| Date |
Text |
| 2004-03-15 00:00:00 | DENIED |
| | REFERENCE: FBC-2001 PLUMBING |
| | FBC-2001 CHAPTER 1 |
| | FHA-98 DESIGN MANUAL |
| | FLORIDA ADMINISTRATIVE CODE |
| | FLORIDA STATUTES |
| | |
| | A) COMMENTS FROM PREVIOUS REVIEW NOT |
| | ADDRESSED. COMMENT NUMBER TO STAY THE |
| | SAME AS FIRST REVIEW TO AVOID CONFUSION. |
| | 1) INDICATE SPECIFICATION "A" OR "B" AS |
| | REQUIRED IN FHA DESIGN MANUAL REQUIRE- |
| | MENT 7B PAGES 7.34 & 7.35 - RESPONSE |
| | NOTED, BUT SPECIFICATION NOT FOUND ON |
| | SHEET A-3. |
| | 2) SHOW LAV HEIGHT PER FHA DESIGN MANUAL |
| | PAGE 9512 SECTION "V". RESPONSE NOTED |
| | BUT 36" IS INCORRECT. 34" IS MAX HEIGHT. |
| | 3) SHT A-15 GRAB BAR BLOCKING DETAILS |
| | SHALL REFLECT BACKING IN CHAPTER 6 OF |
| | THE FHA DESIGN MANUAL. - RESPONSE NOTED |
| | BUT SHEET A-19 DETAIL DOES NOT REFLECT |
| | THE DESIGN MANUAL REQUIREMENTS. |
| | 4) A SANITARY AND A WATER RISER DIAGRAM |
| | ARE REQUIRED PER SECTION 104.3.1.1. - |
| | RESPONSE NOTED, BUT NO WATER RISER DIA- |
| | GRAM HAS BEEN SUBMITTED. |
| | 8) PLANS HAVE BEEN STAMPED WITH A SIGNA- |
| | TURE STAMP. A WET SIGNATURE IS REQUIRED |
| | ON THE SEAL. NO CERTIFICATE OF AUTHORIZ- |
| | ATION IS SHOWN ON TITLE BLOCK. |
| | A PROFESSIONAL ENGINEER SHALL SIGN HIS |
| | NAME AND AFFIX HIS SEAL TO ALL PLANS, |
| | SPECIFICATIONS, REPORTS AND FINAL BID |
| | DOCUMENTS PROVIDED TO THE OWNER OR THE |
| | OWNER'S REPRESENTATIVE, OR OTHER DOCU- |
| | MENTS PREPARED OR ISSUED BY SAID REGIS- |
| | TRANT AND BEING FILED FOR PUBLIC RECORD. |
| | THE DATE THAT THE SIGNATURE AND SEAL IS |
| | AFFIXED AS PROVIDED HEREIN SHALL BE EN- |
| | TERED ON SAID PLANS, SPECIFICATIONS, RE- |
| | PORTS, OR OTHER DOCUMENTS IMMEDIATELY |
| | UNDER THE SIGNATURE OF THE PROFESSIONAL |
| | ENGINEER, FAC 61G15-23.002(1) |
| | FS 471.025 |
| | EACH SHEET OF PLANS AND PRINTS WHICH |
| | MUST BE SEALED UNDER THE PROVISIONS OF |
| | CHAPTER 471 SHALL BE SEALED, SIGNED AND |
| | DATED BY THE PROFESSIONAL ENGINEER IN |
| | RESPONSIBLE CHARGE. FAC 61G15-23.002(2) |
| | FS 471.025 |
| | ENGINEERS SHALL LEGIBLY INDICATE THEIR |
| | NAME, ADDRESS AND LICENSE NUMBER ON EACH |
| | SHEET. IF PRACTICING THROUGH A DULY |
| | AUTHORIZED ENGINEERING BUSINESS, ENGIN- |
| | EERS, ENGINEERS SHALL LEGIBLY INDICATE |
| | THEIR NAME AND LICENSE NUMBER, AS WELL |
| | AS, THE NAME, ADDRESS AND CERTIFICATE OF |
| | AUTHORIZATION NUMBER OF THE ENGINEERING |
| | BUSINESS ON EACH SHEET. A TITLE BLOCK |
| | WILL SATISFY THIS REQUIREMENT. FAC |
| | 61G15-23.002(2) - FS 471.025. |
| | **************NEW COMMENT*************** |
| | 1B) CLEAR FLOOR SPACE SHALL BE APPLIED |
| | OR SUPERIMPOSED OVER A PLAN DURING THE |
| | DESIGN PROCESS TO DETERMINE IF SPACE RE- |
| | QUIREMENTS ARE BEING MET. PAGE 7.43 OF |
| | THE DESIGN MANUAL. |
| | |
| | REVIEW BY KEN STEVENS |
| | (561) 805-6721 |
| | FAX (561) 653-2692 |
| | E-MAIL [email protected] |
