERATION. |
| | |
| | ART LANGE |
| | BUILDING PLANS EXAMINER |
| | 805-6672 |
