| Date |
Text |
| 2004-08-06 00:00:00 | DENIED |
| | |
| | 1.BEFORE A PERMIT TO CONSTRUCT, MAY |
| | BE ISSUED, IMPACT FEES MUST BE PAID TO |
| | PALM BEACH COUNTY. THE ACTUAL PERMIT |
| | SET OF PLANS MUST BE STAMPED BY THAT |
| | OFFICE, AND A COPY OF THE PAID RECEIPT |
| | ATTACHED TO THE PERMIT APPLICATION. |
| | PLEASE CALL (561)233-5025 FOR MORE |
| | INFORMATION. |
| | |
| | 2.CURRENT CODE USED IS THE 2001 |
| | FLORIDA BUILDING CODE. |
| | |
| | 3.SHOW HOW ATTACHMENT OF THE 2 X 6 |
| | AND 2 X 8 LEDGERS WILL BE COMPLETED. |
| | SHOW SIZE AND SPACING OF FASTENERS. |
| | |
| | 4.SHOW SIZE OF REINFORCEMENT USED ON |
| | PLANS FOR FOOTINGS AND BLOCK WALLS. |
| | |
| | 5.SHOW TIE BEAM DETAIL. |
| | |
| | 6.SHOW METHOD OF TIE IN FOR WALLS |
| | FROM EXISTING TO NEW AREAS. |
| | |
| | 7.SUBMIT 2 COPIES OF A SOILS REPORT. |
| | |
| | 8.SPECIFY TYPES OF STRAPS AND TIE |
| | DOWNS USED.SUBMIT SCHEDULE SHOWING |
| | TYPE OF STRAPS AND FASTENERS USED. |
| | |
| | 9.JEN-WELD DOOR IS AN OUT SWING DOOR. |
| | DOOR SHOWN IS AN INSWING DOOR. |
| | |
| | 10.IMPACT PROTECTION IS REQUIRED. |
| | SUBMIT 2 COPIES OF PRODUCT APPROVALS. |
| | |
| | 11.SUBMIT 2 COPIES OF PRODUCT |
| | APPROVALS FOR CIRCULAR WINDOW. |
| | |
| | 12.SHOW LOCATION OF ROOMS ON PLANS. |
| | |
| | 13.SHOW NEW BEDROOMS AND EXISTING |
| | BEDROOMS ON PLANS SO THAT WE CAN CHECK |
| | FOR EMERGENCY ESCAPE AND RESCUE OPENINGS |
| | SHOW HEIGHT OF WINDOW SILLS IN |
| | BEDROOMS. |
| | |
| | 14.SMOKED DETECTORS SHALL COMPLY WITH |
| | FBC 905.2 SHOW ON PLANS. |
| | |
| | 15.FBC 104.2.1 NAME AND SIGNATURE OF |
| | PERSON RESPONSIBLE FOR DESIGN IS |
| | REQUIRED ON ALL PLANS. |
| | |
| | 16.BASED ON SBCCI BUILDING VALUATION |
| | DATA THE BUILDING VALUATION HAS BEEN |
| | CHANGED TO $35,863. |
| | 466 SQ. FT. X $76.96 PER SQ. FT =35,863 |
| | ADDITIONAL PERMIT FEES ARE DUE. |
| | |
| | 17. SHOW HOW COMPLIANCE WILL BE MADE TO |
| | FBC 3401.7.1.2.1 |
| | |
| | 18. QUALITY OF BUILDING PLANS: |
| | BUILDING PLANS SHALL BE DRAWN TO A |
| | MINIMUM OF 1/8' SCALE.SHOW SCALE ON |
| | DRAWINGS. ALSO SHOW SUFFICIENT |
| | INFORMATION SO THAT SQUARE FOOTAGE CAN |
| | BE CALCULATED. |
| | |
| | 19.FBC CHAPTER 13 SUBMIT 2 COPIES OF |
| | ENERGY CALCS FORM 600C. |
| | |
| | 20.SPECIFY SHEATHING SIZE, FASTRENERS |
| | USED AND NAILING SCHEDULE. |
| | |
| | 21.FBC 2309.6 SHOW ATTIC ACCESS AND |
| | SIZE. |
| | |
| | 22.SUBMIT 2 COPIES OF PRODUCT |
| | APPROVALS FOR METAL ROOFING.APPROVAL |
| | SUBMITTED IS FOR TILE. |
| | |
| | NOTE: MENTIONING COMPLIANCE WITH CODE |
| | SECTIONS IS OK BUT DETAILS FOR THOSE |
| | CODE SECTIONS MAY STILL BE REQUIRED. |
| | |
| | NOTE:PRODUCT APPROVALS SUBMITTED WITH |
| | PERMIT APPLICATION AFTER OCTOBER 1, 2003 |
| | ARE REQUIRED TO COMPLY WITH THE FLORIDA |
| | PRODUCT APPROVAL SYSTEM. FOR INFORMATION |
| | PLEASE SEE THE STATE WEBSITE AT |
| | WWW.FLORIDABUILDING.ORG. PRODUCTS WITH |
| | STATEWIDE APPROVAL ARE REQUIRED TO BE |
| | SUBMITTED WITH A COVER SHEET THAT LISTS |
| | THE PRODUCT IDENTITY NUMBER FROM THE |
| | STATE. IF THE PRODUCT DOES NOT HAVE |
| | STATEWIDE APPROVAL, SUBMIT AN APPLICA- |
| | TION FOR LOCAL PRODUCT APPROVAL OR SITE |
| | SPECIFIC FORM PER RULE 9B-72. SEE |
| | ATTACHMENT. WWW.FLORIDABUILDING.ORG |
| | |
| | LOOK FOR COMMENTS BY THE OTHER PLAN |
| | REVIEW DISCIPLINES THAT MAY BE WRITTEN |
| | ON THE APPLICATION, PLANS, OR ATTACHED |
| | SEPARATELY. WHEN RESUBMITTING PLANS |
| | PLEASE CLEARLY INDICATE THE REVISION AND |
| | REMOVE AND REPLACE ANY PAGES AS NECESS- |
| | ARY. SUBMIT (1) SET OF OLD DRAWINGS WITH |
| | THE PLANS WHEN RESUBMITTING PLANS. A |
| | TRANSMITTAL LETTER LISTING THE ORIGINAL |
| | REVIEW NUMBER, WITH A DESCRIPTION OF THE |
| | REVISION MADE, IDENTIFYING THE SHEET OR |
| | SPECIFICATION PAGE WHERE THE CHANGES CAN |
| | BE FOUND, WILL HELP TO EXPEDITE YOUR |
| | PERMIT. THANK YOU FOR YOUR ANTICIPATED |
| | COOPERATION. |
| | ART LANGE |
| | BUILDING PLAN REVIEW |
| | TEL: (561)805-6672 |
| | FAX: (561)659-8026 |
