| Date |
Text |
| 2004-06-21 00:00:00 | DENIED |
| | |
| | 1) THE SITE SPECIFIC FORM LISTS THOMAS |
| | KELAHER AS THE THIRD PARTY QUALITY |
| | ASSURANCE ENTITY. MR. KELAR IS NOT |
| | LISTED WITH THE STATE AS SUCH. PLEASE |
| | REMOVE HIM FROM ITEM 7 ON THE FORM. |
| | |
| | 2) THE WIDTH OF THE LEFT PANEL OF THE |
| | ANGLE BUTT GLASS ASSEMBLY ON THE SITE |
| | SPECIFIC PRODUCT APPROVAL DIFFERS FROM |
| | THE ARCHITECTURAL PLANS. SUBMITTALS FOR |
| | SITE SPECIFIC ASSEMBLIES MUST CORRESPOND |
| | WITH THE PLANS. |
| | |
| | 3) THE SIZE OF THE TESTED ASSEMBLY IS |
| | NOT THE SAME AS THE SIZES OF THE (2) |
| | ASSEMBLIES BEING INSTALLED AND THE GLASS |
| | THICKNESS IS DIFFERENT ON THE LIVING |
| | ROOM BUTT GLASS ASSEMBLY. THEREFORE, |
| | SIGNED AND SEALED CALCULATIONS AND |
| | ASSUMPTIONS BASED ON THE TESTED UNIT ARE |
| | REQUIRED TO BE SUBMITTED IN ACCORDANCE |
| | WITH GOOD ENGINEERING PRACTICES |
| | INDICATING HOW THE DESIGN PRESSURES FOR |
| | THE ASSEMBLIES WERE DETERMINED. |
| | |
| | 4) THE BUILDING OFFICIAL REQUIRES THAT |
| | AN ENGINEER INSPECT AND APPROVE THE |
| | ASSEMBLY AND INSTALLATION OF SITE |
| | SPECIFIC (CUSTOM,ONE OF A KIND) PRODUCTS |
| | AND SUBMIT SIGNED AND SEALED LETTERS |
| | ATTESTING TO THEIR PROPER ASSEMBLY AND |
| | INSTALLATION. SUBMIT A SIGNED AND SEALED |
| | LETTER FROM THE ENGINEER THAT WILL BE |
| | DOING THE INSPECTIONS STATING THAT HE |
| | WILL DO THE REQUIRED INSPECTIONS AT TIME |
| | OF PERMIT APPLICATION. ANOTHER LETTER |
| | FROM THE ENGINEER IS REQUIRED AFTER THE |
| | INSTALLATION IS COMPLETED. |
| | |
| | IF YOU HAVE ANY QUESTIONS PLEASE CALL: |
| | ROBERT MCDOUGAL |
| | BLDG. PLAN REVIEW |
| | (561)805-6714 |
