| Date |
Text |
| 2004-02-10 00:00:00 | ***CORRECTIONS*** |
| | |
| | SAMANTHA HILL, BUILDING PLANS EXAMINER |
| | [email protected] |
| | |
| | 1.)A NOTICE OF COMMENCEMENT MUST BE |
| | FILED WITH THE CLERK OF COURTS BEFORE A |
| | PERMIT CAN BE ISSUED. |
| | |
| | 2.)IMPACT FEES MUST BE PAID TO PALM |
| | BEACH COUNTY.THE PLANS MUST BE STAMPED |
| | AND THE RECEIPT ATTACHED TO THE |
| | APPLICATION.233-5025 |
| | |
| | 3.)SHEETS A7, A8, USP TA20R SHOULD |
| | SPECIFY 10D SIZE NAILS (NOT 10X1 1/2). |
| | CHECK ALL CONNECTORS. |
| | |
| | 4.)1 1/2" WATERSTOP REQUIRED, WALL |
| | SECTIONS SHEET A12, CITY OF WEST PALM |
| | BEACH AMENDMENTS TO THE FBC2111.1.9. |
| | |
| | 5.)PROVIDE A STRUCTURAL DETAIL FOR |
| | THE STAIRS, INCLUDE FIREBLOCKING. |
| | |
| | 6.)THE GUARDRAILS ARE TO COMPLY WITH |
| | FBC1608.2.2. |
| | |
| | 7.)THE WOOD STAIR DETAIL, A13, IS TO |
| | COMPLY WITH FBC1007.3(1), 2 RISERS AND |
| | A TREAD IS TO BE NOT LESS THAN 24" NOR |
| | MORE THAN 25". |
| | |
| | 8.)GENERAL NOTE #7, A5, STATES THAT |
| | THE STEEL MULLION DETAIL IS ON A12. |
| | WHERE IS THE STEEL MULLION TO BE |
| | INSTALLED, DETAIL NOT ON A12, SEE |
| | FBC1707.4.5 AND SHOW COMPLIANCE. |
| | |
| | 9.)THE TEST REPORT SUBMITTED FOR THE |
| | GARAGE DOOR DOES NOT HAVE FLORIDA |
| | STATEWIDE PRODUCT APPROVAL ATTACHED |
| | AS REQUIRED.HOWEVER THIS DOOR ALSO |
| | DOES NOT MEET THE DESIGN PRESSURE OF |
| | +38.4/-46.3. |
| | |
| | 10.) THE MULLION STATEWIDE PRODUCT |
| | APPROVAL SUBMITTED IS "PENDING".SUBMIT |
| | A CURRENT REPORT OR SUBMIT A SITE |
| | SPECIFIC.ALSO CIRCLE THE METHOD OF |
| | ATTACHMENT IN THE PRODUCT APPROVAL AS |
| | SOME OF THE METHODS CONTAINED IN THE |
| | PRODUCT APPROVAL DO NOT MEET THE DESIGN |
| | PRESSURE ON THE PLAN. |
| | |
| | 11.)THE SLIDING GLASS DOOR, SINGLE |
| | HUNG WINDOW, FIXED GLASS WINDOW PRODUCT |
| | APPROVALS ARE PENDING.SUBMIT SITE |
| | SPECIFIC OR CURRENT STATEWIDE APPROVAL. |
| | |
| | 12.)THE TRANSOM WINDOW OVER THE |
| | SLIDING GLASS DOOR IS 150", THE PRODUCT |
| | APPROVAL SUBMITTED HAS A LIMITATION |
| | OF 144". |
| | |
| | 13.)DESIGNER SHAPE WINDOW PRODUCT |
| | APPROVALS WERE SUBMITTED; I DO NOT |
| | SEE ANY ARCHED WINDOWS ON THE PLAN. |
| | ALSO, THIS PRODUCT APPROVAL IS ALSO |
| | PENDING. |
| | |
| | 14.)THE STATEWIDE PRODUCT APPROVALS |
| | FOR THE THERMATRU DOORS ARE FOR DOORS |
| | WITH SIDELITES; TEST REPORTS SUBMITTED |
| | DO NOT CORRESPOND WITH THE STATE |
| | PRODUCT APPROVALS SUBMITTED.ALSO |
| | STATE PRODUCT APPROVAL IS PENDING. |
| | |
| | 15.)THE FOLLOWING PRODUCT APPROVALS |
| | WERE REVIEWED AND WERE FOUND TO BE IN |
| | COMPLIANCE: |
| | WECK GLASS BLOCK |
| | ENTEGRA ROOF TILE |
| | ROBICO SHUTTERS |
