| Date |
Text |
| 2002-11-22 00:00:00 | BUILDING DENIED |
| | |
| | 1) IMPACT FEES MUST BE PAID TO PALM |
| | BEACH COUNTY, PLANS STAMPED BY THEM AND |
| | COPY OF RECEIPT SUBMITTED TO CITY OF |
| | WEST PALM BEACH BUILDING DEPARTMENT, |
| | BEFORE A BUILDING PERMIT CAN BE ISSUED. |
| | |
| | 2) A RECORDED COPY OF THE NOTICE OF |
| | COMMENCEMENT MUST BE SUBMITTED BEFORE A |
| | PERMIT CAN BE ISSUED. |
| | |
| | 3)FL. BLD CODE 1606.1.7 THE FOLLOWING |
| | INFORMATION RELATED TO WIND SHALL BE |
| | SHOWN ON THE CONSTRUCTION DRAWINGS, |
| | 1)- BASIC WIND SPEED, MPH |
| | 2)- WIND IMPORTANCE FACTOR, & BUILDING |
| | CATEGORY |
| | 3)- WIND EXPOSURE |
| | 4)- INTERNAL PRESSURE COEFFICIENT, |
| | 5)- COMPONENTS & CLADDING, THE DESIGN |
| | WIND PRESSURES IN TERMS OF PSF. |
| | INDICATE THE INTERNAL PRESSURE |
| | COEFFICIENT ON THE PLANS (+ OR - .18 FOR |
| | ENCLOSED STRUCTURES). |
| | |
| | 4) REVISE NOTE 11 ON C1, HURRICANE |
| | SHUTTERS ARE REQUIRED IN THE CITY OF WPB |
| | AND IT IS NOT LOCATED IN A HVHZ. |
| | |
| | 5) REVISE FRAMING NOTE 15 ON C1, ASTM C |
| | 1063 REQUIRES 3/8" RIB METAL LATH TO BE |
| | FASTENED AT EACH RIB (4"). |
| | |
| | 6) THE LINES DESIGNATING THE FOOTING ARE |
| | NOT INDICATED FOR ONE OF THE F6 FOOTINGS |
| | AT THE COVERED ENTRY. |
| | |
| | 7) THE FOOTING SCHEDULE ON A1 REFERS TO |
| | DETAIL 8 FOR THE F4 PAD AT THE WOOD |
| | POST. DETAIL 8 IS FOR A STEEL COLUMN. |
| | |
| | 8) SPECIFY ACCESS TO ATTIC SPACE AS |
| | REQUIRED BY FBC 2309.6. |
| | |
| | 9) SPECIFY SAFETY GLASS AT THE WINDOWS |
| | AT THE TUB IN THE LADIES GRANDE SUITE & |
| | IN HIS BATH AS REQUIRED BY FBC 2405.2. |
| | |
| | 10) REVISE THE TYPICAL WALL SECTION ON |
| | A4 FROM 6" TO 4" MINIMUM ABOVE GRADE TO |
| | FINISH FLOOR. SEE CITY AMENDMENTS |
| | 1804.1.7 AND FBC 1804.1.3. |
| | |
| | 11) SPECIFY THE REQUIRED EMBEDMENT DEPTH |
| | FOR THE 1/2" ANCHOR BOLTS AT THE GARAGE |
| | DOOR BUCKS ON A4. |
| | |
| | 12) REVISE DETAIL 13 ON A5 TO SHOW THE |
| | HANGER ON A 45 DEGREE ANGLE. |
| | |
| | 13) THE 14 ON A5 TAG ABOVE THE LIVING |
| | ROOM WINDOWS IS IN THE WRONG LOCATION. |
| | |
| | 14) DETAIL 5 ON A5 IS MISLABELED AS 5 ON |
| | A6. |
| | |
| | 15) SPECIFY THE HANGERS FOR THE 38" DEEP |
| | GIRDERS ON EACH SIDE OF THE COVERED |
| | ENTRY. |
| | |
| | 16) AN L-9 IS SPECIFIED ON SHEET A5 |
| | ABOVE THE LIVING ROOM WINDOW, HOWEVER, |
| | IT IS NOT LISTED IN THE TIE-BEAM |
| | SCHEDULE. |
| | |
| | 17) THE LINTEL ABOVE THE FRONT DOOR IS |
| | INDICATED ON A-5 AS 8"X16",BUT ON THE |
| | ELEVATION IT APPEARS TO BE 8"X8". PLEASE |
| | CLARIFY. |
| | |
| | 18) ON SHEET A6 THE WRONG DETAILS ARE |
| | SPECIFIED IN THREE PLACES. SEE THE RED |
| | LINES ON SHEET A6 AND CORRECT. |
| | |
| | 19) THE FLOOD ZONE INFORMATION GIVEN ON |
| | THE SURVEY IS NOT CORRECT. PLEASE |
| | REVISE. |
| | |
| | 20) THE CONDITIONED FLOOR AREA LISTED ON |
| | THE PLANS DIFFERS FROM THE A/C AREA ON |
| | THE PLANS. PLEASE CORRECT. |
| | |
| | 21) THE OWNER/AGENT IS REQUIRED TO SIGN |
| | AND DATE THE ENERGY CALCULATION FORM. |
| | |
| | 22) INDICATE ON THE PLANS THAT THE WALL |
| | ADJACENT TO THE GARAGE IS INSULATED AND |
| | THE DOOR IS TO BE INSULATED OR SOLID |
| | CORE WOOD PER CHAPTER 13 OF THE FBC. |
| | |
| | 23) INDICATE ON THE PLANS THE ROOF |
| | SHEATHING NAILING REQUIREMENTS AND ROOF |
| | ZONES AS REQUIRED BY THE CITY OF WPB |
| | AMENDMENTS TO FBC TABLE 2306.1. |
| | |
| | 24) PROVIDE (2) CURRENT AND COMPLETE |
| | COPIES OF SBCCI OR METRO-DADE PRODUCT |
| | APPROVALS FOR: |
| | - OUTSWING DOUBLE DOOR WITHOUT SIDELITES |
| | - SINGLE OUTSWING FRENCH DOOR |
| | - DOOR AT MECHANICAL ROOM |
| | - OVERHEAD GARAGE DOOR(INFORMATION THAT |
| | WAS SUBMITTED IS NOT ACCEPTABLE) |
| | |
| | 25) IF THE NORANDEX PRODUCTS DO NOT HAVE |
| | SBCCI OR METRO-DADE PRODUCT APPROVALS, |
| | SITE SPECIFIC ENGINEERING IS REQUIRED. |
| | THE SITE SPECIFIC PRODUCT APPROVAL FORMS |
| | ARE REQUIRED TO BE SIGNED, SEALED AND |
| | DATED BY THE ENGINEER CERTIFYING THE |
| | PRODUCT AND THE DESIGNER OF RECORD MUST |
| | SIGN, SEAL AND DATE THE FORM INDICATING |
| | THAT HE HAS REVIEWED THE PRODUCT AND IS |
| | APPROVING ITS USE IN THE STRUCTURE. THE |
| | LOCATION OF THE STRUCTURE IS TO BE |
| | SPECIFIED ON THE FORM. THE SPECIFIC |
| | PRODUCTS BEING INSTALLED ARE TO BE |
| | LISTED ON THE FORMS AND SHOWN IN THE |
| | DRAWINGS, OR AN EGINEERED ANALYSIS FOR A |
| | DIFFERENT SIZE OR SHAPE BASED ON THE |
| | TESTED PRODUCT WILL BE REQUIRED. |
| | |
| | 26) PROVIDE AN INSTALLATION SCHEDULE AND |
| | KEY PLAN FOR THE HURRICANE PANELS. |
| | |
| | ROBERT MCDOUGAL |
| | BLDG. PLAN REVIEW |
| | (561)659-8096 EXT.8202 |
