| Date |
Text |
| 2004-08-23 00:00:00 | ****CORRECTIONS**** |
| | |
| | SAMANTHA HILL, BUILDING PLANS EXAMINER |
| | [email protected] |
| | |
| | 1.)AS PER PALM BEACH COUNTY REQUEST |
| | (WILLY SWOPE), PLEASE TAKE THE OLD |
| | PLANS AND THE NEW STAMPS TO IMPACT |
| | FEES TO HAVE THE NEW PLANS STAMPED. |
| | 233-5025 |
| | |
| | 2.)A NOTICE OF COMMENCEMENT MUST BE |
| | FILED WITH THE CLERK OF COURTS BEFORE A |
| | PERMIT CAN BE ISSUED. |
| | |
| | 3.)FLORIDA STATE PRODUCT APPROVALS |
| | REQUIRED IN ADDITION TO THE DADE COUNTY |
| | NOAS.WWW.FLORIDABUILDING.ORG |
| | (PRODUCT APPROVALS, PRODUCT SEARCH). |
| | SEE ATTCHED EXAMPLE. |
| | |
| | 4.)IMPACT PROTECTION REQUIRED FOR THE |
| | GLASS BLOCK, SEE NOA.THIS IS IN |
| | CONFLICT WITH THE PLANS, A3, WHICH |
| | SPECIFY IMPACT RATED GLASS BLOCK. |
| | |
| | 5.)REGARDING THE ROOF CALCS - |
| | REFERS TO 24 GA STEEL (THIS JOB IS |
| | 22 GAGE) |
| | CA NUMBER REQUIRED FOR WEYANT ENG. |
| | PRINTED NAME AND LICENSE NUMBER OF |
| | THE PERSON SEALING THE DOCUMENT |
| | ORIGINAL SIGNED, SEALED DATED |
| | FAC61G15-23.002. |
| | |
| | HOWEVER, PLEASE NOTE THAT THE DESIGN |
| | PRESSURE ON THE PLAN FOR THE ROOF IS |
| | -33 (S1), SO THE SYSTEM (-75) APPEARS |
| | COMPLIANT WITHOUT THE ENGINEERING |
| | FASTENING FOR ZONE 3.CLARIFY, PLEASE. |
| | |
| | 6.)REGARDING THE PRODUCT APPROVALS |
| | FOR THE OHDOOR&SKYLITE PLEASE NOTE THAT |
| | THE LAST SHEETS DID NOT PRINT PROPERLY. |
| | I HAVE REPRINTED THE NOAS FOR YOU BUT |
| | IN THE FUTURE PLEASE BE SURE THAT THE |
| | NOAS ARE COMPLETE AND LEGIBLE.ALSO |
| | HAS AN EXTRA SHEET REGARDING CBAA |
| | CASES; ?????NOAS ARE AVAILABLE AT |
| | WWW.MIAMIDADE.GOV (FIND A DEPARTMENT, |
| | BUILDING CODE COMPLIANCE, PRODUCT |
| | SEARCH). |
| | |
| | 7.)CA NUMBER REQUIRED FOR ARCHITECT |
| | BUSINESS, PRINTED NAME OF THE PERSON |
| | SEALING THE DOCUMENT FAC61G1-16.003,004. |
| | CA NUMBER REQUIRED FOR ENGINEERING |
| | BUSINESS, PRINTED NAME AND LICENSE NO. |
| | OF THE PERSON SEALING THE DOCUMENT. |
| | FAC61G23-002.THIS IS REQUIRED ON EACH |
| | SHEET. |
| | |
| | 8.)AS DISCUSSED, PLEASE REVISE THE |
| | PERMIT APPLICATION TO REFLECT THE |
| | SCOPE OF WORK (PHASE II ONLY AS PHASE |
| | I HAS BEEN PERMITTED AND COMPLETED |
| | SEPARATELY). |
| | |
| | 9.)TWO SETS OF DOCUMENTATION WERE |
| | SUBMITTED FOR THE 610 OVERHEAD DOOR. |
| | THE NOA SHOWS A DESIGN PRESSURE OF |
| | 68.9, BUT THE SPECS SHOW WINDLOAD DESIGN |
| | OF 20 (ITEM E).ALSO THE SPECS APPEAR |
| | TO REFER TO THE SAME PRODUCT BUT REFERS |
| | TO A DIFFERENT NOA NUMBER THAN THE ONE |
| | SUBMITTED. |
| | |
| | 10.) 3-A3 INDICATES TO INFILL WITH |
| | "UL".PLEASE PROVIDE AN ASSEMBLY |
| | NUMBER. |
