| Date |
Text |
| 2003-07-30 00:00:00 | ******CORRECTIONS****** |
| | |
| | 1.)THE AREA CALCULATIONS STATE THAT |
| | THE ADDITIONAL LIVING SPACE IS 356 |
| | SQUARE FEET, BUT THE IMPACT FEE STAMP |
| | AND THE ENERGY CALC IS FOR 264 SQUARE |
| | FEET.ALL THREE SHOULD BE CONSISTENT. |
| | PLEASE CLARIFY. |
| | |
| | 2.)STUCCO OVER WIRE LATH IS REQUIRED |
| | TO BE 3 COAT (7/8"); FBC2504.2.2, |
| | ASTM C1063. |
| | |
| | 3.)SIGN THE OWNER/AGENT LINE OF THE |
| | ENERGY CALC. |
| | |
| | 4.)SEE PREVIOUS CORRECTION LIST, ITEM |
| | #2; IMPACT PROTECTION REQUIRED FOR |
| | GLAZING FBC10606.1.4.HOW WILL SHUTTERS |
| | BE INSTALLED IN THE METAL FRAME WALL? |
| | PROVIDE A DETAIL AND A HURRICANE SHUTTER |
| | ATTACHMENT SCHEDULE, SEE ATTACHED. |
| | |
| | 5.)SEE THE PREVIOUS CORRECTION LIST, |
| | ITEM 3.THE WINDOW PRODUCT APPROVAL |
| | IS ACCEPTABLE BUT THERE WAS ONLY ONE |
| | COPY SUBMITTED.THE DOCUMENTATION |
| | SUBMITTED FOR THE SLIDING GLASS DOOR |
| | IS TO RENEW A PRODUCT APPROVAL.THE |
| | ACTUAL PRODUCT APPROVAL WAS NOT |
| | PROVIDED.PRODUCT APPROVALS FOR THE |
| | IMPACT PROTECTION WERE NOT SUBMITTED. |
| | CURRENT PRODUCT APPROVALS ARE AVAILABLE |
| | AT WWW.MIAMIDADE.GOV (FIND A DEPT, BLDG |
| | CODE COMPLIANCE, PRODUCT CONTROL, SEARCH |
| | APPROVED PRODUCTS). |
| | |
| | 6.)PROVIDE WIND DESIGN INFORMATION, |
| | FBC1606.1.7. |
| | |
| | 7.)THE SEAL MUST BE DATED FAC61G15-23. |
| | 002(1).SEE ATTACHED. |
| | |
| | 8.)IF THE ENGINEER MAKES CHANGES TO |
| | THE SEALED PLAN, HAVE THE CHANGES |
| | INITIALED AND DATED. |
| | |
| | 9.)SUBMIT BOTH COPIES OF THE 1ST |
| | SUBMITTAL WITH THE APPROVED ELECTRIC |
| | DRAWING.IF BOTH ARE NOT SUBMITTED, |
| | THE PLANS WILL REQUIRE AN ELECTRIC |
| | REVIEW WITH THE NEXT RESUB. |
| | |
| | SAMANTHA THYNG, BUILDING PLANS EXAMINER |
| | [email protected] |
