| Date |
Text |
| 2004-01-15 00:00:00 | BUILDING PLAN REVIEW |
| | PERMIT: 03121432 |
| | ADD: 1500 S OLIVE AVE |
| | CONT: BATTEN |
| | TEL: (561)662-0309 |
| | FL BLD CODE= 2001 FLORIDA BUILDING CODE |
| | |
| | 1ST REVIEW |
| | ACTION: DENIED |
| | |
| | 1) CUT SECTION 1/A-7FRONT ENTRY DOES |
| | NOT INDICATE THE GRADE OR ENTRY, STEPS |
| | OR RAMPS ETC 11-4.1.6 IF EXISTING ELE- |
| | MENTS, SPACES, OR COMMON AREAS ARE ALTER |
| | ED, THEN EACH SUCH ALTERED ELEMENT, |
| | SPACE, FEATURE OR AREA SHALL COMPLY WITH |
| | THE APPLICABLE PROVISIONS OF 11-4.1.1 |
| | TO 11-4.1.3 MINIMUIM REQUIREMENTS FOR |
| | NEW CONSTRUCTION. |
| | |
| | 2) DOOR# 1&2 BOTH SHOW INFILL BLOCK THAT |
| | THE DOOR OPENINGS ARE NEXT TO, ARE THE |
| | END CELLS GROUTED, IS THERE ANY VERTICAL |
| | STEEL? |
| | |
| | 3) CLEARSTORY, SHEET A-6 INDICATES ON |
| | THE WEST SIDE REBARS BEING WELDED TO THE |
| | BAR JOIST, NO INFORMATION ON TYPE OF |
| | WELD OR THICKNESS. |
| | |
| | 4) SAME DETAIL EAST SIDE THE DEPTH OF |
| | THE HOLE FOR THE EPOXIED REBAR IS NOT |
| | GIVEN. |
| | |
| | 5) SAME DETAIL THE METAL STUD FRAMING |
| | THAT IS FASTENED TO THE BOTTOM OF THE |
| | ROOF SLAB, TYPE OF FASTENER & SPACING? |
| | |
| | 6) THIS ALSO HOLDS TRUE FOR THE METAL |
| | FRAMING EAST OF THE CLEARSTORY. |
| | |
| | 7)THE METAL FRAMING ON THE EAST SIDE OF |
| | THE CLEARSTORY HAS A STUUCO FINISH ON |
| | WIRE LATH MISSING IS EITHER PAPER BACK |
| | LATH OR MOISTURE PROTECTION, 2303.3. |
| | |
| | 8) FLORIDA ENERGY CODE FORM 400 D FOR |
| | RENTOVATIONS OF BUILDINGS, MISSING. |
| | |
| | 9) FL BLD CODE 1606.1.5: COMPONENTS & |
| | CLADDING, PROVIDE 2 COPIES(3 IF THRESH- |
| | OLD OR RESIDENT INSPECTOR) OF PRODUCT |
| | TESTING REPORTS,MISSING REPORTS ARE AS |
| | FOLLOWS: |
| | A) WINDOWS BOTH STOREFRONT AND |
| | AWNING UNIT |
| | B) MULLIONS |
| | C) SWING DOORS BOTH GLAZED AND NON |
| | D) ROOFING ASSEMLIES, ROOFING REPORT |
| | INDICATE USE OF STANDING SEAM FAST- |
| | ENED TO CONCRETE OR GUNITE DECK |
| | E) STORM SHUTTERS IF DECISION NOT TO |
| | USE LARGE MISSLE GLAZING |
| | |
| | 10) PRODUCT APPROVALS SUBMITTED WITH |
| | PERMIT APPLICATION AFTER OCTOBER 1, 2003 |
| | ARE REQUIRED TO COMPLY WITH THE FLORIDA |
| | PRODUCT APPROVAL SYSTEM. FOR INFORMATION |
| | PLEASE SEE THE STATE WEBSITE AT |
| | WWW.FLORIDABUILDING.ORG. PRODUCTS WITH |
| | STATEWIDE APPROVAL ARE REQUIRED TO BE |
| | SUBMITTED WITH A COVER SHEET THAT LISTS |
| | THE PRODUCT IDENTITY NUMBER FROM THE |
| | STATE. IF THE PRODUCT DOES NOT HAVE |
| | STATEWIDE APPROVAL, SUBMIT AN APPLICA- |
| | TION FOR LOCAL PRODUCT APPROVAL OR SITE |
| | SPECIFIC FORM PER RULE 9B-72. SEE |
| | ATTACHMENT. WWW.FLORIDABUILDING.ORG |
| | |
| | BUILDING PLAN REVIEW |
| | JIM WITMER |
| | TEL: (561)805-6715 |
| | FAX: (561)659-8026 |
