| Date |
Text |
| 2004-03-09 00:00:00 | BUILDING PLAN REVIEW: FAILED |
| | |
| | 1. REVISE NOTE #11 UNDER PLAN NOTES ON |
| | C1 TO INCLUDE AREAS IN WIND BORNE DEBRIS |
| | REGIONS WHICH ALSO REQUIRE IMPACT |
| | PROTECTION FOR GLAZEDOPENINGS. SEE |
| | FBC 1606.1.4. |
| | |
| | 2. REVISE NOTE #15 UNDER FRAMING NOTES |
| | ON C1 TO SPECIFY THAT HIGH RIB METAL |
| | LATH IS REQUIRED TO BE ATTACHED AT EACH |
| | RIB (4" O.C.) PER ASTM C 1063. |
| | |
| | 3. SPECIFY THE TRUSS BOTTOM CORD LIVE |
| | LOAD ON THE PLANS. FBC TABLE 1604.1 |
| | REQUIRES ATTICS WITHOUT STORAGE TO HAVE |
| | A LIVE LOAD OF 10 PSF AND 30 PSF FOR |
| | ATTICS WITH STORAGE. |
| | |
| | 4. GLASS BLOCK ON ZERO LOT LINE MUST BE |
| | ONE HOUR FIRE RATED. SPECIFY THIS ON |
| | PLANS. |
| | |
| | 5. REVISE THE SLIDING GLASS DOOR BUCK |
| | DETAIL TO STATE THAT THEY ARE FASTENED |
| | THROUGH THE BUCK AND NOT TO THE BUCK. |
| | |
| | 6. SPECIFY THE LENGTH/EMBED DEPTH OF THE |
| | 1/2" ANCHOR BOLTS FOR THE GARAGE DOOR |
| | BUCKS ON A4. |
| | |
| | 7. SPECIFY ON THE PLANS THAT THE DOOR |
| | FROM THE GARAGE TO CONDITIONED SPACE IS |
| | INSULATED OR SOLID CORE AS REQUIRED BY |
| | FBC CHAPTER 13 SECTION 603. |
| | |
| | 8. REVISE THE SEMCO TRUSS CONNECTOR |
| | SPECIFIED IN DETAIL 9 ON A9 TO A |
| | CURRENT ANCHOR WITH STATE OR LOCAL |
| | PRODUCT APPROVAL. |
| | |
| | 9. PRODUCT APPROVALS SUBMITTED WITH |
| | PERMIT APPLICATION AFTER OCTOBER 1, |
| | 2003 ARE REQUIRED TO COMPLY WITH THE |
| | FLORIDA PRODUCT APPROVAL SYSTEM. FOR |
| | INFORMATION PLEASE SEE THE STATE WEBSITE |
| | AT |
| | WWW.FLORIDABUILDING.ORG. PRODUCTS WITH |
| | STATEWIDE APPROVAL ARE REQUIRED TO BE |
| | SUBMITTED WITH A COVER SHEET THAT LISTS |
| | THE PRODUCT IDENTITY NUMBER FROM THE |
| | STATE. IF THE PRODUCT DOES NOT HAVE |
| | STATEWIDE APPROVAL, SUBMIT AN APPLICA- |
| | TION FOR LOCAL PRODUCT APPROVAL OR SITE |
| | SPECIFIC FORM PER RULE 9B-72. SEE |
| | WWW.FLORIDABUILDING.ORG. |
| | |
| | 10. THE GARAGE DOOR ON PLANS IS 16' WIDE |
| | THE SUBMITTAL FROM CLOPAY (DRAWING) IS |
| | FOR A MAXIMUM DOOR WIDTH OF 9'. PLEASE |
| | SUBMIT THE CORRECT DRAWING AND PRODUCT |
| | APPROVALS. |
| | |
| | |
| | ANY QUESTIONS PLEASE CALL: |
| | LEA SMITH, BUILDING PLANS EXAMINER |
| | 805-6713 |
