| Date |
Text |
| 2004-01-14 00:00:00 | DENIED |
| | |
| | 1) PROVIDE COPY OF PAPERWORK FOR LOT |
| | SUBDIVISION APPROVED BY CITY ZONING |
| | DEPARTMENT AND NEW PCN FROM PALM BEACH |
| | COUNTY. |
| | |
| | 2) IMPACT FEES MUST BE PAID TO PALM |
| | BEACH COUNTY, PLANS STAMPED BY THEM AND |
| | COPY OF RECEIPT SUBMITTED TO CITY OF |
| | WEST PALM BEACH BUILDING DEPARTMENT, |
| | BEFORE A BUILDING PERMIT CAN BE ISSUED. |
| | |
| | 3) A RECORDED COPY OF THE NOTICE OF |
| | COMMENCEMENT MUST BE SUBMITTED BEFORE A |
| | PERMIT CAN BE ISSUED. |
| | |
| | 4) REVISE THE TYPE OF CONSTRUCTION FROM |
| | TYPE V TO TYPE VI. BASED ON FBC TABLE |
| | 600, THE PERCENT OF WALL ALLOWED AS |
| | OPENINGS IS EXCEEDED AND THE EXTERIOR |
| | WALLS WOULD HAVE TO HAVE A 2 HOUR FIRE |
| | RATING IF IT TYPE V UNPROTECTED |
| | CONSTRUCTION. |
| | |
| | 5) THE MAXIMUM PRESSURES FOR OPENINGS |
| | LISTED ON SHEET 1 ARE INCORRECT. SEE FBC |
| | TABLE 1606.2B, WALL ZONE 5, 140MPH WIND |
| | SPEED AND 10 SQFT EFFECTIVE WIND AREA. |
| | FOR GARAGE DOOR SEE FBC TABLE 1606.2E |
| | FOR A 9'X7' DOOR AND ROOF ANGLE GREATER |
| | THAN 10 DEGREES. |
| | |
| | 6) DETAIL 10 ON SHEET 3 FOR THE TIE BEAM |
| | DETAIL SPECIFIES ONE #5 TOP AND BOTTOM, |
| | BUT THE DRAWING SHOWS 2. PLEASE CORRECT. |
| | |
| | 7) SPECIFY THE SPACING OF THE WEDGE |
| | ANCHORS FOR THE GARAGE DOOR BUCKS IN THE |
| | DETAIL ON SHEET 5. THE DIAMETERS OF THE |
| | WEDGE ANCHORS ARE GIVEN AS 1/2" AND 3/8" |
| | PLEASE INDICATE WHICH ONE IS CORRECT. |
| | |
| | 8) PROVIDE A BUCK DETAIL FOR THE SIDE |
| | SWING DOORS. |
| | |
| | 9) STRUCTURAL NOTE #11 ON SHEET 5 CALLS |
| | FOR THE ROOF SHEATHING TO BE NAILED WITH |
| | 10D NAILS WHICH CONFLICTS WITH THE OTHER |
| | NOTES REQUIRING 8D NAILS. PLEASE CORRECT |
| | |
| | 10) THE OWNER/AGENT IS REQUIRED TO SIGN |
| | AND DATE THE ENERGY CALC. FORM. |
| | |
| | 11) PRODUCT APPROVALS SUBMITTED WITH |
| | PERMIT APPLICATION AFTER OCTOBER 1, 2003 |
| | ARE REQUIRED TO COMPLY WITH THE FLORIDA |
| | PRODUCT APPROVAL SYSTEM. FOR INFORMATION |
| | PLEASE SEE THE STATE WEBSITE AT |
| | WWW.FLORIDABUILDING.ORG. PRODUCTS WITH |
| | STATEWIDE APPROVAL ARE REQUIRED TO BE |
| | SUBMITTED WITH A COVER SHEET THAT LISTS |
| | THE PRODUCT IDENTITY NUMBER FROM THE |
| | STATE. IF THE PRODUCT DOES NOT HAVE |
| | STATEWIDE APPROVAL, SUBMIT AN APPLICA- |
| | TION FOR LOCAL PRODUCT APPROVAL OR SITE |
| | SPECIFIC FORM PER RULE 9B-72. SEE |
| | ATTACHMENT. WWW.FLORIDABUILDING.ORG |
| | SUBMIT FOR ALL WINDOWS, DOORS, ROOFING, |
| | STORM PANELS AND TRUSS CONNECTORS. |
| | |
| | 12) SUBMIT THE DRAWINGS FOR THE SINGLE |
| | HUNG WINDOWS WHICH ARE MISSING FROM THE |
| | PRODUCT APPROVAL. |
| | |
| | 13) SUBMIT PRODUCT APPROVALS FOR THE |
| | SINGLE OUTSWING DOORS AND DOUBLE |
| | OUTSWING GLAZED FRENCH DOORS. |
| | |
| | 14) SUBMIT A KEY PLAN AND INSTALLATION |
| | SCHEDULE FOR THE STORM PANELS. INDICATE |
| | THE TYPE OF MOUNT, TYPE OF ANCHORS AND |
| | ANCHOR SPACING. THIS INFORMATION IS |
| | REQUIRED AT TIME OF APPLICATION OR A |
| | SEPARATE PERMIT AND FEE WILL BE REQUIRED |
| | |
| | ROBERT MCDOUGAL |
| | BLDG. PLAN REVIEW |
| | (561)805-6714 |
