| Date |
Text |
| 2004-03-13 00:00:00 | DENIED |
| | REFERENCE: FBC-2001 424.2 SWIMMING POOLS |
| | FBC-2001 CHAPTER 1 |
| | |
| | A) PLEASE ADJUST YOUR NOTES, DETAILS, OR |
| | SUBMITTALS TO REFLECT THE FOLLOWING IN- |
| | FORMATION REQUIRED FOR PLAN REVIEW |
| | 1) FBC-2001 SEC 424.2.6.6 ENTRAPMENT |
| | PROTECTION FOR SUCTION INLETS. (DETAIL) |
| | 2) FBC-2001424.2.6.6.3 (1,2,3) ENTRAP- |
| | MENT AVOIDANCE. (DETAIL) |
| | 3) FBC-2001424.2.6.6.4 MINIMUM OF TWO |
| | SUCTION INLETS SHALL BE PROVIDED FOR EA |
| | PUMP. SEPARATED BY A MINIMUM OF 3 FEET |
| | OR LOCATED ON TWO DIFFERENT PLANES. |
| | (DETAIL) - NO MAIN DRAINS SHOWN |
| | 4) FBC-2001424.2.6.6.5 WHERE PROVIDED, |
| | THE VACUUM OR PRESSURE CLEANER FITTING |
| | SHALL BE LOCATED AT LEAST 6" AND NOT |
| | GREATER THAN 12" BELOW THE MINIMUM OPER- |
| | ATING WATER LEVEL OR AS AN ATTACHMENT TO |
| | THE SKIMMER. |
| | 5) FBC-2001 424.2.7.2 PUMPS AND EQUIP- |
| | MENT SHALL BE MOUNTED ON A SUBSTANTIAL |
| | BASE IN A MANNER THAT WILL ELIMINATE |
| | STRAIN ON PIPING. SLAB SHALL BE A NOMIN- |
| | AL 4" THICK. (DETAIL) |
| | 6) FBC-2001 424.2.12.1 PRESSURE TESTS. |
| | PER MANUFACTURE RECOMMENDATIONS, NO AIR |
| | TEST SHALL BE APPROVED FOR PVC PIPE AND |
| | FITTINGS. (ADD TO NOTES) |
| | 7) POOL PIPING DIAGRAM SHOWS A HEATER, 2 |
| | PUMPS, FLOOR CLEANING HEADS, SPA MAIN |
| | DRAINS, THERAPY JETS, FOUNTAIN ECT. - |
| | SUBMIT A PIPING DIAGRAM THAT REFLECTS |
| | THE POOL PIPING AND EQUIPMENT THAT WILL |
| | BE INSTALLED. |
| | 8) THE PLANS THAT ARE SUBMITTED ARE UN- |
| | CLEAR AND HARD TO READ. IN SOME PLACES |
| | THEY ARE IMPOSSIBLE TO READ. PER SECTION |
| | 104.2.1 AND 104.3.1.1 OF THE CODE, TWO |
| | OR MORE COPIES OF DRAWINGS WITH SUFFICI- |
| | ENT CLAITY AND DETAIL SHALL ACCOMPANY |
| | THE APPLICATION FOR A PERMIT. |
| | 9) DELETE TITLE BLOCK FOR ENGINEER THAT |
| | IS NOT SIGNING AND SEALING PLANS. ONE |
| | TITLE BLOCK ONLY. |
| | |
| | |
| | |
| | |
| | |
| | |
| | REVIEW BY KEN STEVENS |
| | (561) 805-6721 |
| | FAX (561) 653-2692 |
| | E-MAIL [email protected] |
