| Date |
Text |
| 2004-03-06 00:00:00 | DENIED |
| | REFERENCE: FBC-2001 PLUMBING |
| | FBC-2001 CHAPTER 1 |
| | FBC-2001 CHAPTER 11 |
| | FLORIDA ADMINISTRATIVE CODE |
| | FLORIDA STATUTES |
| | |
| | 1) ALL SHEETS - METAL-TYPE IMPRESSION |
| | SEALS ARE REQUIRED PER FAC 61G15-23.001. |
| | 2) PROFESSIONAL ENGINEER SHALL SIGN HIS |
| | NAME AND AFFIX HIS SEAL TO ALL PLANS, |
| | SPECIFICATIONS, REPORTS AND FINAL BID |
| | DOCUMENTS PROVIDED TO THE OWNER OR THE |
| | OWNER'S REPRESENTATIVE, OR OTHER DOCU- |
| | MENTS PREPARED OR ISSUED BY SAID REGIS- |
| | TRANT AND BEING FILED FOR PUBLIC RECORD. |
| | THE DATE THAT THE SIGNATURE AND SEAL IS |
| | AFFIXED AS PROVIDED HEREIN SHALL BE EN- |
| | TERED ON SAID PLANS, SPECIFICATIONS, RE- |
| | PORTS, OR OTHER DOCUMENTS IMMEDIATELY |
| | UNDER THE SIGNATURE OF THE PROFESSIONAL |
| | ENGINEER, FAC 61G15-23.002(1) FS471.025 |
| | STAMPED SIGNATURES ARE NOT ACCEPTED. |
| | EACH SHEET OF PLANS AND PRINTS WHICH |
| | MUST BE SEALED UNDER THE PROVISIONS OF |
| | CHAPTER 471 SHALL BE SEALED, SIGNED AND |
| | DATED BY THE PROFESSIONAL ENGINEER IN |
| | RESPONSIBLE CHARGE. FAC 61G15-23.002(2) |
| | NO DATES ON SEALS. |
| | ENGINEERS SHALL LEGIBLY INDICATE THEIR |
| | NAME, ADDRESS AND LICENSE NUMBER ON EACH |
| | SHEET. IF PRACTICING THROUGH A DULY |
| | AUTHORIZED ENGINEERING BUSINESS, ENGIN- |
| | EERS, ENGINEERS SHALL LEGIBLY INDICATE |
| | THEIR NAME AND LICENSE NUMBER, AS WELL |
| | AS, THE NAME, ADDRESS AND CERTIFICATE OF |
| | AUTHORIZATION NUMBER OF THE ENGINEERING |
| | BUSINESS ON EACH SHEET. A TITLE BLOCK |
| | WILL SATISFY THIS REQUIREMENT. FAC |
| | 61G15-23.002(2) |
| | 3) SHT ID-2.1 SUBMIT A DETAIL FOR BREAK |
| | ROOM SHOWING 11-4.24.3 KNEE CLEARANCE, |
| | 11-4.24 DEPTH, 11-4.24.5 CLEAR FLOOR |
| | SPACE, AND 11-4.24.6 EXPOSED PIPES AND |
| | SURFACES. |
| | 4) SHT ID-2.2 SUBMIT MORE INFORMATION |
| | FOR THE TOILET ROOMS SHOWING 11-4.16.2 |
| | CLEAR FLOOR SPACE, 11-4.16.5 FLUSH CON- |
| | TROLS, (SHOWN ON WRONG SIDE DETAIL #6), |
| | 11-4.18 CLEAR FLOOR SPACE, 11-4.19.3 |
| | CLEAR FLOOR SPACE, AND 11-4.22.3 TURNING |
| | AREA. |
| | 5) SHT P-1.1 ALL DEMO'D AND CAPPED PIP- |
| | ING SHALL BE INSPECTED PRIOR TO COVERING |
| | 6) SHT P-2.1 DETAIL #5 SANITARY RISER |
| | DIAGRAM, EVERY DRY VENT SHALL RISE VERT- |
| | ICALLY TO A MINIMUM OF 6" ABOVE THE |
| | FLOOD LEVEL RIM OF THE HIGHEST TRAP OR |
| | TRAPPED FIXTURE BEING VENTED. SECTION |
| | 905.4. |
| | 7) SUBMIT THE SANITARY RISER DIAGRAM IN |
| | AN ISOMETRIC FORM. |
| | |
| | REVIEW BY KEN STEVENS |
| | (561) 805-6721 |
| | FAX (561) 653-2692 |
| | E-MAIL [email protected] |
