| 2023-06-09 14:18:40 | JONATHAN BROOKS JR. |
| | BUILDING PLANS EXAMINER |
| | WORK HOURS: MONDAY - FRIDAY 7:00 AM TO 3:00 PM |
| | PHONE (561) 805-6656 |
| | EMAIL: [email protected] |
| | |
| | 1ST REVIEW: FBC 2020 7TH EDITION |
| | FBC = FLORIDA BUILDING CODE, 7TH EDITION (2020) |
| | FBC B = FBC BUILDING |
| | FBC R = FBC RESIDENTIAL |
| | FBC EB = FBC EXISTING BUILDING |
| | FBC A = FBC ACCESSIBILITY |
| | FBC EC = FBC ENERGY CONSERVATION |
| | WPB A = CITY OF WEST PALM BEACH AMENMENTS TO THE FBC |
| | RESULTS: DENIED |
| | ADDRESS THE ATTACHED COMMENTS AND RE-SUBMIT |
| | TO RESUBMIT, YOU CAN EITHER DROP OFF YOUR SUBMITTAL AT |
| | CITY HALL, OR UPLOAD CORRECTIONS TO PROJECTDOX. |
| | |
| | 1. FBC B 107.2.1. CITY OF WEST PALM BEACH IS NOT |
| | LOCATED IN A HVHZ AND HAS NOT ADOPTED RAS 150. |
| | SUBMITTED MIAMI-DADE COUNTY NOA 22-00706.09 COVERS |
| | MULTIPLE ROOFING SYSTEMS TYPES A (1) THROUGH E (8). |
| | SELECT SYSTEM TYPE TO BE USED. ALL APPLICABLE DETAILS |
| | AND ATTACHMENTS MUST BE CLEARLY IDENTIFIED ON THE |
| | PRODUCT APPROVAL DRAWINGS. GENERAL LIMITATION #7 IS |
| | SPECIFICALLY REFERRED TO IN THIS NOA. SUBMIT FASTENER |
| | DENSITY CALCULATIONS PREPARED, SIGNED AND SEALED BY A |
| | FLORIDA REGISTERED PROFESSIONAL ENGINEER, REGISTERED |
| | ARCHITECT, OR REGISTERED ROOF CONSULTANT. |
| | 2. FBC B 107.2.1 SUBMITTED FORM 400 IS A PALM BEACH |
| | COUNTY BUILDING DEPARTMENT DOCUMENT AND IS NOT APPROVED |
| | FOR USE AS A SUBSTITUTE FOR SIGNED AND SEALED ENHANCED |
| | NAILING CALCULATIONS BY THE CITY OF WEST PALM BEACH |
| | BUILDING DEPARTMENT THE AUTHORITY OF JURISDICTION. |
| | GENERAL LIMITATION #7 IS SPECIFICALLY REFERRED TO IN |
| | THIS NOA. SUBMIT FASTENER DENSITY CALCULATIONS |
| | PREPARED, SIGNED AND SEALED BY A FLORIDA REGISTERED |
| | PROFESSIONAL ENGINEER, REGISTERED ARCHITECT, OR |
| | REGISTERED ROOF CONSULTANT. NOTE: THIS PROJECT IS |
| | LOCATED IN AN EXPOSURE CATEGORY D AREA. |
| | 3. SUBMITTED MIAMI-DADE COUNTY NOA 22-1221.05 COVERS |
| | MULTIPLE PRODUCTS & APPROVED ASSEMBLIES: SYSTEMS E(1) |
| | THROUGH E(4). SELECT PRODUCT & SYSTEM TO BE USED. ALL |
| | APPLICABLE DETAILS AND ATTACHMENTS MUST BE CLEARLY |
| | IDENTIFIED ON THE PRODUCT APPROVAL DRAWINGS. |
| | 4. FBC B 107.2.1 FOR CLARITY PLEASE REVISE ROOF |
| | DIAGRAM/SKETCH AND INCLUDE FLAT ROOF SLOPE(S), MEAN |
| | ROOF HEIGHT(S). FLAT/LOW SLOPE ROOFS MUST SHOW POSITIVE |
| | DRAINAGE. |
| | |
| | PLEASE NOTE THAT SUBMITTAL OF ADDITIONAL AND/OR REVISED |
| | MATERIALS MAY RESULT IN NEW PLAN REVIEW COMMENTS. |
| | |
